CONSTRUCTION
22 – 24 July 15
What is Soil Stabilization?
To produce high-quality
construction material
The earliest known example of soil improvement with lime is the Via Appia in
Rome
Adding cement stabilizes the soil and improves its bearing capacity.
Soils treated in this way are eminently suitable for the construction of all
types of roads, airports, pipelines, foundations of houses, and more
Soil Stabilization
Soil samples taken on site are subjected to mix design testing in road
laboratories in order to determine the suitability of construction materials
and construction
material mixes for the
intended application.
Soil classification
determines the type
and quantity of binding
agents to be used.
Lime Cement
Mass fraction [%]
Lime + Cement
Improves Compactibility
Water
after 8 hours:
Cement features:
From Clay Soil to a stabilized (Clay+Lime) Soil with features like a sand-gravel mix!
The purpose of this operation is mixing the binder into the soil in the
most homogeneous way possible.
Depending on the nature of the soil and the size of the construction
site.
This work will be done with FAE soil stabilizers or multi function units,
for example the FAE STABI/H or MTH.
- Machines can move about with far greater ease. Delays due to weather
conditions are reduced, leading to improved productivity.
The process takes place on-site: Special machines pulverise the existing road in-situ
and then through the addition of cement provide a deep structural repair with a
long design life. After grading, the new base is compacted to produce a strong,
durable base for either an asphalt or concrete surface.
R44
+ possible to use adapter and R44 + possible to use adapter and R44
STABI/H
105 400
Gearbox inside
of the rotor
Poly Chain Gates
Integrated Parallel axis reduction (cooled)
Internal bolted protections in Hardox to prevent the wearing from the input
material
The fuel consumption of the Fendt 936 (in this circumstance) = 50 Liter / hour
Used in Soil stabilization works to inject water in the mixing chamber to activate the
setting of the binder with the soil and to increase the natural moisture content if
necessary.
The water injection system can be used if needed to cool down the tools and is
recommended for milling the asphalt, concrete and very hard rock.
The cooling and lubricating effect prevent the overheating of the tools and the carbide
element of the tools.
The system can also be used for some liquid stabilizers like polymers.
Centrifugal pump minimum flow: 100 L / min Hydraulic motor Maximum flow rate: 55 L / min
maximum flow of: 800 L / min maximum pressure: 200 bar
Oil requirement of: 40-55 L / min
maximum pressure: 10 bar
Centrifugal pump minimum flow: 65 L / min Hydraulic motor Maximum flow rate: 50 L / min
maximum flow of: 230 L / min maximum pressure: 200 bar
Oil requirement of: 40-50 L / min
maximum pressure: 5.5 bar
Using AIS, the operator can directly set the exact quantity of liquid on the display
(l/m² - gall/sq. foot) or the volume (l/m³ - gall/cubic foot).
The AIS intelligent system adjusts itself, automatically defining the flow in the
mixing chamber according to the speed and the working depth.
In comparison to the manual flow regulation, AIS leaves no margin for errors.
Various sensors on the machine guarantee the correct automatic functioning of this
injection system.
Menu Page 1 6
4 9
5 10
Nozzle Calculator
Operation 1 6
Setting
2 7
3 8
4 9
5 10
Operation 1 6
Setting
2 7
3 8
4 9
5 10
Nozzle Activation 1 6
Page
2 7
3 8
4 9
5 10
Chassis is not as
strong as STABI H
Rotor is fix
Rotor/teeth and
chassis for easy
soils is ok and
better than the
system of Stehr ..
We have nothing to
envy! (Our system
quality is equal or
better thanks to
different teeth
options)
The edge
protections are
always up on the
site
Running speed in
soft soil at 40 cm
depth 0.7 km/hour
And a fuel
consumption of 70
Liter /hour
Running speed of
400 m/hour in hard
or compacted soil
STABI H:
gearbox option
up to 450 HP
Rubber mat to
protect the tractor
Thin chassis
STABI H:
chains
protection
on the
tractor side
Deflector made in
rubber
STABI H:
metal
damped
dozer
Blade +
opt. grid
STABI H:
Large
strong
skids
for better
floating
Belt Tensioner
Power belt
We have a Polychain
=stronger transmission
STABI H:
stronger Polychain
Pick Support
Edge protector
STABI H:
mobile
rotor
Gearbox
Sealing plate
STABI H:
Different
Technical
Solution
No variable mixing
chamber
Problems in stony
soils
- the machine has always to be + mobile rotor and No problems with the
started over the soil and than main PTO shaft thanks to the mobile rotor
pushed down with the three-point
linkage = problems with the PTO s
We offer different teeth options, A/3, A/3 HD, A/3 R44, F/3
We offer with the AIS electronic system and display which is a very helpful
and useful device for the operator
info@fae-group.com