March 2010
FSGM0465R
Green-Mode Fairchild Power Switch (FPS™)
Features Description
Soft Burst-Mode Operation for Low Standby Power The FSGM0465R is an integrated Pulse Width
Consumption and Low Noise Modulation (PWM) controller and SenseFET specifically
designed for offline Switch-Mode Power Supplies
Precision Fixed Operating Frequency: 66kHz (SMPS) with minimal external components. The PWM
Pulse-by-Pulse Current Limit controller includes an integrated fixed-frequency
oscillator, Under-Voltage Lockout (UVLO), Leading-
Various Protection Functions: Overload Protection Edge Blanking (LEB), optimized gate driver, internal
(OLP), Over-Voltage Protection (OVP), Abnormal soft-start, temperature-compensated precise current
Over-Current Protection (AOCP), Internal Thermal sources for loop compensation, and self-protection
Shutdown (TSD) with Hysteresis, Output-Short circuitry. Compared with a discrete MOSFET and PWM
Protection (OSP), and Under-Voltage Lockout controller solution, the FSGM series can reduce total
(UVLO) with Hysteresis cost, component count, size, and weight; while
Auto-Restart Mode simultaneously increasing efficiency, productivity, and
system reliability. This device provides a basic platform
Internal Startup Circuit suited for cost-effective design of a flyback converter.
Internal High-Voltage SenseFET: 650V
Built-in Soft-Start: 15ms
Applications
Power Supply for LCD TV and Monitor, STB and DVD
Combination
Ordering Information
(2)
Output Power Table
Operating
Current RDS(ON) 230VAC ± 15%(3) 85-265VAC Replaces
Part Number Package Junction
Limit (Max.) Open Open Device
Temperature Adapter
(4)
(5) Adapter
(4)
(5)
Frame Frame
TO-220F
6-Lead(1) -40°C ~
FSGM0465RWDTU 1.80A 2.6Ω 60W 70W 33W 48W FSDM0465RE
W-Forming
+125°C
TO-220F
6-Lead(1) -40°C ~
FSGM0465RUDTU 1.80A 2.6Ω 60W 70W 33W 48W FSDM0465RE
U-Forming
+125°C
TO-220F
6-Lead(1) -40°C ~
FSGM0465RLDTU 1.80A 2.6Ω 60W 70W 33W 48W FSDM0465RE
L-Forming
+125°C
Notes:
1. Pb-free package per JEDEC J-STD-020B.
2. The junction temperature can limit the maximum output power.
3. 230VAC or 100/115VAC with voltage doubler.
4. Typical continuous power in a non-ventilated enclosed adapter measured at 50°C ambient temperature.
5. Maximum practical continuous power in an open-frame design at 50°C ambient temperature.
6. VSTR
5. N.C.
4. FB
3. VCC
2. GND
1. Drain
FSGM0465R
Figure 3. Pin Configuration (Top View)
Pin Definitions
Pin # Name Description
1 Drain SenseFET Drain. High-voltage power SenseFET drain connection.
2 GND Ground. This pin is the control ground and the SenseFET source.
Power Supply. This pin is the positive supply input, which provides the internal operating
3 VCC
current for both startup and steady-state operation.
Feedback. This pin is internally connected to the inverting input of the PWM comparator.
The collector of an opto-coupler is typically tied to this pin. For stable operation, a capacitor
4 FB
should be placed between this pin and GND. If the voltage of this pin reaches 6V, the
overload protection triggers, which shuts down the FPS.
5 N.C. No connection.
Startup. This pin is connected directly, or through a resistor, to the high-voltage DC link.
At startup, the internal high-voltage current source supplies internal bias and charges the
6 VSTR
external capacitor connected to the VCC pin. Once VCC reaches 12V, the internal current
source (ICH) is disabled.
Thermal Impedance
TA=25°C unless otherwise specified.
1.20 1.20
1.15 1.15
1.10 1.10
Normalized
Normalized
1.05 1.05
1.00 1.00
0.95 0.95
0.90 0.90
0.85 0.85
0.80 0.80
-40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃ -40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃
Temperature [°C] Temperature [°C]
Figure 5. Operating Supply Current (IOP) vs. TA Figure 6. Operating Switching Current (IOPS) vs. TA
1.40 1.20
1.30 1.15
1.20 1.10
Normalized
Normalized
1.10 1.05
1.00 1.00
0.90 0.95
0.80 0.90
0.70 0.85
0.60 0.80
-40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃ -40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃
Temperature [°C] Temperature [°C]
Figure 7. Startup Charging Current (ICH) vs. TA Figure 8. Peak Drain Current Limit (ILIM) vs. TA
1.20 1.20
1.15 1.15
1.10 1.10
Normalized
Normalized
1.05 1.05
1.00 1.00
0.95 0.95
0.90 0.90
0.85 0.85
0.80 0.80
-40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃ -40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃
Temperature [°C] Temperature [°C]
Figure 9. Feedback Source Current (IFB) vs. TA Figure 10. Shutdown Delay Current (IDELAY) vs. TA
1.20 1.20
1.15 1.15
1.10 1.10
Normalized
Normalized
1.05 1.05
1.00 1.00
0.95 0.95
0.90 0.90
0.85 0.85
0.80 0.80
-40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃ -40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃
Temperature [°C] Temperature [°C]
Figure 11. UVLO Threshold Voltage (VSTART) vs. TA Figure 12. UVLO Threshold Voltage (VSTOP) vs. TA
1.20 1.20
1.15 1.15
1.10 1.10
Normalized
Normalized
1.05 1.05
1.00 1.00
0.95 0.95
0.90 0.90
0.85 0.85
0.80 0.80
-40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃ -40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃
Temperature [°C] Temperature [°C]
Figure 13. Shutdown Feedback Voltage (VSD) vs. TA Figure 14. Over-Voltage Protection (VOVP) vs. TA
1.20 1.20
1.15 1.15
1.10 1.10
Normalized
Normalized
1.05 1.05
1.00 1.00
0.95 0.95
0.90 0.90
0.85 0.85
0.80 0.80
-40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃ -40℃ -25℃ 0℃ 25℃ 50℃ 75℃ 100℃ 125℃
Temperature [°C] Temperature [°C]
Figure 15. Switching Frequency (fS) vs. TA Figure 16. Maximum Duty Ratio (DMAX) vs. TA
VO
1. Schematic
3. Winding Specification
Barrier Tape
Pin (S → F) Wire Turns Winding Method
TOP BOT Ts
Np /2 3→2 0.3φ×1 23 Solenoid Winding
4. Electrical Characteristics
Pin Specification Remark
Inductance 1-3 830μH ± 7% 67kHz, 1V
Leakage 1-3 15μH Maximum Short All Other Pins
10.16 2.74
9.96 2.34
(7.00) (0.70)
3.40 Ø3.28
3.08
3.20
(5.40) 6.90
6.50
16.07
15.67 20.00
19.00 (13.05)
24.00
23.00
(0.48)
R0.55
R0.55
8.13 1.40 3.06
0.80 2.46 (7.15)
7.13 1.20 0.70
(1.13)
0.70 2,4,6 1,3,5
1 6 0.50
0.60
2.19 1.75 0.45
1.27 3.48
2.88
3.81
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
10.36 B
9.96 2.74
2.34
(7.00) (0.70)
A
3.40 5.18 Ø3.28
3.08
3.20 4.98
(5.40)
6.88
6.48
16.07
15.67
19.97 18.94
18.97 17.94
13.05
24.00
23.00
(0.48)
R0.55
R0.55
(0.88) R0.55
8.13 1.40 0.80 5PLCS
7.13 3.06 7.15
1.20 0.70 2.46
3.81 (3.81)
7.29
6.69
NOTES:
A) NO PACKAGE STANDARD APPLIES.
4.80 B) DIMENSIONS ARE EXCLUSIVE OF BURRS,
4.40 MOLD FLASH, AND TIE BAR EXTRUSIONS.
5° 5°
C) DIMENSIONS ARE IN MILLIMETERS.
D) DRAWING FILENAME : MKT-TO220F06REV2
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
2.74
2.34
10.36 (0.70)
9.96 B
A
6.88 C
5.18 6.48
4.98
3.40
3.20
Ø3.28
3.08
16.08
15.68
(17.83)
(21.01)
(1.13) R1.00
1.30 0.85 5PLCS
1.05 0.75 #2,4,6
3.81
5° 5°
NOTES:
A) NO PACKAGE STANDARD APPLIES.
B) DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR EXTRUSIONS.
C) DIMENSIONS ARE IN MILLIMETERS.
4.80 D) DRAWING FILENAME : MKT-TO220E06REV2
4.40
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.