Bem-vindo: ufj7ce
produtos: ASPHALT PAVER
Modelo: AP-555E ASPHALT PAVER A5D
Configuração: AP555E, BG555E Asphalt Paver A5D00001-UP (MACHINE)
POWERED BY C4.4 Engine
Teste e Ajustes
AP555E and BG555E Asphalt Pavers Propel System
Número de Mídia -KENR9803-01 Data de Publicação -01/12/2010 Data de Atualização -16/12/2010
i03875467
Personal injury can result from rotating and moving parts. Stay clear of
all rotating and moving parts.
The machine must be parked on a level surface and the engine stopped.
Attach a "Do Not Operate" or similar warning tag to the start switch
and controls before servicing, repairing, or making adjustments to the
machine.
To prevent injury or death, make sure that the area around the machine
is clear of personnel and obstructions before operating the machine.
Illustration 2 g02129774
5. Move screed lift switch (4) to the RAISE position. Completely lift the screed.
Illustration 3 g02130392
Note: The screed lift switch on both instrument panels must be in the FLOAT position in order for the
screed to lower.
8. After the screed is resting on the screed lock mechanisms, move screed lift switch (4) to the HOLD
position.
Illustration 4 g02131315
9. Move throttle control switch (6) to the LOW IDLE position. Hold the switch in this position for less
than 1 second.
10. After the engine reaches low idle, move engine start switch (7) to the OFF position.
11. Move engine start switch (7) to the ON position. Do not start the engine.
Illustration 5 g02131344
13. Press down key (9) until "Service" is highlighted on the display screen.
Illustration 7 g02131350
15. Press down key (9) until "Calibrations" is highlighted on the display screen.
Illustration 8 g02131353
17. Press down key (9) until "Steering Wheel" is highlighted on the display screen.
18. Press OK key (10) .
Illustration 9 g02131355
Illustration 10 g02131356
21. Hold the steering wheel against the left spring. Do not compress the spring.
23. Hold the steering wheel against the right spring. Do not compress the spring.
Illustration 12 g02131358
25. The display should now read "CALIBRATION COMPLETE". Push back key (11) to return to
calibration screen.
26. Push home key (8) in order to exit the calibration screen.
Illustration 13 g02129756
5. Move screed lift switch (4) to the RAISE position. Completely lift the screed.
Illustration 15 g02130392
7. Move screed lift switch (4) to the FLOAT position. Move the screed lift switch on the right instrument
panel to the FLOAT position.
Note: The screed lift switch on both instrument panels must be in the FLOAT position in order for the
screed to lower.
8. After the screed is resting on the screed lock mechanisms, move screed lift switch (4) to the HOLD
position.
Illustration 16 g02131315
9. Move throttle control switch (6) to the LOW IDLE position. Hold the switch in this position for less
than 1 second.
10. After the engine reaches low idle, move engine start switch (7) to the OFF position.
11. Move engine start switch (7) to the ON position. Do not start the engine.
Illustration 17 g02131344
Illustration 18 g02131348
13. Press down key (9) until "Service" is highlighted on the display screen.
15. Press down key (9) until "Calibrations" is highlighted on the display screen.
Illustration 20 g02131353
17. Press down key (9) until "Steering Wheel" is highlighted on the display screen.
Illustration 21 g02131416
20. Press OK key (10) .
Illustration 22 g02131421
21. Hold the steering wheel against the left spring. Do not compress the spring.
Illustration 23 g02131428
23. Hold the steering wheel against the right spring. Do not compress the spring.
25. The display should now read "CALIBRATION COMPLETE". Push back key (11) to return to
calibration screen.
26. Push home key (8) in order to exit the calibration screen.
Direitos Autorais 1993 - 2018 Caterpillar Inc. Thu Dec 20 2018 08:01:39 GMT-0200 (Horário de Verão de Brasília)
Todos os Direitos Reservados.
ufj7ce
Rede Particular Para Licenciados SIS.