Gross output Net output Net output Heat rate Gross Net effciency Frequency Shaft speed
Manufacturer Model
(MW) (CC) MW (SC) MW (kJ/kWh) effciency (%) (CC) (%) (Hz) (rpm)
GT11N2 /
2-on-1 CCPP 113,6 345 10,811 51.3 51.3 50 3610
(50 Hz)
GT11N2 /
2-on-1 CCPP 115.4 349 10,619 51.8 51.8 60 3600
(60 Hz)
GT13E2 /
Alstom 202.7 281 9474 53.5 53.5 50 3000
1-on-1 CCPP
GT24 / 2-on-1
230.7 664 9000 58.4 58.4 60 3600
CCPP
GT26 / 1-on-1
326.0 467 8933 59.5 59.5 50 3000
CCPP
GT26 / 2-on-1
326.0 935 8933 59.5 59.5 50 3,000
CCPP
THM1304-10N 10.5 Case by case 10.08 11840 30.4 Case by case 50/60 9000
MAN Diesel &
THM1304-12N 12.5 Case by case 12.00 11320 31.8 Case by case 50/60 9000
Turbo SE
GT6 6.9 Case by case 6.63 10590 34.0 Case by case 50/60 12000
Exhaust
Exhaust mass NOx emissions Start-up time Dimensions
Pressure ratio temperature Weight (tonnes) Notes
fow (kg/s) (ppmv) (minutes) LxWxH (metres)
(ºC)
15.9:1 400 526 <25 190 13.1 x 5.5 x 10.1 Dual fuel burner option available
15.9:1 400 526 <25 190 9.4 x 5.5 x 10.1 Dual fuel burner option available
18.2:1 624 501 <<25 350 11 x 5.4 x 5.5 Dual fuel burner option available
35.4:1 505 597 <<25 230 10.7 x 4 x 4.6 Dual fuel burner option available
35:1 692 603 <<25 406 12 x 4.9 x 5.5 Dual fuel burner option available
35:1 692 603 <<25 406 12 x 4.9 x 5.5 Dual fuel burner option available
Gross output Net output Net output Heat rate Gross Net effciency Frequency Shaft speed
Manufacturer Model
(MW) (CC) MW (SC) MW (kJ/kWh) effciency (%) (CC) (%) (Hz) (rpm)
OPRA Turbines
FT8-3
41 29.5 7200 (LHV) 50.1 (LVH) 50/60
Pratt & Whitney SwiftPac30
Power Systems FT8-3
84 60 7120 (LHV) 50.6 (LHV) 50/60
SwiftPac60
RB211-G62
37.7 26.7 7175 50.2 50/60 4800
DLE
RB211-GT62
39.7 28.6 7005 51.4 50/60 4800
DLE
RB211-GT61
42.6 31.1 6820 52.8 50/60 4850
DLE
RB211-H63
54 40.9 7085 50.8 50/60 6000
WLE
RB211-H63
68.3 40.9 7428 40.9 50/60 6000
WLE
Trent 60
79 61.9 6777 53.1 50 3000
DLE ISI
Trent 60
105.32 61.9 7143 50.4 50 3000
DLE ISI
Trent 60
95.3 61.9 7008 51.4 50 3000
DLE ISI
Trent 60 DLE 65.7 51 6706 53.7 50 3000
Trent 60
Rolls-Royce 109.086 66 7352 49 50 3000
WLE ISI
Trent 60
100.771 66 7213 49.9 50 3000
WLE ISI
Trent 60
76.438 60.2 6753 53.3 60 3600
DLE ISI
Trent 60
101.398 60.2 7128 50.5 60 3600
DLE ISI
Trent 60
91.9 60.2 6992 51.5 60 3600
DLE ISI
Trent 60 DLE 66.678 51.8 6714 53.6 60 3600
Trent 60
105.05 64 7414 48.6 60 3600
WLE ISI
Trent 60
97.091 64 7277 49.5 60 3600
WLE ISI
Trent 60 WLE 77.993 61.8 6993 51.5 60 3600
Exhaust
Exhaust mass NOx emissions Start-up time Dimensions
Pressure ratio temperature Weight (tonnes) Notes
fow (kg/s) (ppmv) (minutes) LxWxH (metres)
(ºC)
Gross output Net output Net output Heat rate Gross Net effciency Frequency Shaft speed
Manufacturer Model
(MW) (CC) MW (SC) MW (kJ/kWh) effciency (%) (CC) (%) (Hz) (rpm)
Manufacturer Model Year Gross output (MW) Net output (MW) Heat rate (kJ/kWh) Net effciency (%)
Exhaust
Exhaust mass NOx emissions Start-up time Dimensions
Pressure ratio temperature Weight (tonnes) Notes
fow (kg/s) (ppmv) (minutes) LxWxH (metres)
(ºC)
Frequency (Hz) Condenser pressure (inHg) Gas turbine power (MW) Steam turbine power (MW) Gas turbine power (MW) Steam turbine power (MW)
Power rating Shaft speed Dimensions Inlet temp. Inlet pressure Gas fow rate
OEM Model Type/Application Notes
(MW) (rpm) LxWxH (metres) (oC) (bar) (m3/h)
3.6 x 14
CCPP/biomass/ (30 MW turbine
industrial + generator,
applications/ typical),
GRT 5–60 4200–11000 540 125
waste-to-energy/
CSP/conventional 4.7 x 20
power plants (60MW turbine +
generator, typical)
Geothermal Depending on
GST 15–60 3000–3600
power plants confguration
CCPP/biomass/
industrial
applications/ Depending on
MT 50–150 3000–3600 565 140
waste-to-energy/ confguration
CSP/conventional
power plants
Cogneration Depending on
COMAX 100–400 3000–3600 565 140
applications confguration
Combined-cycle Depending on
STF30C 150–400 3000–3600 585/585 185/45
power plants confguration
Steam Depending on
STF25 100–350 3000–3600 540/540
power plants confguration
Steam Depending on
STF40 250–700 3000–3600 600/620 300/65
power plants confguration
Steam Depending on
STF60 500–900 3000–3600 600/620 300/65
power plantss confguration
Steam Depending on
STF100 700–1200 3000–3600 600/620 300/65
power plants confguration
50/60 Hz
GT Series Geothermal 20–150 1 to 2-cylinder Up to 240 Up to 20
applicable
50/60 Hz
MCT Series Cogeneration 100–250 1 to 2-cylinder Up to 565 Up to 140 Non-reheat
applicable
50/60 Hz
MT10 Combined cycle 40–250 1-cylinder Up to 565 Up to 140 Non-reheat
applicable
Ansaldo Energia
50/60 Hz Up to
MT20 Combined cycle 150–350 2-cylinder Up to 170 Non-reheat
applicable 565/565
50/60 Hz Up to
RT70 Fossil 400–1000 4 to 5-cylinder Up to 300 Reheat
applicable 600/620
Single-casing/ 8000,
SKODA
fossil, CCPP, up to 35 50/60 Hz up to 540 up to 140
MTD20
renewables applicable
Single-casing/ 5500 (6000),
SKODA
fossil, CCPP, up to 55 50/60 Hz up to 540 up to 140
MTD30
renewables applicable
Single-casing/
Doosan Power SKODA 50/60 Hz up to
fossil, CCPP, up to 180 up to 165 Reheating
Systems MTD40 applicable 580/580
renewables
Single-casing/
SKODA 50/60 Hz up to
fossil, CCPP, up to 250 up to 180 Reheating
MTD50 applicable 580/580
renewables
Single-casing/
SKODA 50/60 Hz up to
fossil, CCPP, up to 400 up to 180 Reheating
MTD60 applicable 600/600
renewables
Power rating Shaft speed Dimensions Inlet temp. Inlet pressure Gas fow rate
OEM Model Type/Application Notes
(MW) (rpm) LxWxH (metres) (oC) (bar) (m3/h)
up to 580 up to 180,
SKODA 50/60 Hz
Multi-casing/fossil up to 800 /600, (USC (USC up to Reheating
Doosan Power MTD70 applicable
600/610)” 300 )
Systems
SKODA Multi-casing/ 50/60 Hz Saturated
up to 1200 40 –70 Reheating
MTD80 nuclear applicable steam
Standard 50/60 Hz
Power generation 2–160 540 140
turbines applicable
Combined heat
and power
50 Hz
MARC 1 generation for 2–4 450 65
applicable
renewable energy
and WtE
Power rating Shaft speed Dimensions Inlet temp. Inlet pressure Gas fow rate
OEM Model Type/Application Notes
(MW) (rpm) LxWxH (metres) (oC) (bar) (m3/h)
Condensing
turbine, with steam
𰐳T-30/40-2,9 reheat for industrial 30/40 3000 9.8 x 5.3 x 4.3 410 2.9 220
purposes and
district heating/TPP
Condensing
turbine, with steam
𰐳T-65/75-
reheat for industrial 65/75 3000 14.3 x 5.3 x 4.2 555 12.8 400
130/13
purposes and
district heating/TPP
Backpresure
P-50/60-130 50/60 3000 8.9 x 3.6 x 4.6 555 12.8 490
turbine / TPP
Condensing
turbine, with
𰐳T-90/100- steam reheat for
91 3000 14.8 x 6.5 x 4 555 12.8 470
130/13-1M industrial purposes
and district
heating/TPP
Backpresure
P-85-8,8/0,2 85 3000 9.5 x 3.6 x 2.43 535 8.8 450
turbine/TPP
Condensing
turbine, with steam
KT-115-8,8 extraction for 115 3000 14.4 x 5.6 x 2.9 500 8.8 446
Power Machines district heating
/TPP
Condensing
K-210-130-8 210 3000 19 x 6.5 x 5.5 540 12.8 640
turbine/TPP
Condensing
K-255-162-2 255 3000 22.7 x 11.4 x 6.8 540 15.9 700
turbine/TPP
Condensing
K-165-130 165 3000 14.6 x 7.6 x 5.8 540 12.8 480
turbine/TPP
Condensing
K-225-12,8-3 225 3000 20 x 8.5 x 5.7 540 12.8 540
turbine/TPP
Condensing
K-168-107 167 3000 17.1 x 8.5 x 5.7 525 10.5 442
turbine/TPP
Condensing
K-110-6,5 110/114 3000 16.4 x 8.5 x 5.7 497 6.5 309.3
turbine/CCP
Condensing
K-110-140 110/123 3000 17.2 x 5 x 5.2 535 13.7 326
turbine/TPP
Condensing
T-120-12,8 120 3000 14.9 x 5.9 x 5.1 565 12.8 470
turbine/TPP
Condensing
T-125/150-7,4 125 3000 16.6 x 8.5 x 5.7 500 7.4 525
turbine/CCP
Power rating Shaft speed Dimensions Inlet temp. Inlet pressure Gas fow rate
OEM Model Type/Application Notes
(MW) (rpm) LxWxH (metres) (oC) (bar) (m3/h)
T-130/160- Condensing
130/160 3000 15.3 x 8.5 x 5.5 555 12.8 500
12,8 turbine/TPP
Extraction turbine/
T-150-7,7 150/160 3000 17 x 8.5 x 5.7 510 7.7 309.3
CCP
Condensing
K-300-170-1P 300/310 3000 24.7 x 11.4 x 6.9 540 16.7 960
turbine/NPP
Condensing
K-330-23,5 330 3000 21.2 x 8.9 x 6.1 540 23.5 1050
turbine/TPP
K-800- Condensing
Power Machines 885 3000 41.6 x 11.4 x 6.9 485 12.8 3180
130/3000 turbine /TPP
Condensing
K-660-247 660/686 3000 36.5 x 9.8 x 6 537 24.3 2023.8
turbine/TPP
K-1000- Condensing
1030 3000 51.8 x 11.4 x 6.9 274.3 5.88 5870
60/3000 turbine/NPP
K-1000- Condensing
995 3000 41.8 x 11.4 x 6.9 274.3 5.88 5980
60/3000-2 turbine/NPP
K-1000- Condensing
1014 3000 33.8 x 16.3 x 7.8 274.3 5.88 5980
60/3000-3 turbine/NPP
Condensing
K-1200-6,8/50 1200 3000 53 x 11.4 x 6.9 505 6.8 4793
turbine/NPP