2 3
www.PyleUSA.com www.PyleUSA.com
2. ACCESSORIES
3. Product Safety Information
WARNING: Failure in following these safety instructions may cause
damage and danger!
• Never drop or slam into this device, or it will cause serious damage or
its failure to work properly.
• Do not open or disassemble the device, because there are no parts for
maintenance inside.
• This product is not appropriate to use in humid and hot environment.
Please do not place into water or any liquid, keep it under the blazing
sun for quite a long time or put it into fire because battery will
explode or may start fire.
• If it lies idle for a long time, please charge and discharge it once every
two months.
4. Keyboard Functions
LCD Display
Earphone Output
Menu / Confirm
Power / Hold Button
Next/FF
Back Line Output
Last/FR
Play / Pause
4 5
www.PyleUSA.com www.PyleUSA.com
CHAPTER II: FAST OPERATION 4. Reset
Reference: Short-press means clicking and releasing the button while If the player crashes, press the RESET key and reset the system and shut
Long-press, releasing the button after pressing and holding down the down the device. If won’t start up, please check the battery if there’s no
button 2 ~ 3 seconds. power.
1. Startup 5. Pause
Suspend the current music
Long-press the power switch
for 3 seconds until the display
shows the startup interface Press PLAY button to pause while playing,
PLAY / PAUSE
then press it again to continue playing.
2. Shutdown
6. Music File Select
In the playback interface, rotate the wheel and the
Long-press the power switch
SEE YOU screen will display the listed music files or press
for 3 seconds until the player
the BACK key to return to the main interface first,
shuts down.
and then select the File Browsing to enter the
music file list. Select your desired songs by
pressing the or key and you can play them
3. Lock after pressing the PLAY/PAUSE key.
6 7
www.PyleUSA.com www.PyleUSA.com
7. Next /FF (Fast Forward), Last / FR (Fast Rewind) Chapter III: File Management and Playback
1. FR for Rewind 1. File Delete
Suspend the current music In the main menu, enter the file menu by pressing the MENU key and
find the file to delete. Select item by pressing the key once and confirm
In the playback interface, press the “ ” key to whether to delete it by pressing the key again. To quit delete, press the
switch to the last music. The long-press the BACK key.
key means fast reverse. (Note: Please backup the files to delete or it can’t be recovered after
deleting)
8 9
www.PyleUSA.com www.PyleUSA.com
5. My Favorite Memory mode: Memorize the volume set when the device is turned
In the main menu, press the or key to select my favorite menu. off the previous time.
Short-pressing the MENU key, you can respectively enter such lists as Custom mode: Memorize the customized volume
4. Line level: For audio range of line output, there are such outputs for
My Favorite [1], My Favorite [2] and My Favorite [3], where all the
option as volume synchronization, -6DB and 0DB.
categories are your favorite.
Volume synchronization: The sound range of line output is controlled
1. Add to my favorite: In the main menu, press or key to select by volume adjustment.
the menu of the song category. After entering all the music lists via -6DB: Volume adjustment doesn’t control the sound range of line
pressing the MENU key, press the or key, select the songs that output, but the fixed -6DB range of output does.
0DB: Volume adjustment doesn’t control the sound range of line
need to be added to my favorite. After that, press the MENU key and
output, but the fixed 0DB range of output does.
confirm such an addition.
Note: Line output means LINE OUT.
2. Delete the marks of my favorite: In the main menu state, press the
or key to select the menu of my favorite. Then, select the CHAPTER IV: SYSTEM SETTING
songs to delete and confirm by pressing the MENU key. After that, In the main menu, press the or key to select the setting menu.
select the DELETE FROM PLAYLIST system to clear the marks of my Short-press the MENU key, select and set one from language,
favorite. If you select the DELETE FROM PLAYLIST system, you will clear song-bank updating, backlight timer, timed shutdown, information,
all the marks in a certain list of my favorite. auto upgrading, equipment formatting and factory setting in the
menu.
6. Playback Setting
In the main menu, press the or key to select the menu of my 1. Language
favorite. Short-pressing the MENU key, you can select one from This device can be set in one of multiple languages such as English and
others.
random play, repeat play, startup volume and line level in the menu.
1. Random play: In the state where random play is on, the system will 2. Song List Updating
not play in the backup sequence, but play through random selection. The system will re-update the playlist after you select the menu of
2. Repeat play: In the repeat play menu, there are respectively Repeat updating the song-bank.
Play Off, Single Repeat and All Repeat for your option. Press the MENU 3. Backlight Timer
key and you can select the play mode. For the lighting time of the backlight timer, there are separately 10, 20
3. Startup volume: For start up volume there are such two modes as and 30 seconds for setting. If the keys are not pressed after the selected
time is set, the device will start the screensaver for power saving in the
memory and custom.
set time.
10 11
www.PyleUSA.com www.PyleUSA.com
4. Shutdown Timer 2. File Upload & Download
Shutdown Timer means the forced shutdown in the playback state. Under Windows system, this device will show the disk drive number.
Press the or key to select or set the shutdown time. The
shutdown time is selectable among 1-99 minutes. Selection can be
determined by pressing the MENU key.
3.Disconnecting A Computer
5. Information After the file transfer ends, please close
Information: There is such information for inquiry as software version
MY Computer or Explorer and
of player and disk space.
then pull out the cable as follows:
6. Auto Upgrading
This device supports local upgrading. When a new firmware is released For users with operating systems such as WINDOWS 2000 and
officially, it can be copied to the disk system for auto upgrading. WINDOWS 2000, please proceed in the operating steps shown below:
7. Equipment Formatting • Click the green arrowhead at the lower right corner of the computer.
Equipment Formatting: Pressing the MENU key to enter the interface • Click the Stop USB Disk – Driver.
first, and then press the or key to select whether to format the
equipment. After that, you can confirm it and quit by pressing the
MENU key (Note: All the data can’t be recovered after formatting).
• Click OK and pull out the USB cable, after the dialog box Safely
8. Factory Setting Remove Hardware appears.
Factory Setting: Restore the device to factory setting
CHAPTER V: CONNECTING A COMPUTER
1. Connecting A Computer
To download and upload files, please
connect the USB socket to a PC and this
device with supporting USB cable, after Reference: The image tips for different operating systems are slightly
which this device will start up automatically. different. The above photo is for reference only.
For the first connection, the computer will 4. Battery & Charging
prompt you to create the driver information This device has the built-in lithium battery. It can be charged via
base and find new hardware and then it will connecting this device with USB cable. The battery icon during
automatically detect this device. At this time, charging will move circularly. After the battery is fully charged , the
the screen will show image that means corresponding icon ( ) will appear. Battery can be fully charged for
successful connection. about 2.5 hours.
Note: You can charge using an adapter or by using a 5V and 1A
maximum output charger.
12 13
www.PyleUSA.com www.PyleUSA.com
5. Fault Diagnosis 6. Troubleshooting
• No display appears in the player after the Start key is pressed. • Files from the player can’t be deleted through the management
Fault Cause and Correction: when the lithium battery is out of software? Or “Delete Fail or Delete Error” prompted during file delete
power, please charge it without delay. from the player?
If the player crashes, press the "RESET" key to reset the system to Please check through My Computer whether the files in the player
restart the device; if you still cannot start the player, please confirm are read-only. Modify the read-only attribute to the archive
whether the battery is dead attribute first, then delete them.
• The player can’t play sound during file playback. • As a mobile hard disk, is it necessary to install drive in WINDOWS
Fault Cause and Correction: Check if f the volume is too low and XP/VISTA/WINDOWS 7?
adjust it; if no music files are found in the player, please download No need. It doesn’t support WINDOWS98 operating system.
them.
• Music files can’t be downloaded after connection. 7. Technical Specifications
Fault Cause and Correction: Your mainboard may not be supported PRODUCT NAME Lossless Music Player
by the USB interface. You must upgrade your mainboard driver MEMORY CAPACITY Built-in 16G/32G/64G/128G memory (optional)
Size: 2.0 inch TFT display
program. LCD Definition: 320*240 LCD screen
• The computer abnormality sometimes arise out of inserting or pulling BATTERY Built-in lithium battery: 3.7V 1500mAh
SNR ≥90dB
out the cable of the player?
BREAKPOINT PLAY Yes
Fault Cause and Correction: It mainly results from inserting or
AUDIO FORMAT MP3 WMA WAV APE FLAC ACC OGG AIFF DSD64
pulling out the USB during file transfer. Users are recommended not
WAV max-supports 64BIT 192KHz,
to disconnect the transfer process. APE/ FLAC max-supports 24BIT 192KHz,
AUDIO CODE FLOW RATE
• Total memory capacity in the player is different from the actual AIFF max-supports 32BIT 192KHz,
DSD max-supports 1BIT DSD64 3072KHz
capacity
PLAY TIME About 30 hours (Vol 50 screensaver play lossless music)
Cause: it mainly comes from the storage program of the needed
memory space and the shown font library. Therefore, the total BATTERY CHARGING TIME About 2.5 hours (with a charger of 5V and 1000 mA)
memory capacity is smaller than the actual one. VOLUME CONTROL 100-level digital volume control
• Some MP3 songs can’t be played in the player? EARPHONE OUTPUT POWER ≥80mW
Fault Cause and Correction: MP3 refers to the music file compressed OPERATING TEMP. -41°F ~ 104°F
according to MPEG I Layer3 standard. When you encounter MP3 song EARPHONE OUTPUT Stereo output
format incompatible with your player, you can solve it in one of the LINE OUTPUT Vol synchronization, -6DB and 0DB for option
www.PyleUSA.com www.PyleUSA.com