PLASMA TV
SERVICE MANUAL
CHASSIS : PU92C
Keep wires away from high voltage or high temperature parts. Leakage Current Hot Check circuit
AC Volt-meter
Copyright©2009 LG Electronics. Inc. All right reserved. -2- LGE Internal Use Only
Only for training and service purposes
TABLE OF CONTENTS
SPECIFICATIONS.................................................................4
BLOCK DIAGRAM...............................................................47
EXPLODED VIEW...............................................................49
SCHEMATIC DIAGRAM..........................................................
Copyright©2009 LG Electronics. Inc. All right reserved. -3- LGE Internal Use Only
Only for training and service purposes
SPECIFICATIONS
NOTE : Specifications and others are subject to change without notice for improvement.
V Application Range
This spec is applied to the PLASMA TV used PU92A/PU92C Chassis.
42PQ20-UA
50PQ20-UA
42PQ30-UA
PU92A 50PQ30-UA
NORTH AMERICA LG
42PQ60-UA
50PQ60-UA
50PS30-UB
PU92C 50PS60-UA
60PS60-UA
V Specification
Each part is tested as below without special appointment.
1) Temperature : 25±5°C
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with SBOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
V Test Method
1) Performance : LGE TV test method followed.
2) Demanded other specification
Safety : UL, CSA, IEC specification
EMC : FCC, ICES, IEC specification
42PQ20-UA
50PQ20-UA
42PQ30-UA
50PQ30-UA Safety : UL1492, CSA C22.2.No. 1
42PQ60-UA NORTH AMERICA
EMC : FCC Class B, IC Class B
50PQ60-UA
50PS30-UB
50PS60-UA
60PS60-UA
Copyright©2009 LG Electronics. Inc. All right reserved. -4- LGE Internal Use Only
Only for training and service purposes
SPECIFICATIONS
V General Specification
2) UHF : 14 ~ 69
3) DTV : 02 ~ 69
4) CATV : 01 ~ 135
5) CADTV : 01 ~ 135
6 Aspect Ratio 16 : 9
7 Tuning System FS
PDP42G2####(1024 X 768)
PDP50G2####(1365 X 768)
PDP50H3####(1920 X 1080)
PDP60H3####(1920 X 1080)
2) Humidity : ~80%
2) Humidity : 0 ~ 90%
Copyright©2009 LG Electronics. Inc. All right reserved. -5- LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTIONS
1. Application Range Caution: Set up “RF mode(noise)” after PCB assembly adjustment.
This spec sheet is applied to all of the “PU92A(HD)” and
“PU92C(FHD)” Chassis.
3. Download
(1) Execute ISP program “Mstar ISP Utility” and then click
“Config” tab.
2. Specification (2) Set as below, and then click “Auto Detect” and check “OK”
(1) Because this is not a hot chassis, it is not necessary to use message If display “Error”, Check connect computer, jig,
an isolation transformer. However, the use of isolation and set.
transformer will help protect test instrument. (3) Click “Connect” tab. If display “Can’t” , Check connect
(2) Adjustment must be done in the correct order. computer, jig, and set.
(3) The adjustment must be performed in the circumstance of
25±5cC of temperature and 65±10% of relative humidity if
there is no specific designation.
(4) The input voltage of the receiver must keep 100~240V,
50/60Hz.
(5) The receiver must be operated for about 5 minutes prior to
the adjustment when module is in the circumstance of over
15cC
- In case of keeping module is in the circumstance of 0cC,
it should be placed in the circumstance of above 15cC for
2 hours
- In case of keeping module is in the circumstance of below
-20cC, it should be placed in the circumstance of above
15cC for 3 hours.
1) Press the POWER ON KEY on R/C for adjustment. (4) Click “Read” tab, and then load download file(XXXX.bin)
2) Press the ADJ KEY on R/C and enter EZ ADJUST. by clicking “Read”
Select “4. WHITE PATTERN” by using D/E(CH +/-) and
select “White” by using F/G(VOL +/-)
Copyright©2009 LG Electronics. Inc. All right reserved. -6- LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTIONS
(2) Confirmation
1) We confirm whether “0xB6(RGB)” address of EEPROM
“0xA2” is “0xAA” or not.
2) If “0xB6(RGB)” address of EEPROM “0xB2” isn’t “0xAA”,
we adjust once more
3) We can confirm the ADC values from “0xB0~0xB5 4-3. Confirmation
(RGB)” addresses in a page “0xA2” (1) We confirm whether “0xBF(480i)/0xC8(1080i)” address of
EEPROM “0xA2” is “0xAA” or not.
[ Manual ADC process using Service Remocon. After enter (2) If “0xBF(480i)/0xC8(1080i)” address of EEPROM “0xA2”
Service Mode by pushing “ADJ” key, execute “ADC Adjust” by isn’t “0xAA”, we adjust once more
pushing “G” key at “0. ADC CALIBRATION “. (3) We can confirm the ADC values from “0xB9 ~ 0xBE(480i) /
0xC2 ~ (1080i)” addresses in a page “0xA2”
Copyright©2009 LG Electronics. Inc. All right reserved. -7- LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTIONS
Caution: Each PCB assembly must be checked by check JIG set. 2) After turning VR951, voltage of D.M.M adjustment as
(Because power PCB Assembly damages to PDP same as Vs voltage which on label of panel right/top
Module, especially be careful) (deviation ; ±0.5V)
6-3. Adjustment Method (Fig. 2) 42inch Power PCB Assy Voltage Adjustment
(1) 50” Va Adjustment (refer fig.1)
1) After receiving 100% Full White Pattern, HEAT RUN.
(5) 60” Va Adjustment (refer fig.3)
2) Connect + terminal of D.M.M. to Va pin of P802,
1) After receiving 100% Full White Pattern, HEAT RUN.
connect-terminal to GND pin of P802.
2) Connect + terminal of D.M.M. to Va pin of P11, connect
3) After turning VR902,voltage of D.M.M adjustment as
-terminal to GND pin of P11.
same as Va voltage which on label of panel right/top
3) After turning VR901,voltage of D.M.M adjustment as
(deviation; ±0.5V)
same as Va voltage which on label of panel right/top
(deviation; ±0.5V)
(2) 50” Vs Adjustment (refer fig.1)
1) Connect + terminal of D.M.M. to Vs pin of P802, connect
(6) 60” Vs Adjustment (refer fig.3)
-terminal to GND pin of P802.
1) Connect + terminal of D. M..M. to Vs pin of P11, connect
2) After turning VR901, voltage of D.M.M adjustment as
-terminal to GND pin of P11.
same as Vs voltage which on label of panel right/top
2) After turning VR951, voltage of D.M.M adjustment as
(deviation ; ±0.5V)
same as Vs voltage which on label of panel right/top
(deviation ; ±0.5V)
Copyright©2009 LG Electronics. Inc. All right reserved. -8- LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTIONS
Copyright©2009 LG Electronics. Inc. All right reserved. -9- LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTIONS
Copyright©2009 LG Electronics. Inc. All right reserved. - 10 - LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTIONS
Copyright©2009 LG Electronics. Inc. All right reserved. - 11 - LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTIONS
Copyright©2009 LG Electronics. Inc. All right reserved. - 12 - LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTIONS
Copyright©2009 LG Electronics. Inc. All right reserved. - 13 - LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTIONS
<Temperature: COOL>
- R-offset / G-offset / B-offset is set to 128
- Control R-Gain and G-Gain.
- Each gain is limited to 192
<Temperature: MEDIUM>
- R-offset / G-offset / B-offset is set to 128
- Control R-Gain and G-Gain.
- Each gain is limited to 192
<Temperature: WARM>
- R-offset / G-offset / B-offset is set to 128
- Control G-Gain and B-Gain.
- Each gain is limited to 192
10. RS-232C
Press In-start key and select 4.Baud Rate menu. Check RS-
232C after changing Baud Rate 115200.
11. OPTION
(1) Press ADJ R/C In-start key and select 0.TOOL OPTION,
1.AREA OPTION
(2) Select Model name and Country by using F/G(VOL +/-) in
accordance with destination
Copyright©2009 LG Electronics. Inc. All right reserved. - 14 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 15 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 16 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 17 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 18 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 19 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 20 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 21 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 22 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 23 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 24 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 25 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 26 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 27 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 28 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 29 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 30 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 31 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 32 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 33 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 34 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 35 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 36 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 37 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 38 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 39 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 40 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 41 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 42 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 43 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 44 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 45 - LGE Internal Use Only
Only for training and service purposes
TROUBLE SHOOTING GUIDE
Copyright©2009 LG Electronics. Inc. All right reserved. - 46 - LGE Internal Use Only
Only for training and service purposes
BLOCK DIAGRAM
Copyright©2009 LG Electronics. Inc. All right reserved. - 47 - LGE Internal Use Only
Only for training and service purposes
BLOCK DIAGRAM
Copyright©2009 LG Electronics. Inc. All right reserved. - 48 - LGE Internal Use Only
Only for training and service purposes
EXPLODED VIEW
400
601
520
602
603
900
208
206
200
250
A10
240
590
501
303
301
304
300
901
580
201
205
204
207
120
LV1
305
540
203
202
A2
302
570
560
330
310
Copyright©2009 LG Electronics. Inc. All right reserved. LGE Internal Use Only
Only for training and service purposes
MAIN(BOTTOM)
Copyright©2009 LG Electronics. Inc. All right reserved. LGE Internal Use Only
Only for training and service purposes
LED(TOP) LED(BOTTOM)
CONTROL(TOP) CONTROL(BOTTOM)
Copyright©2009 LG Electronics. Inc. All right reserved. LGE Internal Use Only
Only for training and service purposes
Feb., 2009
P/NO : MFL60621702 Printed in Korea