Anda di halaman 1dari 4

TROIDON 44 XP

Front face jumbo for small sections

Front face drilling rig, electric-hydraulic, of 1.3 m width for tunneling in underground mining and civil
works, for small sections, from 2.5 x 2.5 m up to 4.2 x 4.2 m.

It incorporates the fastest rock drill of the market, Montabert HC 95 of 22 kW, equipped with Back
Hammering to prevent rods stuck. The boom is 4AP model, with parallel holding and 1.2 m boom
extension.

Carrier for heavy duty application, articulated 4WD, self propelled by Deutz diesel engine. Hydrostatic
transmission Poclain / Sauer Danfoss.

The direct control system pilot hydraulically makes this rig highly reliable for operation.

www.resemin.com
Troidon 44 XP Technical specifications

SPECIFICATIONS

DRIFTER CARRIER
• Model Montabert, HC95 • Model C44.2
• Percussion power 22 kW • Diesel engine Deutz BF4L914
• Percussion pressure 180 Bar • Power 72.4 kW @ 2300 rpm
• Frequency percussion 68 Hz • Exhaust catalyst Standard
• Rotation speed 0 - 270 rpm • Transmission Hydrostatic
• Rotation torque 750 Nm • Transmission pump Saur Danfos
• Hole diameter 51 - 89 mm • Hydrostatic motor Poclain
• Rhymed diameter 75 - 127 mm • Rear axle oscillating ± 8°
• Lub air consumption 6 l/s (a 2.5 bar) • Positioning pump Parker, P315 B
• Lub oil consumption 0.8 cc/min • Service brakes Separate
• Water consumption 3 - 4 l/s (to 9 bar) • Emergency and parking brakes SAHR (Spring Applied
• Shank adapter T38, T45, Male • Tyres Hydraulic Release)
• Weight 185 kg • Steering (articulated carrier) 8.25 x R15
• Hydraulic jacks ±41°
• Battery 2 extendable front, 2 rear
• Electric system 2x12 V, 90 Ah
• Gradeability 24 VDC
FEED • Tramming speed 15%
• Model RE 2500 Series
• Flat - 11 kph
• Advance drilling Hydraulic cylinder and steel rope
• Canopy 15% - 7 kph
• Feed force 25 kN
• Tramming lights FOPS / ROPS
• Feed extension 715mm
• Centralized lubrication system 8X, Halógeno 65W HD, 24 V
• Standard feed 8 ft rods
• Drilling lubrication system SKF
• Options 12 ft, 8 - 14 telescopic ft
• Automatic fire suppression SKF
system ANSUL, 6 nozzles
• Fire extinguisher 1x6kg, Type ABC
• High-pressure washing system
• Reel grease gun
BOOM
• Model Boom 4 AP
• Automatic parallelism
• Coverage area 23 m2
• Boom extension 1200 mm
• Angle lift +45°/ -25°
• Swing angle ± 30°
• Feed roll-over 360°
• Hydraulic cylinders Parker

www.resemin.com
Troidon 44 XP Technical specifications

HYDRAULIC CONTROL ELECTRIC SYSTEM


SYSTEM • Electric motor ABB - 75kW / 100 HP
• Direct control valve Parker KA18 • Voltages 380 - 440 - 550 - 690 -1000 VAC
• Percussion pump (compensated • Frecuency 50 - 60 Hz
pressure) Rexroth A10VO100 • Starting method Star - Delta
• Double rotation pump Parker PGP620 • Option to 1000 VAC Direct start
• Working pressure 180 bar • Overload protection and
• Hydraulic oil tank volume 130 l ground fault Schneider, Module VIGI
• Hydraulic return filter Parker, 20μ • Percussion hour meter In the control panel
• Hydraulic pressure filter Parker, 10μ • Phase sequence indicator Siemens
• Saturation hydraulic filter indicator Parker • Battery charger 32 VAC, 300W, 13A
• Indicator of low oil Hydac • Electric transformer 3,5 kVA
• Indicator temperature oil Hydac • Working lights 2X, LED N44, 50W, 6700 lm, 24 V
• Electric cable reel 90 m
• Electric cable 3X1/0 - AWG (50mm)
• Electric panel Protection degree IP 55
WATER AND AIR SYSTEM
• Compressor LE7-10UV
• Maximum capacity 13.6 l/s
• Working pressure 10 Bar
• Water pump with hydraulic
motor Grundfoss, CR5 - 9
• Maximum capacity 6.9 m3/h
• Minimum inlet pressure 2 bar
• Bowman cooler FG-120, 48.6 GPM, 20 bar

www.resemin.com
Troidon 44 XP

www.resemin.com
DIMENSIONS

Total Weight

COVERAGE AREA
10, 500 Kg.

TURN RADIO
Technical specifications

Rev. 160915 ©Copyright 2016 RESEMIN. Specifications and equipment are subject to change without further notice.

Anda mungkin juga menyukai