This channel provides information of the Roland's best quality electronic musical instruments. Provides an overview of key features, functions and
operational tips.
Welcome to our global family. The Roland Worldwide Social Network keeps you connected to the latest products, exciting events, and much more.
×
Home
1. Home
2. Support
3.
Update history
[ Ver.3.00 ] JUL 2018
Added Tones
A total of 66 new tones have been added.
Together with the existing 62 tones, this makes for a total of 128 tones.
Please refer to the "Aerophone AE-10 Tone List" in the [ Owner's Manuals ] page for detailed information.
Functionality Improvements
The existing 62 tones were enhanced.
[ Ver.2.20 ] DEC 2017
Added Tones
Sax tones suited to jazz, pops, and rock were added.
Please refer to the "Aerophone AE-10 Tone List" in the [ Owner's Manuals ] page for detailed information.
Additional Functions
The functions described below have been added.
Please refer to the "AE-10 Ver.2.20 Notice of Added and Changed Function" in the [ Owner's Manuals ] page for detailed information.
Operation modes were added to "Bite Sensor Control Setting ( BiteCtrl )."
The following fingerings were added.
- Fingering that lets you perform using only the left hand
- Fingering that lets you perform using only the right hand
Functionality Improvements
The setting methods for "Bite Sensor Center Adjustment ( Bite Adj )" and "Bite Sensor Sensitivity Setting ( BiteSens )" were changed.
Please refer to the "AE-10 Ver.2.20 Notice of Added and Changed Function" in the [ Owner's Manuals ] page for detailed information.
Bug Fixes
The following bugs were fixed.
Sound sometimes fails to be produced when blown.
The portamento effect sometimes fails to be applied.
[ Ver.2.10 ] APR 2017
Additional Functions
Please refer to the "AE-10 Ver.2.10 Notice of Added Function" in the [ Owner's Manuals ] page for detailed information.
Support for the "AE-10 Editor" iOS app was enabled.
The following fingerings were added.
Recorder fingering
Electronic wind instrument fingering
Trumpet fingering
[ Ver.2.00 ] DEC 2016
Added Tones
A total of 15 new tones have been added.
Please refer to the "Aerophone AE-10 Tone List" in the [ Owner's Manuals ] page for detailed information.
Additional Functions
The functions described below have been added.
Please refer to the "AE-10 Errata and Added Functions on Ver.2.00" in the [ Owner's Manuals ] page for detailed information.
* The symbols in the table indicate the following setting items.
star mark: Tone Setting
S mark: System Setting
Tone volume level
Vibrato sensitivity
Amount of vibrato pitch change
Enable/disable user tone shortcuts
Key delay function
Flageolet sax fingering on/off
MIDI Control Change message output setting for breath sensor
MIDI Control Change message output setting for bite sensor
Backup function for user tones and system settings
Restore function for user tones and system settings
Delete function for user tones
Functionality Improvements
Operation of the breath and bite sensors was improved.
A setting value for breath sensitivity was added.
Bug Fixes
The following bugs were fixed.
The problem of values not being applied when switching Transpose or Octave Shift was corrected.
Please install the extracted system program file into your AE-10 according to the following procedure.
Step 1: Update the Aerophone AE-10 to Version 3.00
1. Connect the computer to the AE-10's USB port by a USB cable.
2. Hold down the octave key [ -2 ] button and turn on the power.
On the display, the message "Updater" appears, after which the message "Waiting." appears.
3. Open the "AE-10" drive folder in your personal computer.
4. Copy ae10_up.bin in the "ae10_sys_v300" folder into the "AE-10" drive by dragging and dropping it.
* Do not copy the "ae10_sys_v300" folder.
5. After copying the file is completed, remove the USB drive from the personal computer.
With Windows
Right-click on the "AE-10" icon in My Computer and execute "Eject."
With Mac
Drag the "AE-10" icon to the Trash icon in the Dock.
* Depending on the computing setup you're using, ejecting the USB drive might cause the update to start. If this happens, wait for the message "Finished" to
appear on the display before disconnecting the USB cable.
6. Disconnect the USB cable.
The update starts automatically. The update takes approximately 1 minute.
* Never switch off the power while the update is in progress.
When Finished is shown, the update has finished.
7. Turn the AE-10 power off.
If the unit you're using was at "Ver. 2.**" before the update, then the update procedure is complete. You can now use the unit at version 3.00.
If the unit you're using was at "Ver. 1.**" before the update, continue by carrying out the procedure in "Step 2: Return Settings to Their Factory-default Values (Factory
Reset)."
In 1.
no eventIshall
AGREERoland AND WISH TO PROCEED WITH DOWNLOAD.
Corporation be liable to
2.
end-users for any File
Download
damages whatsoever,
including but not limited
Support
to financial damages for
any loss of profits or
information arising from
the useTop
of, or inability to
use thisUpdates & Drivers
updater. The
foregoing provision is
Owner’s Manuals
effective even if Roland
Support
Corporation Documents
has been
advised of the possibility
Quick Start Video
of such damages.
Knowledge Base
This is a legal agreement
Support News
between you (an
Legacy
individual or a Product Info
corporation) and Read
RolandFirst
Corporation (herein
Owner's Manuals (0-9)
referred to as "Roland")
Owner's
regarding the usage of Manuals (A-G)
this software product
Owner's Manuals (H-M)
(herein referred to as
"SOFTWARE").Owner's
Please Manuals (N-S)
read carefully the terms
of this License
Owner's Manuals (T-Z)
Agreement before Update & Drivers (A-G)
Update
installing or using the & Drivers (H-M)
SOFTWARE. By
Update
installing, copying, or & Drivers (N-S)
starting the useUpdate
of the & Drivers (T-Z)
SOFTWARE, you hereby
consent to the terms of
Quick Links
this License Agreement.
BOSS
1. GRANT Product
OF LICENSE Support
Pro Audio/Video Product Support
Roland grants you the
GPL/LGPL
following non-exclusive
rights to use the
SOFTWARE in
accordance with the
terms of this License
Agreement.
(a) You may only use the
International Page
SOFTWARE on a
specificRoland Content Store
single computer
at one time. Use of the