Anda di halaman 1dari 1

© Siemens AG 2017

SINAMICS S120 Cabinet Modules


Air-cooled units
Air-cooled units

■ Overview
Line Modules
Power is fed to the drive line-up via Line Modules, which gener- Line Connection Module
ate a DC voltage from the line voltage and, therefore, supply Circuit breaker Basic Line
energy to the Motor Modules connected to the DC link. They are Module
suitable for connection to grounded TN/TT and non-grounded
IT systems.
The Line Modules are connected to the line supply system via = Motor
Line Connection Modules and are equipped as standard G_D213_EN_00043b Module
according to Category C3. Category C3 is part of the "second
environment" (in accordance with EN 61800-3). The “second
environment” constitutes locations outside residential areas or M
industrial sites which are supplied from the medium-voltage net- 3
work via a separate transformer.
The range of Line Modules has power ratings from 132 kW to Line Connection Module with Basic Line Module >800 A
900 kW (380 V to 480 V) and from 250 kW to 1500 kW (500 V to
690 V). Furthermore, up to four identical Line Modules can be If, for example, a converter transformer is used to connect to the
connected in parallel in order to increase the power rating. line supply (12-pulse operation), it may be possible to omit line
reactors (depending on the supply conditions on site) and they
For a compact configuration, Line Connection Modules up to can be optionally deselected (option L22 for a Line Connection
input currents of 3200 A are available. Two Line Modules can be Module combined with a Basic Line Module).
operated in parallel on these Line Connection Modules.
For a compact configuration, Line Connection Modules with
The following types of Line Module are available: input currents of up to 3200 A are available. Two Basic Line
• Basic Line Modules Modules can be operated in parallel on these Line Connection
Modules. Versions with line-side fuses are available for parallel
4 • Smart Line Modules
• Active Line Modules
connections in order to provide selective protection of the indi-
vidual Basic Line Modules.
Basic Line Modules
Line Connection Module
Basic Line Modules are designed only for infeed operation,
i.e. they are not capable of recovering energy to the line supply. Basic Line
Module
If regenerative energy is produced, e.g. when the drives brake, Circuit breaker
then it must be converted to heat by means of a Braking Module
and a braking resistor.
When a Basic Line Module is used as the infeed, a line reactor
appropriate to the supply conditions must be installed. Line = Motor
reactors are generally required if two or more Basic Line Module
Modules are operated in parallel on a common supply system in
order to increase power. G_D213_EN_00044b

M
For this reason, line reactors are installed in the appropriate Line 3
Connection Module as standard.

Line Connection Module with Basic Line Modules connected in parallel


Line Connection Module
Switch disconnector Main Basic Line
with fuses contactor Module

= Motor
G_D213_EN_00042b Module

M
3

Line Connection Module with Basic Line Module ≤800 A

4/8 Siemens D 21.3 · 2017

Anda mungkin juga menyukai