0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
27 tayangan1 halaman
The document provides dimensions for a bend test jig upper body. It specifies that the upper body is 170mm long and 50mm wide, with a 10mm radius on one end. All dimensions are in millimeters. The material is carbon steel, with no surface treatment specified. It was drawn by Pham Lai on January 6, 2014 for Pioneer Drilling Co. in Vietnam.
The document provides dimensions for a bend test jig upper body. It specifies that the upper body is 170mm long and 50mm wide, with a 10mm radius on one end. All dimensions are in millimeters. The material is carbon steel, with no surface treatment specified. It was drawn by Pham Lai on January 6, 2014 for Pioneer Drilling Co. in Vietnam.
The document provides dimensions for a bend test jig upper body. It specifies that the upper body is 170mm long and 50mm wide, with a 10mm radius on one end. All dimensions are in millimeters. The material is carbon steel, with no surface treatment specified. It was drawn by Pham Lai on January 6, 2014 for Pioneer Drilling Co. in Vietnam.
Material: Thép Carbon MATERIAL: REV . BY REV TOLERANCE UNLESS OTHER WISE SURFACE TREATMENT DO NOT SCALE PIONEER DRILLING CO,.LTD N/A LONG THANH,DONG NAI,VIET NAM SPECIFIED DRAWN BY DATE TEL: +84-61-3514733 - +84-61-3514735 PHAM LAI 06.01.2014 EMAIL: mfg.tp@pioneer-gundrilling.com .X ANGLES 0.50 0.5 CHECKD BY DATE Bend Test Jig - Upper Body .XX 0.25 125 AA 101 APPROVED BY DATE ON ALL EST. WEIGHT SUPERSEDES SCALE INITIAL USE B/M .XXX 0.12 MACHINED SURFACES SHEET 1 OF 1 DRAWING NUMBER