configurations
Eric Scerri
Department of Chemistry & Biochemistry
UCLA
Los Angeles, CA 90095
website: http://ericscerri.com
The error comes from what may be an innocent attempt to simplify matters or maybe just
an understandable slip as I will try to explain. Whatever the cause there is no excuse for
perpetuating this educational myth as I will try to explain.
The next ingredient is a knowledge of the atomic orbitals into which the electrons are
progressively placed in an attempt to reproduce the natural sequence of electrons in atoms
that occur in the real world. Oddly enough these orbitals, at least in their simplest form,
nowadays come from solving the Schroö dinger equation for the hydrogen atom but let’s not
get too sidetracked for the moment.
The orbitals
The different atomic orbitals come in various kinds that are distinguished by labels such as
s, p, d and f. Each shell of electrons can be broken down into various orbitals and as we
move away from the nucleus each shell contains a progressively larger number of kinds of
orbitals. Here is the well-known scheme,
The next part is that one needs to know how many of these orbitals occur in each shell. The
answer is provided by the simple formula 2(l+ 1) where l takes different values depending
on whether we are speaking of s, p, d or f orbitals.
As a result there are potentially one s orbital, three p orbitals, five d orbitals, seven f orbitals
and so on for each shell.
So far so good. Now comes the magic ingredient which claims to predict the order of filling
of these orbitals and here is where the fallacy lurks. Rather than filling the shells around
the nucleus in a simple sequential sequence, where each shell must fill completely before
moving onto the next shell, we are told that the correct procedure is more complicated.
But we are also reassured that there is a nice simple pattern that governs the order of shell
and consequently of orbitals filling.
And this is finally the point at which the aufbau diagram, which I am going to claim lies at
the heart of the trouble, is trotted out.
The order of filling is said to be obtained by starting at the top of the diagram and following
the arrows pointing downwards and towards the left-hand margin of this diagram.
Following this procedure gives us the order of filling of orbitals with electrons according to
this sequence,
This recipe when combined with a knowledge of how many electrons can be
accommodated in each kind of orbital and the number of such available orbital in each shell
is now supposed to give us a prediction of the complete electronic configuration of all but
about 20 atoms in which further irregularities occur, such as the cases of chromium and
copper. Again I don’t want to get side-tracked and so will concentrate on one of the far
more numerous regular configurations.
Some examples
To see how this simplified and ultimately flawed method works let me consider a few
examples. The atom of magnesium has a total of 12 electrons. Using the method above this
means that we obtain an electronic configuration of,
in beautiful agreement with experiments which can examine the configuration directly
through the spectra of atoms. Let’s look at another example, an atom of calcium which has
20 electrons. Following the well-known method gives a configuration of,
1s2, 2s2, 2p6, 3s2, 3p6, 4s2
and once again there is perfect agreement with experiments on the spectrum of calcium
atoms.
But now let’s see what happens for the very next atom, namely scandium with its 21
electrons. According to the time honored aufbau method the configuration should be,
and indeed it is. But many books proceed to spoil the whole thing by claiming, not
unreasonably perhaps, that the final electron to enter the atom of scandium is a 3d electron
when in fact experiments point quite clearly to the fact that the 3d orbital is
filled before the 4s orbital. The correct version can be found in very few textbooks but
seems to have been unwittingly forgotten or distorted in many cases by generations of
instructors and textbook authors as I mentioned at the outset. How can such an odd
situation arise?
Sc3+ (tri-positive ion) 1s2, 2s2, 2p6, 3s2, 3p6, 3d0, 4s0
Sc2+ (di-positive ion) 1s2, 2s2, 2p6, 3s2, 3p6, 3d1, 4s0
Sc1+ (mono-positive ion) 1s2, 2s2, 2p6, 3s2, 3p6, 3d1, 4s1
Sc (neutral atom) 1s2, 2s2, 2p6, 3s2, 3p6, 3d1, 4s2
On moving from the Sc3+ ion to that of Sc2+ it is plain to see that the additional electron
enters a 3d orbital and not a 4s orbital as the sloppy scheme dictates. Similarly on moving
from this ion to the Sc1+ ion the additional electron enters a 4s orbital as it does in finally
arriving at neutral scandium atom or Sc. Similar patterns and sequences are observed for
the subsequent atoms in the periodic table including titatium, vanadium, chromium(with
further complications), manganese and so on.
Psychological factors
I have been thinking about what psychological factors contribute to the retention of the
sloppy aufbau. As I already mentioned it does give the correct overall configuration for all
but about 20 atoms that show anomalous configurations, such as chromium, copper,
molybdenum and many others.
Another factor is that it gives chemistry professors the impression that they really can
predict the way in which the atom is built-up starting from a bare nucleus to which
electrons are successively added. Presumably it also gives students the impression that
they can make similar predictions and perhaps convinces them of the worthiness of the
aufbau and scientific knowledge in general.
The fact remains that it is not possible to predict the configuration in any of the transition
metals, and indeed the lanthanides, or if it comes down to it even the p-block elements.
Let’s go back to scandium. Contrary to the sloppy aufbau that is almost invariably taught,
the 3d orbitals have a lower energy than 4s starting with this element. If we were to try to
predict the way that the electrons fill in scandium we might suppose that the final three
electrons after the core argon configuration of
1s2, 2s2, 2p6, 3s2, 3p6
None of this can be predicted in simple terms from a rule of thumb and so it seems almost
worth masking this fact by claiming that the overall configuration can be predicted, at least
as far as the cases in which two electrons are pushed up into the relevant s orbital. To those
who like to present a rather triumphal image of science it is too much to admit that we
cannot make these predictions. The use of the sloppy aufbau seems to avoid this problem
since it gives the correct overall configuration and hardly anybody smells a rat.
The slightly unsettling feature is that although the relevant s orbital can relieve such
additional electron-electron repulsion different atoms do not always choose to make full
use of this form of sheltering because the situation is more complicated than the way in
which I have described it. After all there is the fact that nuclear charge increases as we
move through the atoms. At the end of the day there is a complicated set of interactions
between the electrons and the nucleus as well as between the electrons themselves. This is
what ultimately produces an electronic configuration and contrary to what some educators
would wish for, there is no simple qualitative rule of thumb that can cope with this
complicated situation.
Bottom line
There is absolutely no reason for chemistry professors and textbook authors to continue to
teach the sloppy version of the aufbau. Not only does it give false predictions regarding the
order of electron filling in atoms but it also causes authors and instructors to tell further
educational lies. They are forced to invent some elaborate explanations in order to undo
the error in an attempt to explain why 4s is occupied preferentially (which it is not) but also
preferentially ionized which it is.
The sloppy version also implies that the 4s orbital has a lower energy than 3d for all atoms
which is not the case, or that the 5s orbital has a lower energy than 4d which is not the case
for all atoms and so on. Similar issues arise in the f-block elements.
It is high time that the teaching of aufbau and electronic configurations were carried out
properly in order to reflect the truth of the matter rather than taking a short-cut and
compounding it with a further imaginary story.
References
The following references are among the few that give the correct explanation;
S-G. Wang, W. H. E. Schwarz, Angew. Chem. Int. Ed. 2009, 48, 19, 3404–3415.
D.W. Oxtoby, H.P. Gillis, A. Campion, Principles of Modern Chemistry, Sixth Edition,
Thomson/Brooks Cole, 2007.