PROFESSIONAL ENGINEERS
OF MAURITIUS
Please take an appointment with the Registrar preferably by email: kbhujun@mail.gov.mu or by phone on
698-8376 prior to coming over to the Council to submit your report
1. COVER AND BINDING • The title page and the front cover of the
• The technical report is to be submitted in document shall give the following
a bound form. While the CRPE prefers information in the order listed:
the original training report to be in a hard i) The full name of the author;
bound format, the choice on the type of ii) The branch of engineering for
binding to be used is nevertheless left to which registration is sought;
the applicant.
iii) The department or organisation
• The front cover shall be of rigid paper in which training was received;
and shall bear at least 24 pt font type. and
iv) The month and year of
2. PAPER AND TYPOGRAPHY submission.
• The document shall be typed, and printed • The table of contents shall follow the title
on one side of the paper only with 1½ page. It shall list in sequence with page
line spacing. Font used shall be “Arial” numbers all sub-divisions of the technical
and shall not be less than 12 pt in size. report.
Copies produced by xerographic • The lists of tables and illustrations, if any,
processes are acceptable. shall follow the table of contents.
• The size of the paper used shall be • Any acknowledgement shall be on the
international A4 (297 x 210mm). Paper page following the lists of tables and
shall be of good quality and of sufficient illustrations.
capacity for normal reading.
• When submitting the technical report, the
• Margins at the binding edge shall be not author shall indicate in a declaration that
less than 40mm and other margins not the report submitted is indeed his/her
less than 20mm. own work, and that there has not been
any plagiarism or infringement of
3. PAGINATION copyrights in preparing the same. The
declaration shall be as per the format
• Pages shall be numbered consecutively
enclosed, shall be signed and dated and
through the document starting with the
shall follow the acknowledgements.
title page, including appendices.
• The Supervisor’s signed certificate shall
• Page numbers shall be located centrally
Page 2 of 8
appropriate paper for binding and shall The candidates are required in this chapter
be securely fixed in the document. describe:
a. the nature of the engineering
• Illustrations shall be numbered
9:22 PM
improvement, etc.)
d. Applicants must demonstrate their c. made proposals and submitted
understanding and application of reports or comments on
basic engineering principles and engineering aspects and problem
laws of physics through the solving to seniors;
KB / Format for Technical Report220408.doc
THE REGISTRAR, COUNCIL OF REGISTERED PROFESSIONAL ENGINEERS
c/o MINISTRY OF PUBLIC INFRASTRUCTURE, LAND TRANSPORT & SHIPPING, Civil Engineering Section, Planning& Design Section, Phoenix, Mauritius
(phone) 698-8376 (FAX) 686-4506 @ (E-mail) kbhujun@mail.gov.mu (webpage) www.crpemauritius.com
4
d. been able, where authorised, to Chapter 6
bring in significant improvement to Conclusion
their engineering environment,
A concluding chapter, where the applicant is
which was measurable either
expected to tell about his own perception of
through cost monitoring, quality of
his training period, as well as any short-
product, impact upon environment
comings therein, any anticipated fields of
etc.
improvement, etc.
Council expects that the candidates will Note1 Each page of the report MUST be initialled
demonstrate their involvement on the various by the Supervisor. The Supervisor shall be
projects by reference to data tables, a registered Professional Engineer, qualified
statistics, charts, engineering formula and/or in the applicant’s field of expertise and with
specifications, diagrams, schematic etc. at least 4 years of qualified Post-
Registration experience in engineering.
Chapter 7
It is expected therefore that the candidates
for registration demonstrate that they are Summary of Competences
familiar with techniques that are utilised in A last chapter of the report shall be a
the decision process, and know at least a summary of the competences claimed in the
particular technique and its applications. training report, indexed with the core
competences required in the “CRPE
Standard for Professional Engineering
Candidates should develop awareness of the
Competence”
use of computers within their own branch of
engineering and in particular the use of The format of the competences claimed is
application software in their day to day work. included in the next section. The Summary
Page 5 of 8
24 April 2008
Application of theoretical knowledge to Engineering Solutions, Design and Research [at least 40 weeks]
Competency Paragraph reference in Training Report
Description of Requirement
Element (insert paragraph number )
2C. Ability to conduct investigations of technical issues consistent with applicant’s level of knowledge and
understanding, and ability to design and conduct experiments, analyse and interpret data towards
designing and developing an engineering solution [equivalent to 15 weeks]
Explaining observed performance; Formulating a hypothesis involving
2C1
significant dependent and independent parameters influencing for the
result.
3B. Ability to see through the operation of supply and execution of a contract.
4A Applicant to demonstrate that he/she has knowledge of the impact of engineering design on quality of
environment, health and safety, and quality of life
4B Applicant is able to recognise and assess risks to quality of life, and, consequently, to design and
implement measures and safeguards to enhance quality of environment and life, and ensure
sustainability
5A Applicant to have awareness of need for developing and enhancing his/her ability to interact with
individuals and groups, including peers, subordinates, clients, administrators, policy makers and the
public
Applicant demonstrates a good command of Language and writing
skills; is knowledgeable of techniques, skills, and modern engineering
5A1 tools, (Auto-Cad or similar package, Spreadsheets, Word processing,
graphics and communication), etc., for improving productivity and
efficiency
Recognition of Need for Broad Education, Recognition of Limits of Professional Competence, Values and Ethics
in Professional Practice, and Commitment to Life - Long learning. [Equivalent 5 weeks]
Competency Paragraph reference in Training Report
Description of Requirement
Element (insert paragraph number )
I declare having read the Council’s Code of Ethics and I understand that the CRPE is committed to
competence, meritocracy and professional behaviour.
I agree that any attempt to influence the Council or panel members or knowledge that my report contains
misreported facts or plagiarism will lead to the automatic cancellation of my scheduled interview, and
postponement of the same for a later date, to the Council’s entire discretion, but not less than six months from
the date of the originally scheduled interview.
In the event I am found worthy to become a Registered Professional Engineer, I agree on my honour to abide
by the CRPE Code of Ethics and any regulations and bye-laws which it may publish.
……………………………………………………………………………….. (Name)
……………………………………………………………………………….. (Signature)
Date: …………………………………………………..
Page 7 of 8
9:22 PM
Registration Number ………………………………… hereby declare that I was on the CRPE roll during the
applicant’s training period and was entitled to practice engineering in that period.
and that it is a true and accurate report of the depth of the engineering training received while under my
supervision.
I am satisfied with the ethics and professional conduct of the applicant in view of an eventual registration as a
Professional Engineer.
……………………………………………………………………………….. (Name)
……………………………………………………………………………….. (Signature)
Page 8 of 8
Date: …………………………………………………..
9:22 PM