Footing No.
-
1
Footing No.
-
1
Isolated Footing 1
Input Values
Footing Geomtery
Design Type :
Footing Thickness (Ft) :
Slope End Thickness (St) :
Footing Length - X (Fl) :
Footing Width - Z (Fw) :
Eccentricity along X (Oxd) :
Eccentricity along Z (Ozd) :
Column Dimensions
Column Shape :
Column Length - X (Pl) :
Column Width - Z (Pw) :
Pedestal
Include Pedestal?
Pedestal Shape :
Pedestal Height (Ph) :
Pedestal Length - X (Pl) :
Pedestal Width - Z (Pw) :
Design Parameters
Soil Properties
Soil Type :
Unit Weight :
Soil Bearing Capacity :
Soil Bearing Capacity Type:
Soil Surcharge :
Depth of Soil above Footing :
Type of Depth :
Cohesion :
Min Percentage of Slab in Contact:
Coefficient of Friction :
Factor of Safety Against Sliding :
Factor of Safety Against Overturning :
Global Settings
Design Calculations
Load Combinations
Applied Loads
1
2
1
2
------------------------------------------------------
Footing Size
Length (L2) =
Width (W2) =
Area (A2) =
Final Soil Height =
------------------------------------------------------
Pressures at 4 Corners
Load Case
1
1
1
1
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of negative press
Load Case
1
1
1
1
Details of Out-of-Contact Area
(If Any)
Governing load case =
Plan area of footing =
Area not in contact with soil =
% of total area not in contact =
------------------------------------------------------
Stability Check
-
Load Case No.
1
2
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding X Direction
Critical Load Case for Sliding along X-Direction :
Governing Disturbing Force :
Governing Restoring Force :
Minimum Sliding Ratio for the Critical Load Case :
Critical Load Case for Overturning w.r.t. X-Direction :
Governing Overturning Moment :
Governing Resisting Moment :
Minimum Overturning Ratio for the Critical Load Case :
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding Z Direction
Critical Load Case for Sliding along Z-Direction :
Governing Disturbing Force :
Governing Restoring Force :
Minimum Sliding Ratio for the Critical Load Case :
Critical Load Case for Overturning w.r.t. Z-Direction :
Governing Overturning Moment :
Governing Resisting Moment :
Minimum Overturning Ratio for the Critical Load Case :
Critical Load Case And The Governing Factor Of Safety For Sliding Along Resultant Direction
Critical Load Case for Sliding along Resultant Direction :
Governing Disturbing Force :
Governing Restoring Force :
Minimum Sliding Ratio for the Critical Load Case :
------------------------------------------------------
Compression Development Length Check
Development length skipped as column reinforcement is not specified in input (Column Dimension Task Pane)
Top Reinforcement Design Requirement
Top reinforcemnt needs to be provided because of resultant negative pressure coming from net pressure calculations for bendi
Moment Calculation
Pressure at
top left corner
(kN/m2)
7.1615
Pressure at
top left corner
(kN/m2)
7.1615
------------------------------------------------------
Pressure at
top left corner
(kN/m2)
7.1615
Pressure at
top left corner
(kN/m2)
7.1615
Pressure at
top left corner
(kN/m2)
7.1615
Reinforcement Calculation
Along X Axis
Along Z Axis
Footing Reinforcement
Bottom Reinforcement(Mz) Bottom Reinforcement(Mx)
Ø10 @ 190 mm c/c Ø10 @ 190 mm c/c
Calculate Dimension
300.000mm
150.000mm
900.000mm
900.000mm
0.000mm
0.000mm
Rectangular
0.550m
0.500m
No
N/A
N/A
N/A
N/A
25.000kN/m3
20.000N/mm2
500.000N/mm2
Ø10
Ø20
Ø12
Ø20
100.000mm
200.000mm
50.000mm
50.000mm
Cohesive Soil
17.000kN/m3
135.000kN/m2
Gross Bearing Capacity
0.000kN/m2
1200.000mm
Fixed Bottom
10.000kN/m2
0
0.5
1.5
1.5
Axial Shear X
(kN) (kN)
105.926 0
7.161 0
Axial Shear X
(kN) (kN)
105.926 0
7.161 0
0.9 m
0.9 m
2.942 kN
0 kN
Lo X Wo = 0.810m2
P / qmax = 0.893m2
1m
1m
1 m2
1.2 m
Pressure at top left corner Pressure at top right corner
(kN/m2) (kN/m2)
128.2157 128.2157
128.2157 128.2157
128.2157 128.2157
128.2157 128.2157
se, to account for uplift, areas of negative pressure will be set to zero and the pressure will be redistributed to remaining corners.
Pressure at Pressure at
top left corner top right corner
(kN/m2) (kN/m2)
128.2157 128.2157
128.2157 128.2157
128.2157 128.2157
128.2157 128.2157
N/A
1.000sq.m
0.000sq.m
0.00%
N/A
1 sq.m
0 sq.m
0.00%
ng X Direction
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
ng Z Direction
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
nt Direction
N/A
N/A
N/A
N/A
coming from net pressure calculations for bending. Please check 'Always Calculate Top Reinforcement Option' from Global Settings
= #1
0.235
Initial End Depth - 0.085
Col. Width + (Footing Width - Col. Width)/8.0 1
2.681
Pressure at Pressure at
top right corner bottom right corner
(kN/m2) (kN/m2)
7.1615 7.1615
0.456026
2654.517289
146.593074
hence, safe
= #1
0.235
0.085
1
3.31
Pressure at Pressure at
top right corner bottom right corner
(kN/m2) (kN/m2)
7.1615 7.1615
0.456026
2654.517289
146.593074
hence, safe
=#1
0.015m
1.589
6.761197
0.2005
Pressure at Pressure at
top right corner bottom right corner
(kN/m2) (kN/m2)
7.1615 7.1615
326.62
hence, safe
=#0
0.000m
0
0
0
Pressure at Pressure at
top right corner bottom right corner
(kN/m2) (kN/m2)
7.1615 7.1615
0
hence, safe
= #1
44.002
59.915
Pressure at Pressure at
top right corner bottom right corner
(kN/m2) (kN/m2)
7.1615 7.1615
1
1118.034
1118.034
hence, safe
10 mm
0.543
0.175
hence, unsafe for straight bars
10 mm
0.543
0.2
hence, unsafe for straight bars
= #1
360 mm2
360 mm2
471.251 mm2
Steel area is accepted
Err:501
= 100.000mm
= 194.167mm
The reinforcement is accepted.
= #1
360 mm2
360 mm2
471.251 mm2
Steel area is accepted
Err:501
= 100.000mm
= 194.167mm
The reinforcement is accepted.
Pedestal Reinforcement
Top Reinforcement(Mz) Top Reinforcement(Mx) Main Steel
N/A N/A N/A
Shear Z Moment X Moment Z
(kN) (kNm) (kNm)
0 0 0
0 0 0
maining corners.
Pressure at Pressure at
bottom right corner bottom left corner
(kN/m2) (kN/m2)
128.2157 128.2157
128.2157 128.2157
128.2157 128.2157
128.2157 128.2157
m Global Settings
m
m
m
kNm
Pressure at
bottom left corner
(kN/m2)
7.1615
kN/m2
kNm
m
m
m
kNm
Pressure at
bottom left corner
(kN/m2)
7.1615
kN/m2
kNm
kN
kN/m2
Pressure at
bottom left corner
(kN/m2)
7.1615
kN/m2
kN
kN/m2
Pressure at
bottom left corner
(kN/m2)
7.1615
kN/m2
kN
kN/m2
Pressure at
bottom left corner
(kN/m2)
7.1615
kN/m2
kN/m2
m
m
m
m
Trans Steel
N/A
W.R.T. Z-Direction Required FOS
N/A 1.5
N/A 1.5