Units== The sheets by default units will be assigned using this (Not on display but actual
calculations)
Dimensions/ Scale=== The display measurement can be set using this command “ D”
Limits== To set the limits of the sheet use “ Limits”
Line== L
Ortho == F8
Closed figure== C
Undo== U
Origin at Bottom of Screen== UCS
Construction Line XL= Continuous Line without endpoints
Polyline= PL = Can construct many lines connected to each other. (Poly= many in one)
Arc/ halfwidth(Thickness)
Polyline to line conversion= Xplode
Dimension scale== Dimscale= for setting the size of dimensions
Polygon= POL
Arc== A And then various kinds of arc listed in drop down menu
Rectangle== REC
L5= Limits/ Units/ Dimensions
L9= Poly-Line
L12= Polygon
L13= Arc
L15= Circle
L17= Spline
L18= Ellipse
L19= Dugout
L20= Block
L21= Helix
L24= Text
L38= Extend
L42= Chamfer
L53= Table
L54= Multi-Line
L55-56= Layers
L60= Leaders