MO Object Class PMTNL / SCTP / GTPU / LNMME control moved to e-Node-B Commissioning Template
Parameter changes in LNHOIF Object for future use (LTE 2600 band)
LNBTS: qciTab1...9 - dscp parameter control control moved to e-Node-B Commissioning Template
1) LNCEL - drxProfile4:drxInactivityT value updated from 200(200) to 500 (500)
2) LNCEL - mobStateParamTEval value updated from - to 30s (0)
3) LNCEL - mobStateParamNCelChgHgh value updated from - to 8 (8)
4) LNCEL - mobStateParamTHystNorm value updated from - to 30s (0)
5) LNCEL - mobStateParamNCelChgMed value updated from - to 8 (8)
If txPathFailureMode is configured to
'keepCellInService' the cell will be kept in service in
following configurations for a TX path failure:
- dlMimoMode is configured to: "TXDiv", "4-way TXDiv",
"Static Open Loop MIMO", "Dynamic Open Loop
MIMO", "Closed Loop Mimo", "Closed Loop MIMO
(4x2)" and
- for FSMr2 and FSMr3: syncSigTxMode is configured
to "TxDix" and at least one TX path is still operable
while actOtdoa is set to "false" or (actOtdoa is set to
"true" and actPrsTxDiv set to "true")
or
- for FSMr3: syncSigTxMode equals "SingleTx" and
the TX path which transmits the synchronization signal
(PSS/SSS) is operable
The global cell identity a related neighbor cell LNREL must be different to the cell global identity of the pare
9 LNREL cell global identity (ecgiAdjEnbId + ecgiLcrId + ecgiPlmnId) must be different from the LNCEL glob
8 It is sufficient that one of the elements is different.
50000 The
The global
global cell
cell identity
idendityaofrelated neighbor
all adjacent LTEcell
cellLNREL
LNADJL must bebe
must different to the
diffewrent cell global
to the global LNCEL
identity identity
of the pare
, i.
No Default The
LNRELactual
global cellrange
LNADJL IDdepends
global on the+MNClength:
identity (ecgiAdjEnbId
(ecgiAdjEnbId + ifecgiPlmnId)
length=2,
+ ecgiLcrId
ecgiLcrid then
mustrange
+ ecgiPlmnId)
bemustis 00..99, if length=3,
be different
different to global from then
the
LNCEL rangeglob
LNCEL
identity is 0
(lnBt
20 Determines
-The length of MNC.
The global
global cell
cell identity
idendityaofrelated neighbor
all adjacent LTEcell
cellLNREL
LNADJL must bebe
must different to the
diffewrent cell global
to the global LNCEL
identity identity
of the pare
, i.
234 LNREL
global
The cellcell
LNADJL
global global identity
identity (ecgiAdjEnbId
ID (ecgiAdjEnbId
a related neighbor+cell
ecgiLcrId
+ ecgiLcrid +LNREL +must
ecgiPlmnId)
ecgiPlmnId) must
be bemust tobe
thedifferent
different
different to global
cell from the LNCEL
LNCEL
global of theglob
identity
identity (lnBt
pare
24 h LNREL cell global identity (ecgiAdjEnbId + ecgiLcrId + ecgiPlmnId) must be different from the LNCEL glob
The global cell idendity of all adjacent LTE cell LNADJL must be diffewrent to the global LNCEL identity , i.
15 global LNADJL
The global ID (ecgiAdjEnbId
cell idendity + ecgiLcrid
of all adjacent + ecgiPlmnId)
LTE cell LNADJL must must be different
be diffewrent to to global
the globalLNCEL
LNCEL identity (lnBt
identity , i.
2 global LNADJL ID (ecgiAdjEnbId + ecgiLcrid + ecgiPlmnId) must be different to global LNCEL identity (lnBt
spid (1)
3
true (1)
No Default
0 (false)
0 (false)
8kbps (1)
No Default The pci value must be unique for all
list
No Default If one ofhaving
entries the listidentical
parameter: enbId, mcc, mnc or mncLength in one pciIpAdrMap is configured, all the other
dlEarfcn
No Default configured.
If one of the list parameter: enbId, mcc, mnc or mncLength in one pciIpAdrMap is configured, all the other
No Default If one of the list parameter: enbId, mcc, mnc or mncLength in one pciIpAdrMap is configured, all the other
If one of the list parameter: enbId, mcc,if mnc or mncLength
then in one is
pciIpAdrMap is configured,then
all the other
No Default Actual range depends on mncLength: mncLength=2 range 00...99, if mncLength=3 range 00
No Default The value of mncLength determines whether the mnc is of 2 digits or 3 digits length.
No Default The pci value must be unique for all
list
1 no relations
entries having identical dlEarfcn
3 configured.
no relations
infinity (4) no relations
101
4
7bit (0)
100ms (0)
102
7bit (0)
150ms (1)
103 -
12bit (1) -
100ms (1) -
104 -
12bit (1) -
500ms (1) -
2
3
750ms (2)
3
3
750ms (2)
4
3
750ms (2)
5
3
750ms (2)
low prio S1 (3)
10s (10)
false (0) The parameter
prohibitPsHOtoWcdma
The parameter pwsWithEmAreaId must be is
false (0) configured
mandatory if actHOtoWcdma is set to
80ms (3) 'true',
requiredit isif at least one of the
2 (2) meaningless
parameters actETWS otherwise.
If actSrvccToWcdma is set to 'true'
Refer eNode-B commi Templateor actCMAS is set to 'true'.
prohibitPsHOtoWcdma must
If pwsWithEmAreaId is set to be set to
'true',
0 (false) 'false'.
emAreaId is
1 mandatory required.
31 -
31 -
101
2
1
ENABLED (1)
GBR (0)
RLC_UM (1)
101
100ms (1)
5
80ms (3) -
2 (2)
Refer eNode-B commi Template
0 (false)
16
35
2 (2)
144 -
144 -
102
4
2
ENABLE (1)
GBR (0)
RLC_UM (1)
102
100ms (1)
7
80ms (3) -
2 (2)
Refer eNode-B commi Template
0 (false)
16 -
35 -
2 (2)
128 -
64 -
103
3
3
ENABLE (1)
GBR (0)
RLC_UM (1)
103
100ms (1)
6
300ms (13) -
2 (2)
Refer eNode-B commi Template
0 (false)
16 -
35 -
2 (2)
320 -
32 -
2
5
4
ENABLE (1)
GBR (0)
RLC_AM (0)
2
300ms (3)
8
3 (3)
Refer eNode-B commi Template
0 (false)
3 (3) if schedulType is set to 'NON-GBR',
lcgid
1 must be equal or greater than '2';
1 otherwise
5 must be '0'
ENABLE (1)
nonGBR (1)
RLC_AM (0)
1
100ms (1)
11 if schedulType is set to 'NON-GBR', schedulPrio must be equal or greaterer than '9'
NON-GBR (1) if actConvVoice is set to 'false',
schedul-
5 Type must be set to 'NON-GBR'
3 (3) if schedulType is set to 'NONGBR',
schedulPrio must be equal or
Refer eNode-B commi Template
greater than '9'
0 (false)
3 (3)
2
6
6
ENABLE (1)
nonGBR (1)
RLC_AM (0)
2
300ms (3)
11
5
3 (3)
Refer eNode-B commi Template
0 (false)
3 (3)
1
7
7
ENABLE (1)
nonGBR (1)
RLC_AM (0)
2
100ms (1)
11
5
4 (4)
Refer eNode-B commi Template
0 (false)
3 (3)
2
8
8
ENABLE (1)
nonGBR (1)
RLC_AM (0)
2
300ms (3)
11
5
3 (3)
Refer eNode-B commi Template
0 (false)
3 (3)
2
9
9
ENABLE (1) If actNonGbrServiceDiff is set to 'false', qciSupp need to be set to 'ENABLED'
nonGBR (1)
RLC_AM (0)
2
300ms (3)
11
5
No Default
No Default
No Default
0 (false)
No Default
No Default
No Default
ENABLE (1)
nonGBR (1)
RLC_AM (0)
No Default
No Default
No Default
No Default
0 -
-
infinity (7)
1
120ms (23)
50ms (10)
50ms (10)
101
5bit (0)
5bit (0)
50ms (10)
102
5bit (0)
5bit (0)
50ms (10)
103 -
10bit (1) -
10bit (1) -
50ms (10) -
104 -
10bit (1) -
5bit (0) -
50ms (10) -
64 (4)
2
120ms (23)
50ms (10)
50ms (10)
64 (4)
3
120ms (23)
50ms (10)
50ms (10)
64 (4)
4
120ms (23)
50ms (10)
50ms (10)
64 (4)
5
120ms (23)
50ms (10)
50ms (10)
900 s
2s (2)
nonGBRBufferBased (0)
128 (6)
conservative (0)
6 The value of shutdownWindow divided
60 The value of shutdownWindow divided
No Default
No Default
150 minute
150 minute
5s
1000 ms -
500 ms
500 ms
10 ms
10 ms
100 ms -
0 (false)
keepCellInService (0)
Related features Change Control
a1TimeToTriggerDeactInterMeas
a2TimeToTriggerActGERANMeas
a2TimeToTriggerActInterFreqMeas
a2TimeToTriggerActWcdmaMeas
a2TimeToTriggerRedirect
a3Offset
a3ReportInterval
a3TimeToTrigger
a5ReportInterval
a5TimeToTrigger
acBarCsfbOc - acBarAC
acBarCsfbOc - acBarTime
acBarCsfbOc - probFac
acBarMMTelVideoOc - acBarAC
acBarMMTelVideoOc - acBarTime
acBarMMTelVideoOc - probFac
acBarMMTelVoiceOc - acBarAC
acBarMMTelVoiceOc - acBarTime
acBarMMTelVoiceOc - probFac
acBarOc - ocAcBarAC
acBarOc - ocAcBarTime
acBarOc - ocAcProbFac
acBarSig - sigAcBarAC
acBarSig - sigAcBarTime
acBarSig - sigAcProbFac
actDlsOldtc
actDlsVoicePacketAgg
actDrx
actFastMimoSwitch
actLdPdcch
actModulationSchemeUL
actOlLaPdcch
actOtdoa
actPrsTxDiv
actRepeaterMode
actSmartDrx
actSuperCell
actTtiBundling
actUlLnkAdp
addAUeRrHo
addAUeTcHo
addEmergencySessions
addGbrTrafficRrHo
addGbrTrafficTcHo
addNumDrbRadioReasHo
addNumDrbTimeCriticalHo
addNumQci1DrbRadioReasHo
addNumQci1DrbTimeCriticalHo
addSpectrEmi
administrativeState
anrUtraRscpThres
applyOutOfSyncState
blacklistHoL - blacklistTopo
blacklistHoL - freqEutra
blacklistHoL - phyCellIdRange
blacklistHoL - phyCellIdStart
blankedPucch
celResTiF - celResTiFHM
celResTiF - celResTiFMM
cellBarred
cellCapClass
cellIndOffServ
cellName
cellReSelPrio
cellResetRequest
cellSelectionInfoV920 - qQualMinOffsetR9
cellSelectionInfoV920 - qQualMinR9
cellSrPeriod
cellType
cqiAperEnable
cqiAperMode
cqiPerNp
cqiPerSbCycK
cqiPerSimulAck
dFListPucch - dFpucchF1
dFListPucch - dFpucchF1b
dFListPucch - dFpucchF2
dFListPucch - dFpucchF2a
dFListPucch - dFpucchF2b
dSrTransMax
defPagCyc
deltaMargin
deltaPreMsg3
deltaPucchShift
deltaTfEnabled
dl64QamEnable
dlCellPwrRed
dlChBw
dlInterferenceEnable
dlInterferenceLevel
dlInterferenceModulation
dlMimoMode
dlOlqcEnable
dlPathlossChg
dlPcfichBoost
dlPhichBoost
dlRsBoost
dlTargetBler
dlamcCqiDef
dlamcEnable
dlpcMimoComp
dlsDciCch
dlsFdAlg
dlsOldtcTarget
dlsUsePartPrb
drxApplyDeviceType
drxProfile1 - drxProfileIndex
drxProfile1 - drxProfilePriority
drxProfile101 - drxInactivityT
drxProfile101 - drxLongCycle
drxProfile101 - drxOnDuratT
drxProfile101 - drxProfileIndex
drxProfile101 - drxProfilePriority
drxProfile101 - drxRetransT
drxProfile102 - drxInactivityT
drxProfile102 - drxLongCycle
drxProfile102 - drxOnDuratT
drxProfile102 - drxProfileIndex
drxProfile102 - drxProfilePriority
drxProfile102 - drxRetransT
drxProfile2 - drxInactivityT
drxProfile2 - drxLongCycle
drxProfile2 - drxOnDuratT
drxProfile2 - drxProfileIndex
drxProfile2 - drxProfilePriority
drxProfile2 - drxRetransT
drxProfile3 - drxInactivityT
drxProfile3 - drxLongCycle
drxProfile3 - drxOnDuratT
drxProfile3 - drxProfileIndex
drxProfile3 - drxProfilePriority
drxProfile3 - drxRetransT
drxProfile4 - drxInactivityT
drxProfile4 - drxLongCycle
drxProfile4 - drxOnDuratT
drxProfile4 - drxProfileIndex
drxProfile4 - drxProfilePriority
drxProfile4 - drxRetransT
drxProfile5 - drxInactivityT
drxProfile5 - drxLongCycle
drxProfile5 - drxOnDuratT
drxProfile5 - drxProfileIndex
drxProfile5 - drxProfilePriority
drxProfile5 - drxRetransT
drxSmartProfile2 - drxInactivityT
drxSmartProfile2 - drxLongCycle
drxSmartProfile2 - drxOnDuratT
drxSmartProfile2 - drxProfileIndex
drxSmartProfile2 - drxProfilePriority
drxSmartProfile2 - drxRetransT
drxSmartProfile2 - drxShortCycle
drxSmartProfile2 - drxShortCycleT
drxSmartProfile2 - smartStInactFactor
drxSmartProfile3 - drxInactivityT
drxSmartProfile3 - drxLongCycle
drxSmartProfile3 - drxOnDuratT
drxSmartProfile3 - drxProfileIndex
drxSmartProfile3 - drxProfilePriority
drxSmartProfile3 - drxRetransT
drxSmartProfile3 - drxShortCycle
drxSmartProfile3 - drxShortCycleT
drxSmartProfile3 - smartStInactFactor
drxSmartProfile4 - drxInactivityT
drxSmartProfile4 - drxLongCycle
drxSmartProfile4 - drxOnDuratT
drxSmartProfile4 - drxProfileIndex
drxSmartProfile4 - drxProfilePriority
drxSmartProfile4 - drxRetransT
drxSmartProfile4 - drxShortCycle
drxSmartProfile4 - drxShortCycleT
drxSmartProfile4 - smartStInactFactor
drxSmartProfile5 - drxInactivityT
drxSmartProfile5 - drxLongCycle
drxSmartProfile5 - drxOnDuratT
drxSmartProfile5 - drxProfileIndex
drxSmartProfile5 - drxProfilePriority
drxSmartProfile5 - drxRetransT
drxSmartProfile5 - drxShortCycle
drxSmartProfile5 - drxShortCycleT
drxSmartProfile5 - smartStInactFactor
eCallAcBarred
eUlLaAtbPeriod
eUlLaBlerAveWin
eUlLaDeltaMcs
eUlLaLowMcsThr
eUlLaLowPrbThr
eUlLaPrbIncDecFactor
earfcnDL
earfcnUL
emAreaId
enableAmcPdcch
enableBetterCellHo
enableCovHo
enableDl16Qam
enableLowAgg
enablePcPdcch
eutraCelId
filterCenterTx
filterCoeff
filterCoefficientCSFBCpichEcn0
filterCoefficientCSFBCpichRscp
filterCoefficientCpichEcn0
filterCoefficientCpichRscp
filterCoefficientRSRP
filterCoefficientRSRQ
filterCoefficientRSSI
furtherPlmnIdL - cellReserve
furtherPlmnIdL - mcc
furtherPlmnIdL - mnc
furtherPlmnIdL - mncLength
gbrCongHandling
grpAssigPUSCH
harqMaxMsg3
harqMaxTrDl
harqMaxTrUl
harqMaxTrUlTtiBundling
hopModePusch
hsScenario
hysA3Offset
hysThreshold2GERAN
hysThreshold2InterFreq
hysThreshold2Wcdma
hysThreshold2a
hysThreshold3
hysThreshold4
iFLBLoadThresholds - iFLBBearCheckTimer
iFLBLoadThresholds - iFLBHighLoadGBRDL
iFLBLoadThresholds - iFLBHighLoadNonGBRDL
iFLBLoadThresholds - iFLBHighLoadPdcch
iFLBLoadThresholds - iFLBNomNumPrb
iFLBLoadThresholds - iFLBTargetLoadGBRDL
iFLBLoadThresholds - iFLBTargetLoadNonGBRDL
iFLBLoadThresholds - iFLBTargetLoadPdcch
idleLBCellReSelPrio
idleLBPercentageOfUes
ilReacTimerUl
inactivityTimer
iniMcsDl
iniMcsUl
iniPrbsUl
intrFrqCelRes
intraPresAntP
lcrId
lnCelId
loadBalancingProfile
lowerMarginCIO
maxBitrateDl
maxBitrateUl
maxCrPgDl
maxCrRa4Dl
maxCrRaDl
maxCrSibDl
maxGbrTrafficLimit
maxNrSymPdcch
maxNumActDrb
maxNumActUE
maxNumCaConfUeDc
maxNumQci1Drb
maxNumRrc
maxNumRrcEmergency
maxNumUeDl
maxNumUeUl
mbrSelector
measQuantityCSFBUtra
measQuantityUtra
mimoClCqiThD
mimoClCqiThU
mimoClRiThD
mimoClRiThU
mimoOlCqiThD
mimoOlCqiThU
mimoOlRiThD
mimoOlRiThU
minBitrateDl
minBitrateUl
moPrMappingList - moPrId
moPrMappingList - spid
moPrMappingList - spidLast
mobStateParamNCelChgHgh
mobStateParamNCelChgMed
mobStateParamTEval
mobStateParamTHystNorm
modPeriodCoeff
n1PucchAn
n310
n311
nCqiRb
offsetFreqIntra
operationalState
p0NomPucch
p0NomPusch
pMax
pMaxIntraF
pMaxOwnCell
pagingNb
pdcchAggDefUe
pdcchAggMsg4
pdcchAggPaging
pdcchAggPreamb
pdcchAggRaresp
pdcchAggSib
pdcchAlpha
pdcchCqiShift
pdcchHarqTargetBler
pdcchUlDlBal
periodicCqiFeedbackType
periodicUeMeas - activateMeas
periodicUeMeas - measurementType
periodicUeMeas - reportAmount
periodicUeMeas - reportInterval
phichDur
phichRes
phyCellId
prachCS
prachConfIndex
prachFreqOffset
prachHsFlag
prachPwrRamp
preambTxMax
primPlmnCellres
prsBandwidth
prsConfigurationIndex
prsMuting - prsMutingInfo
prsMuting - prsMutingInfoPatternLen
prsNumDlFrames
prsPowerBoost
pucchNAnCs
puschAckOffI
puschCqiOffI
puschRiOffI
qHyst
qQualMinR9
qRxLevMinOffset
qrxlevmin
qrxlevminintraF
raContResoT
raLargeMcsUl
raMsgPoffGrB
raNondedPreamb
raPreGrASize
raRespWinSize
raSmallMcsUl
raSmallVolUl
rcAmbrMgnDl
rcAmbrMgnUl
rcEnableDl
rcEnableUl
redBwEnDl
redBwMaxRbDl
redBwMaxRbUl
redBwMinRbUl
redBwRpaEnUl
riEnable
riPerM
riPerOffset
rootSeqIndex
rsrqRedirectParams - a2TimeToTriggerRedirectRsrq
rsrqRedirectParams - hysThreshold4Rsrq
rsrqRedirectParams - threshold4Rsrq
sIntraSearchV920 - sIntraSearchPR9
sIntraSearchV920 - sIntraSearchQR9
sIntrasearch
sNonIntraSearchV920 - sNonIntraSearchPR9
sNonIntraSearchV920 - sNonIntraSearchQR9
sNonIntrsearch
siWindowLen
sib2Scheduling - siMessagePeriodicity
sib2Scheduling - siMessageRepetition
sib2Scheduling - siMessageSibType
sib3Scheduling - siMessagePeriodicity
sib3Scheduling - siMessageRepetition
sib3Scheduling - siMessageSibType
sibSchedulingList - siMessagePeriodicity
sibSchedulingList - siMessageRepetition
sibSchedulingList - siMessageSibType
spStResPars - nCellChgHigh
spStResPars - nCellChgMed
spStResPars - qHystSfHigh
spStResPars - qHystSfMed
spStResPars - tEvaluation
spStResPars - tHystNormal
srbSchedWeightDl
srbSchedWeightUl
srsConfiguration
srsPwrOffset
stInactFactor
syncSigTxMode
t300
t301
t302
t304InterRAT
t304InterRATGsm
t304IntraLte
t304eNaccGsm
t310
t311
t320
tExtendedWait
tPeriodicBsr
tPeriodicPhr
tProhibitPhr
tReTxBsrTime
tReselEutr
tStoreUeCntxt
taMaxOffset
taTimer
taTimerMargin
tac
threshServingLowQR9
threshSrvLow
threshold1
threshold2GERAN
threshold2InterFreq
threshold2Wcdma
threshold2a
threshold3
threshold3a
threshold4
timeToTriggerSfHigh
timeToTriggerSfMedium
ttiBundlingBlerTarget
ttiBundlingBlerThreshold
ttiBundlingSinrThreshold
ulChBw
ulCombinationMode
ulRsCs
ulTargetBler
ulamcAllTbEn
ulamcSwitchPer
ulatbEventPer
ulpcAlpha
ulpcEnable
ulpcIniPrePwr
ulpcLowlevCch
ulpcLowlevSch
ulpcLowqualCch
ulpcLowqualSch
ulpcPucchEn
ulpcPuschEn
ulpcRarespTpc
ulpcReadPeriod
ulpcSrsEn
ulpcUplevCch
ulpcUplevSch
ulpcUpqualCch
ulpcUpqualSch
ulsFdPrbAssignAlg
ulsMaxPacketAgg
ulsMinRbPerUe
ulsMinTbs
ulsSchedMethod
upperMarginCIO
useId
Full Name Description
Time to trigger for A1 to deactivate inter measurement Time to trigger deactivation of all measurements
Time to trigger for A2 to activate GERAN measurement Duration
Time to trigger for which the event
activation A1 must measurements
of GERAN be valid, such
that
DurationInter-Frequency/Inter-RAT
for measurements are
Time to trigger for A2 to activate inter measurement Duration
deactivated for which the event A2 must be
which the event A2 must be valid,
valid, such such
that
that GSM measurements are activated
Time to trigger for A2 to activate WCDMA measurement Timeadditional
to trigger InterFrequency
activation of WCDMA measurements are
activated
measuremenrts
Time to trigger for A2 to start redirect procedure Duration for which the event A2 must be valid, such
Duration
that redirect for which is raised the event A2 must be valid, such
A3 offset Handover
that WCDMA margin for better cell
measurements areHO. Used in
activated
A3 report interval measurement
This parameterevent defines type the A3interval
where with the event whichis
triggered
measurement when the neighbor cell becomes better
A3 time to trigger Time
than the whichreports
for serving thecellspecific
are repeatedly
bythe criteria
value offor
themeasurement the
sent
the A3
as long as
offset.
the specific
measurement criteria
event forA3 must be met in event
order toA3
A5 report interval Defines
are met. the
Value interval
definitions with which as measurement
stated in 3GPP
trigger
reports aaremeasurement
repeatedly report.
sent as Value
longfor as definitions
the specific as
A5 time to trigger TS36.331:
Time
stated forin which
3GPP value the MS120
specific
TS36.331: corresponds
criteria
value MS0 to
the 120
corresponds ms,
criteria
MS240
measurement for
toMS40 the
240 event measurement
ms and A5 somust on,so event
while
be met A5
value are
in order met.
MIN1 to
Access class barring list to 0 ms,
Access classto toas
barring 40 ms
list and
(5 in bit) on.
Value
corresponds
trigger definitions
a measurement 1 min, statedMIN6
report. 6formin
to3GPP
Value
originating
TS36.331:
and so on.
definitions
calls.
value
as
Access class barring time Access
MS120
Defines class
corresponds
the barringclass
access list120
to (5 bit)
ms,for
barring MS240originating
time. to 240calls ms
stated
for AC in
11-15 3GPP TS36.331:
(leftmost bit is value
for MS0
AC 11, the corresponds
Access probability factor
and
The
to so
access
0 ms,
Defines
on,MS40 while
class tovaluebarring
40 ms MIN1andtime corresponds
so defines
on. the second
to
time 1 min,thatbit
in
MIN6
the the listthe
to
access 6ismin probability
for
barring AC
and 12,
so
check
for
and
on. asoUE
remains
to establish
on...). unsuccessful
an RRC
connection.
The default
Access class barring list Access
while
The theclass
access UEis isno
barring
not
probability
access list (5
performing class
factor
bit) anbarred.
for emergency
defines
originating calls.
the probability call. In
Access class barring time Access
this
Defines case, class
the the barring
UE
access class starts list (5
timer bit)
barring for
T303 originating
time.using this calls
for
for a
AC UE to
11-15Timer establish
(leftmost an RRC
bitinis connection.
for defines
AC 11, the
Access probability factor
parameter.
The
The
Defines access
UE draws
the class value
barring
a random
probability
minutes.
time
fornumber
asoUE to(0establish the second
= rand time
<an that
1).RRC If
bit
in
the the list
access is for
barring AC 12,
check and remains on...). unsuccessful
rand is higher
connection.
The default than the value indicated by the
Access class barring list Access
while
access
The the
access UEis
class
probability
no
barring
is not
probability
access list (5
performing
factor,
class
the
factor
bit)UE
barred.
forconsiders
an
defines
originating
emergency
the thecalls.
probabilitycall. In
Access class barring time Access
this
access
Defines case, class
barring
the the barring
UE
access checkstarts list
class to (5
timer
be bit) fortime.
T303
unsuccessful.
barring originating
using this calls
for
for a UE
AC 11-15to establish(leftmost anbitRRC forconnection.
parameter.
The access
UE draws Timer
class value
barring
a random inis minutes.
time AC 11, the
defines the second
time that bit
Access probability factor Defines
in the list theis probability
for AC 12, fornumber
and asoUE to(0establish
on...). = rand <an 1).RRC If
the
rand access
is higher
connection. barring than check
the value remains indicated unsuccessful
by the
Access class barring list for mobile originating calls The
Access default UEis
class no
barring access list (5 class bit) barred.
forconsiders
originating
while
access
The the
access probability is not
probability performing
factor, the
factor UE an
defines emergency
the thecalls
probabilitycall. In
Access class barring time for originating calls for
this
access
The ACcase,
access11-15
barringthe (leftmost
UE
class checkstarts
barring bit is
timer
to RRCbe time for defines the time thatbit
AC
T303
unsuccessful. 11,
using the second
this
for
in a
the UE to
list is Timer establish
for ACvalue 12, an and connection.
so on...).
parameter.
the
The access
UE draws barring a random check innumber
minutes.
remains (0unsuccessful
=therand < 1). If
Access probability factor for originating calls The
The access
default probability
is no access factor
class defines
barred. probability
while
rand
for a the
is
UE toUE
higher is not
than
establish performing
the an value
RRC an
indicated emergency
connection. by the call. In
Access class barring list mobile orig signaling Access
this
access case, class the barring
probability UE starts
factor,listtimer(5
the bit) forconsiders
T303
UE signaling
using this for AC
the
The
11-15 UE draws
(leftmost abitrandom
is for AC number the(0second
11,defines = rand <
bit 1). If
inthat
the
Access class barring time for signaling parameter.
access
The
rand access
is barring
higher Timer
class check
than value
barring
the to inbe
value minutes.
timeunsuccessful.
indicated the
by time
the
list
the is for ACbarring 12, andcheck so on...).
Access probability factor for signaling Theaccess
access
The access
default probability probability
is no factor,
access factorremains
the
class UE
defines
barred.
unsuccessful
considers the
the probability
while
access
for a the
UE UE
barring
to is
establish not
checkan performing
to RRC an
be unsuccessful. emergency call. In
connection.
Activate DL OLDTC Switch
this case, to activate/deactivate
the UE starts timer Outer
T303 Loop Delay
using this
The
Target UEControl draws a random
(OLDTC) number
for voice (0
in = rand
downlink < 1). time If
Activate DL voice packet aggregation parameter.
Switch
rand is to
higher Timer
activate/deactivate
than value
the in
value minutes.
voice
indicated packet by the
domain
aggregation scheduling.
Activate DRX access
OLDTCprobability
Parameter toinactivate
algorithm
downlinkfactor,
measures or scheduler.
the an
deactivateUEactualconsiders DRXthe
thescheduling feature
access
in
delaya cell.
of barring
voice check
bearer to
in be and
DL unsuccessful.
compares it to a
Activate fast adaptive MIMO switch Enables "Fast Adaptive MIMO Switching" for Closed
targeted
Loop MIMO delay. modes Then, basedif theon measured
PMI/RI delay issent
reports more
Activate load adaptive PDCCH Activate
than the or
target,deactivate UE priority the load is set adaptive and
increased number in case ofby
UEs
PDCCH if actFastMimoSwitch
symbols in aiscell is to TRUE.
Activate modulation scheme UL the measured
This
Enables parameter "Dynamic delay
switch MIMO below
on/off the differnt
the
Switching" target, if for the
Ul priority
The
is actual
decreased.
modulation OFDM
schemes. symbol amount used PDCCH
Activate outer loop link adaptation actFastMimoSwitch
Activate
in a TTI /
is Deactivate
selected is
from set
Outer to
values FALSE.
loop Link
between Adaptation
the for
When set to "16QAMHighMCS"
actFastMimoSwitch
PDCCH isamount
set to TRUE: MCS21-MCS24
Activation of are
PRS activation minimum
Activates
enabled andreasonable
the the transmission
UL AMC of symbols
of PRS signals
proposes to the for the
according
"Fast
O&M
selected
to the
Adaptive
switch
PRS DL forMIMO
bandwidthactivating
configuration
Switching"
and/ deactivating
maximum anUL
allowed
PRS Tx diversity activation scheduler
"Fast
If adaptive
Tx Diversity
additional to use MIMO the
is enabled higher
Switching" 16-QAM
forAdaptation supports
PRS transmission, MCS, if radio
fast rank
number
conditions of Outer
PDCCH
allow.
Loop symbols Link (maxNrSymPdcch). for PDCCH.
selection
then
This precoding
additional and fast
PDCCH codebook
vector switching
Outer based
Loop will precoding
be
Link used and
Adaptation of
Repeater mode activation Defines
Precondition modefor ofthethefeature
the radio module
is that UE or aRIU
is Cat.1 unit.
data
hence
controls transmission
allthe
actRepeaterMode configured
PDCCH using Tx
parameter closed
linkantennas
adaptation loop
value will feedback
CQI be
'Coupled' used
shift forto
of
such
Activate smart DRX Cat.4
Parameter
precoding device. to activate/deactivate
matrix indicator (PMI) the
in Smart
combination DRX
the
that
needs
Cat.5
feature
transmission
the PDCCH
toinbe
devices, athen used
cell. which
of
and the HARQ
for coupled
would
PRS signal.
Response
mode real
support
If Tx (R typewith
diversity
Target
cells64-QAM BLER
Activate supercell configuration rank
is
is indicator
disabled
achieved
Activates the when (RI).the the
transmission PMI
PRS OLQC and signal
of RI reporting
Target will
duplicated just
BLER bedelays
datais
configuration),
modulation, willvaluebe as 'Dedicated'
well provided for dedicated
withand codecs up
shall be
transmitted
achieved.
streams minimized
via different byRRHs periodic in and
downlink, aperiodic reports
the
Activate TTI bundling mode
Parameter
to MCS24 cells (cell
to
(when have
activate the resources
or deactivate
appropiated only the from
configurationTTI RIUBundlingunit)
of
sent
on by
avalue UEs
single'none'
combination in
antenna order
of uplink to
(the optimize
signalsphysical PMI
receivedantenna closed
from loop
different
and
feature for all other cells (cell's have not
Activate uplink link adaptation this
gains inincombination
parameter
corresponding
Activates
RRHs.
a cell.
Uplink isLink
given); with however
Adaptation optimized andthe rankassumption
defines Link is
selection.
resources
that Cat.5 from
UEs RIU
acts unit).
as Cat.1 to Cat.4 devices andin
Additional active UE with reason radio reason handover to
The antenna
Adaptation
Possible
Defines super modes
the port
mode
cell {0}).
configurations
additional are 'none', number can
'Dedicated' just be
ofbecause
active applied
and
UEs, which
utilize16-QAMmodulation
actFastMimoSwitch
When set to "off" no is set
Uplink in
to UL.
FALSE:
link Adaptation Activationof the
function of
10 MHz
'Coupled'.
are allowed cell to bandwidth
access a configurations,
cell viaofhandover thatwith is HO
Additional active UE with reason time critical handover setting
Defines
"Dynamic
is active to the
at 'false'
MIMO additional
all. enable64qamPusch"
Switching" number active parameter
UEs,are which
LNCEL
The
cause: 'Coupled'"dlChBw"
"HO desirable is and
supported "ulChBw"
for radioonly parameters
with Configuration
reasons", when RRC
(broadcasted
are allowed
"Dynamic
When set to MIMO to in
"eUlLa" SIB2).
access
Switching" a cell via handover
supports RIUolink
andwith CQI HO
Add emergency sessions configured
Additional
Type
connection R. to
margin 10
(maxNumRrc) for the
MHz. new
Emergency extended
or active Sessions;
UERRC Link
cause:
based
Adaptation
Super
this "Time
rank
cellismargin
margin critical
selection
function
configurations
increases handover",
after
is the filtering
activated.
are not
thresholds when of
released CQI
for activeand RI
in or UEs,
Add GBR-DRB traffic for radio reason handover The
MCS RIU
(maxNumActUE)
Additional
connection (MCS21-MCS24) able
(maxNumRrc)tolimit
work
on the either
already
forthreshold
or UL in
AMC
active 'Dedicated'
reached. UE may be used
reports
The other
conjunction
active sent
DRBs choicesby
with
with the
RFa UE.
allowsharing
factor "Dynamic
to andconfigure
and MIMO
Repeater
active the Switching"
old
QCI1-DRBs UL
Interface Link
in
'Coupled'
"maxGbrTrafficLimit"
only when
(maxNumActUE) mode
this also
parameter
limit in
in case
case
already is a
of
set RF unit
handover
to
reached. is chained via
Add GBR-DRB traffic for time critical reason handover is using
Adaptation
Additional
Units.
the cell RI and
functions
margin CQI on thresholds
as
the it was
threshold upfor torankRL20 selection
so by by
it.
for radio
"16QAMHighMCS". reasons.
comparison
"slowAMC"
"maxGbrTrafficLimit
Emergency with old
only
traffic filtered
shallSlowAMC
" the
inhave values.
case aofis The
high threshold
activated,
preference by
Add number drb radioReasHo Additional
The
With amount margin
the coonfiguration of radio for resources maximum
"16QAM" onlynumber the of active
codec up
parameters
"slowAmcOlla"
handover
against normalfor "mimoClCqiThD",
time the SlowAMC
critical
traffic in thereasons.
cell."mimoClCqiThU",
and EDG and FUG
Add number drb timeCriticalHo DRBs
(PRBs)
to MCS20
Additional in isthe are
margincell
calculated accessing
enable.for in
the % of the
maximumthe cell via
available
number HO with
of HO-
active
"mimoClRiThD",
are
The
The active,
amount by
addEmergencySession of "mimoClRiThU"
"slowAmcATB"
radio resources only
value areold activated
SlowAMC
is usedThis to and
and
cause:
PRBs in"HO
depending desirable onare the for radio reasons".
Add number QCI1 DRB for radioReasHo
"QPSK"
DRBs
used
SlowATB
(PRBs)
increase
Additional
margin
for isconfiguration
is
the
rank
functionscell
calculated
several
margin
added
accessing
switching.
to forthe in
thresholds;
the %system.
allows
active ofthe
maximum
threshold
utilization
the iscell
itand via
finally
available
worth number
maxNumActDrb.
only
HO bywith
noting
up to
ofthat HO-
active
For
MCS10
cause: 5 MHz"Time systemCritical 25 PRBs*,
HO". This margin is
"slowAmcOllaATB"
PRBs
the
GBRs
Hand
for system
10
depending
in thetraffic
over
MHz limits
system
on allthe
are50never
cell accessing
shall the
have
PRBs*,
3
system. old
exceeded
the
some functionviafor
cellpreference handall overto
added
are active
the
For threshold
together
5
resources.
with MHz
HO-cause: as up
systemmaxNumActDrb.
to "HORL20
25 PRBs*,
desirable for radio reasons".
against
for
Hand 15 MHz
over newsystem upcoming 75 trafficsome
PRBs*, in thepreference
cell.
for
This MHztraffic
10margin system
is added shall50tohave PRBs*,
the threasold
for 20
against
for Mhz new system
upcoming 100 PRBs*
traffic in are
the cell.
The15
The MHz system
maximum
maxNumQci1Drb.
maximum
available. additional
additional75 PRBs*, margin
margin depends depends on on the the
for
Hand 20
bandwidth
bandwidth Mhz
over system
of the
traffic
of the 100
cell.
shall
cell. The PRBs*
have
The following
some
following are values
preference
values are
are
*available.
Thereduced
maximum by common additional resources
margin like
depends on the
allowed:
against
allowed:
PUCCH, new upcoming trafficSIBs in the cell.
reducedRACCH,
*bandwidth byof common
the cell. PDCCH, The following
resources etc.
like values are
which
allowed:
PUCCH, canRACCH, consume some PRBs
PDCCH, (e.g.
etc. 3 on the
SIBs depends
5
5 MHz
TheMHzmaximumbandwidth
bandwidth 0
0 ..
additional .. 480
2400 margin
Add number QCI1 DRB for timeCriticalHo Additional margin for the maximum number of active
Additional spectrum emission mask GBRs
The additional in the cell accessing
spectrum the cellmask
emission via hand over
parameter
with
is HO-cause:
broadcast into "Time
a cell Critical
to indicate HO". This margin is
Administrative state Administrative
added to the an state
threshold of the cell, thethat
maxNumQci1Drb. value theisUE set by
should
the meet
operator. additional requirement.
ANR UTRA RSCP threshold Hand
It defines overthe trafficminimum shall have power some levelpreferencethat a UE should
against
report newaupcoming
from measured traffic
UTRA incellthe for cell. considering
Apply UL out-of-sync state Determines which UEs shall be actively sent to UL
the corresponding
out-of-sync state PCI, respectively
provided that bearer PSC, as a
combination
Blacklisted topologies The
This
possible maximum
parameterUTRA additional
is
neighborintroduced margin
cell to depends
allow
candidate. on the
(Mapping
and
bandwidth appliedof
blacklisting DRXthe profile
cell. The allows
following forother this.
values are
eUTRA carrier frequency between
This parameter
extendedDrxOnly: thefor UE X2-Handover
measured
must only be UEs RSCP
configured only
being and for
configured the SFS
an inter- with
allowed:
HO
values
frequencyvariants
is according
cell. are It still
will allowed
to be 3GPPtaken TS as 25.133/25.123)
an
Range of physical cell id range extended
Indicates
If settings
the
set to "all" thecell number for
respective the
of long
PCIs entry DRX
in the cycle
range (including
intra-frequency
allDrx:
startPCI). all UEs
If Parameterbeing if configured
this parameter
rangePCI forisof is set
DRX
only to PCI
provided
one,
Start of physical cell id range 5
in MHz
Indicates
ownCarrierFreq bandwidth
blacklistHoL the is valid
lowest 0 PCI.. 150for in allthe kindsrange
that
(startPCI)applied
10 MHz bandwidth
Handover is DRX
specified.
Topology.0If..set profile allows
200to "onlyX2",
Blanked PUCCH resources allUEs:
15 MHzall
Defines
handover the UEs
bandwidth
to theindependently
pointer 0to..PRB
respective 200 entry from of where
DRX configuration
in blacklistHoL the CQI-
provided
allocation
20 MHz
shall that
starts
onlybandwidth bearer
be excluded to leave combination
0timer .. as
200 some
targets PRBs allows. free and
Cell reselection timer factor high mobility The cell reselection (t-ReselectionEUTRAN) is
therefore
for X2-based
multiplied avoid
by this interference
handover factor but
if the with
may UE neighbor
still
is in be the bands.
medium
Cell reselection timer factor medium mobility The cell
When set reselection
to that0 the timer (t-ReselectionEUTRAN)
Flexible UL Bandwidth feature for isis
Please
used as note
target forthe S1 default
based value is not suitable
Cell barred flag
high
multiplied
deactivated.
The
mobility
cell by state.
barred this flag factor indicates if thehandover.UE
if the is cell
in the medium
status
all bandwidths.
This parameter The
is only recommended
evaluated values are:is
mobility
barred state.
oreNodeB
not. A indicates barred
Cell capacity class value for
Thisinter parameter target cell cellsthe iswhicha cell can
value that be
that a UE is not
The
allowed
5
used MHz physical
as to
bandwidth
targetcamp allocationon,
forwith 15 not
X2-Handover policy
even to on
fortheasthe
emergency
wellRFclassifies
of thecalls. PRBIf
Cell individual offset of own serving cells PCI the
defined
Cell cell capacity
by
Individual blankedPucch
Offset regards
(CIO) follows
of own that other
served typical cells
cell of of
for
a
10
as
the cell
MHz
for on
eUTRAN. whichThe
bandwidth
S1-Handover a UE 20is Capacity
Cell currently Class camped Value becomesonly
PUCCH
insertion
barred,
15 PRB
into
cell the
abandwidth resources,CIO
reselection Cell which
isList are
of EUTRA
triggered. symmetrically Serving
Cell name ThisMHz
indicates parameter resources allows 30
that the are operator
configured to give for a cell a
traffic
distributed
Carrier
20 MHz at the edges
Measurement
bandwidth 40 of
Object the given system BW.
Cell reselection priority unique
purposes.
The cell name.
reselection priority parameter defines
In other
Only if CIOterms blankedPucch
is different from zero, resources will theare eNB the
Cell reset requested absolute
distributed
consider priority
it
Reset request for Cell at
for the ofBW
Measurement the serving
edges the layer.
very
Configuration. 0samemeans waythe as
Dependencies:
lowest
the resources
Will be priority.
downloaded defined with by current
nCqiRbtimestamp (of which they to are
Offset for minimum required RSRQ in cell (Rel9) maxNumQci1Drb
Offset +
to the signaled qQualMinR9 taken into
a
max( subset)
indicated reset request,
addNumQci1DrbRadioReasHo, new request will receive
Offset for minimum required RSRQ in cell (Rel9) account
Equal
When
Minimum setinrequired
tothe
priorities Squal
values between evaluation
different
quality RATs
level from inas
are 0not
the aallresult
supported
theless
cell. of a
PRBs
new
periodic timestamp
addNumQci1DrbTimeCriticalHo)
search and
for UEs therfeore
a36.304].
higher cause
priority must parameter
PLMN be while than
according
from
Not
change. 0 up
recognized to
to [3GPP
"blankedPucch"
by < Rel9. value are not used by
Cell scheduling request periodicity the
Define
camped margin the values
admitted
normally for the
Scheduling
in a VPLMN. used bandwidth
Request (see
periodicity
the PUCCH
Cell
values resetabove will allocation
be exceuted
(150,200)) algorithm automatically, for allocating since the
Cell type in
Not
This the cell, once allows
recognized
parameter bytheUEs scheduling
the< Rel9.
operator request to specify reproting the
periodic
parameter CQI. change requires cell lock/unlock.
has
size been
of an set
LTE tocell.enable
Enable aperiodic CQI reporting on PUSCH In other
String
O&M is words
switchin humanfor all those
enablingreadable PRBs up to e.g.
format, blankedPucch
This
It will parameter
be reporting
considered is part of feature LTE1140 CQI /
if:PUSCH.
the
/ disabling aperiodic
are
Cell
RI / skipped
reset
PMI by theon
requested periodic YYYYMMDD CQI allocation hhnnssalgorithm.
Aperiodic CQI feedback reporting mode sr-ConfigIndex
Corresponds to cqi-ReportingModeAperiodic
'Intrafrequency of
where
Parameter YYYYMMDD . See hhnnss is timestamp.
CQI periodicity network period 3GPP-36.213.
load balancing'
Example:
Sets the CQIblankedPucch isTS
CQI
Reporting
36.213indicator
format
activated = 6for
Periodicity
[23,10.1].
wouldderiving for for
mean
Np aperiodic
that CQI-
Operator
reporting define
on periodicity and system . define anone
the corresponding
allocation
CQI reporting. willPUSCH.start CellBetafrom The theoperator
coeffcient
seventh can
PRB, choose
the PRB
Periodic subband CQI cycles K allocation
This
of the is2the offset
family number modesin time;of periodic these subband
available, two the lelements
MIMO reporting
algorithm
#6.
For each
Enable simultaneous CQI and ACK/NACK combined
cycles
embedded
O&M (K).UE,
switch define
Itinfor the
isRRM RRC
the
required
enabling above
chooses
algorithm
only mentioned calculates
for configuring
the
/ disabling effective sr-mode
simultaneous a
All the
and adds PRB to up
this to the
parameter PRB#6 a excluded (three at
ConfigIndex
periodic
based on wideband
the UE + subband
capabilities reporting.
and the family It indicates
mode
DeltaF PUCCH format 1 transmission
each
specific
The BWNOffset,CQI,
parameter edge of accordingly
periodic
defines CQI
depending
the to/ PUCCH
RI on
transport / PMI the feedback
physical
format
the
chosen
and number
HARQ by theof periodic
ACK/NACK operator subband
and
on forwards
PUCCH. reporting this cycles
to UE;
allocation
UE
dependentoffsettwo policy)
allocation
offset are
in left free,
within
power the
control to
chosen avoid
for interferences
PUCCH format
DeltaF PUCCH format 1b between
FTB1
The selects
parameter consecutive
the definesreporting theperiodic
mode
transport wideband
2.x, FTB2
format selects
with
periodicity
1. neighbor bands
determining supported
the iCQI/PMI by other radio
reporting
the reporting instances.
DeltaF PUCCH format 2 dependent
technologies.
index
The valueoffset
parameter tomode be in
definessent 3.x;
power x UE.
tothe iscontrol
determined
transport forformat
PUCCH by theformat
MIMO
1b.
EXAMPLE: algorithm internal in control
eNB. for PUCCH format
DeltaF PUCCH format 2a dependent
The parameter offset in
defines power
Thedefault
by
2. configuration value ofinof20ms thethe blanked
only
transport PRBs format region in one
DeltaF PUCCH format 2b dependent
The parameter offset defines power the control
be transport for PUCCH format
operators
iCQI/PMI network
index values shallamong the 17 same andformatfor
36all the cells
2a.
dependent
having same offsetE-UTRA in power Operating control for
Band, PUCCH same format
Dedicated SR transmission maximum will
This be is allocated
the maximum by CQI/PMI number allocation
of the allowed
2b.
channel
algorithm.
dedicated bandwidth and same center carrier
Default paging cycle The
frequency defaultScheduling paging
(that is same cycle Requests.
defines the
Transmission
Once this limit is
cell-specific
bandwidthThe
exceeded,
paging DRX cycleUE releases duration. all PUCCH
It also determines resources.
Handover margin configuration
This parameter
value 4n corresponds according
defines to4 3GPP-36.104).
the minimum signal the
maximum
difference paging DRXtoduration transmissions,applicable8n in the
Delta preamble random access message 3 corresponds
Used
cell. forofthe to 8 transmissions
calculation of and so on.
In case
between contemporary
the target and the source activation of
cell the LTE46:
P0_NOMINAL_PUSCH(j=2)
Referred
Channel-aware to as 'T ' inshift
Scheduler TS 36.304.
(UL) for PUSCH
Value
feature rf32
one
Delta cyclic shift for PUCCH This
required
Indirectly is a for
(re)transmission
delta
provides cyclic
triggering the
corresponding an for PUCCH
intra-frequency
UE-specific to maximum
the
formats
random HOmust due to
time
corresponds
take
1/1a/1b.
load care The
unbalance. of to
theshift32correct
isradio
the frames,
choice
cyclic of
shift rf64
the corresponds
SRS
difference to
Enabled TB size impact to UE PUSCH power calculation within
access
64 which
Enabling/disabling
radioresponseframes the UE
and of
grant. must the
sothat receive
transport a
on.SRS signal is sent within valid
format uplink
configuration
between
grant two
for a new to avoid
adjacent
offsettransmission ACK/NACK/Scheduling
64on
dependent on a per UE basis.UL-SCH. If thisIf this for time
Enable 64QAM in downlink Enables/disables
the
Request blanked resourcesRF area.downlink
using the QAM
same modulation
orthogonal cover
expires,
parameter the isUE enabled,releases PUSCH PUCCH power resources calculation and no
in
Cell power reduce link
sequence
Sets adaptation
the and can
power use
reduction in PDSCH.
be decided from considering
the antenna multipath
longer
UE uplink performspower acontrol
dedicated equation Scheduling (P1) takesRequest,the
delay
maximum
but
Transport spreads
instead TX
Block forsize
power.
performs thein agiven
random
account cell accessdeployment.
duringthe Scheduling
the power
Downlink channel bandwidth Downlink
Parameter channel
is one bandwidth
parameter defines
in a setcell which DL defines
Request. This
calculation.
bandwidth for timeeNode-B
the is calculated transmission by Scheduling
Enable downlink interference generation the
The
Request maximum
parameter periodicity PUCCH
dlInterferenceEnable
* allocationSR
dedicated called is usedas a for
transmission
in cell,
and also
MaxPucchResourceSize.
enabling defines the
and disabling interference number of available
All the restdefines of the
generation Physical in
Interference level for generated downlink interference maximum.
The
Resource dlInterferenceLevel
Blocks. parameter
parameters
downlink. arephysicalrelated resource to each others according to
Modulation scheme for downlink interference percentage
The
The of
downlink channel bandwidth
dlInterferenceModulation blocks
parametermapping (PRB) to
defines that
this formula:
are
number usedoffor downlink
Physical data
Resource andBlocks interference
Downlink MIMO mode modulation
MaxPucchResourceSize
The used=DL scheme
MIMO to
mode be=used nCqiRb
for eachfor + is:
generated
transmission.
5.0
downlink MHz 25
interference.DL PRBS That is, for a non-existing UE
roundup{[((maxNumOfCce)
physical channel isPRBSthe following: + n1PucchAn -
Enable OLQC 10.0
O&M
the MHz
switch
downlink
pucchNAnCs = 50 for DLenabling
interference
* 3 / deltaPucchShift /isdisabling
transmitted. ) downlink
* Outer
0:
15.0
loop SingleMHz
Link Stream
= 75 DL
Quality Downlink:
PRBS which All is acting based on
Downlink pathloss change deltaPucchShift]
This
downlink is a trigger
physical /Control
(3*12)}
condition
channels +
forroundup
arepower transmitted (pucchNAnCs /
headroom
20.0
the
8) 1stMHz =
transmission 100 DL PRBS
HARQ result, that is, 1st
Downlink PCFICH transmission power boost submission
using
Transmission this mode;due power to pathloss of the change;
Physical named
Control Format
transmission
maxNumOfCce
ULATB_DLPL_CHANGE BLER. depends on dlChBw
inTransmit
RRM SFS. parameter:
1:
This Single
Indicator parameterStreamis
Channel Downlink
is
one boosted
of the by set
parameters value in a
Downlink PHICH transmission power boost -Transmission
if dlChBwAllisdownlink
Diversity: power then
5MHz ofphysical
themaxNumOfCce
Physical channels Hybrid isARQ21set
which
Indicator
- if dlChBw defines
Channel
is 10MHzthe maximum
is boosted PUCCH
by set allocation
value
are
called transmitted
as MaxPucchResourceSize.using then this mode; maxNumOfCce is 43
All the rest
-2:ifDual
dlChBw Stream is 15MHz MIMO then
Spatial maxNumOfCce
Multiplexing: is 65of the
parameters
- if dlChBw are
is 20MHz related then maxNumOfCce is 87 to
to each others according
SRB1
this (DCCH)
formula: and RBs(DTCH)
All
on the rest of
PDSCH are transmitted the parameters using in formulaDual are O&M
MaxPucchResourceSize
parameters, and MaxPucchResourceSize = nCqiRb + has a
Stream MIMO
roundup{[((maxNumOfCce) with spatial multiplexing;
+ n1PucchAn -
maximum
SRB0 (CCCH), allowed BCCH value, and which
PCCH shall on not be
pucchNAnCs
exceeded * 3 / deltaPucchShift ) *
PDSCH
deltaPucchShift] and all other / (3*12)} physical + roundup channels (pucchNAnCs /
are transmitted using Single Stream
Downlink reference signals transmission power boost Transmission power of the downlink reference
DL target BLER signals
Definesin a cellBlock
target is boosted by set(BLER)
Error Ratio value compared
for to
PDSCH
downlink Link Adaptation in percents. Used with
Default CQI Defines the default Channel Quality Indicator (CQI)
downlink
value for Outer loop
downlink Link
Link Quality Control
Adaptation use. (OLQC)
Default CQI
Enable DL AMC O&M switch
functionality. for enabling / disabling downlink
is used
Adaptive when there is
Modulation and no valid CQI available, that is,
MIMO power compensation Sets
a CQIthe compensation
report in Coding.
is not received TxDiv
or it and 2x2
is too MIMO SM
old.
DCI format for common channel transmission case into the
Parameter to DL power whether
configure control. common channel
On-line 0ms (0), 40ms (1), 64ms (2), 80ms (3), 480ms (9)
100ms
0ms (0),(4), 40ms128ms (1), (5),
64ms 160ms (6), 256ms
(2), 80ms (3),
On-line (7), 320ms (8), 480ms (9), 512ms (10), -
100ms
0ms (0),(4),
40ms128ms (1), (5),
64ms 160ms
(2), (6), 256ms
80ms (3),
On-line 640ms
(7), 320ms(11),(8),1024ms
480ms (12),
(9), 1280ms
512ms (13),
(10), 480ms (9)
100ms
2560ms (4),
0ms (0),(11),40ms128ms
(14), 5120ms (5),
(1), 64ms 160ms
(15), (6),
notUsed 256ms
(2), 80ms (13),(16)
(3),
On-line 640ms
(7), 320ms 1024ms
(8), 480ms (12),
(9), 1280ms
512ms (10), 480ms (9)
100ms
2560ms
0ms (4), 128ms
(14),
(0),(11),
40ms 5120ms (5),
(1), 64ms 160ms
(15) (6), 256ms
(2), 80ms (13),
(3),
On-line 640ms
(7), 320ms 1024ms
(8), 480ms (12),
(9), 1280ms
512ms (10), -
100ms
2560ms (4),
-15...15(11), 128ms
(14),
dB, step 5120ms (5), 160ms
(15), (6),
notUsed
0.5 dB 1280ms (13), 256ms
(16)
On-line 640ms
(7), 320ms (8), 1024ms
480ms(12), (9), 512ms (10), -
On-line 2560ms
120ms
640ms (0), (14),
(11), 5120ms
240ms
1024ms (15),
(1),(12),
480ms notUsed
1280ms (16)
(2), 640ms
(13), 640ms (3)
(3),
0ms (0), 40ms (1), 64ms (2), 80ms (3),(6),
1024ms
2560ms (14), (4), 2048ms
5120ms (15)(5), 5120ms
On-line 10240ms (7), 1min(5), (8), 6min (9), 12min 320ms (8)
100ms
120ms (4),
(0), 128ms
240ms (1), 160ms
480ms (6),
(2), 256ms
640ms
On-line (10),
(7), 30min
320ms (11),
(8), 60min
480ms (12)
(9),(5),
512ms (10),(6), 640ms (3)
(3),
0ms 1024ms
(0),(11),
40ms (4), 2048ms
(1), 64ms (2), 5120ms
80ms (13),
(3),
On-line 640ms
10240ms (7),1024ms
1min (12),
(8), 6min1280ms
(9), 12min 320ms (8)
100ms
2560ms
Bit (4),
0: 30min 128ms
(14),
AC 11,(11), 5120ms (5),
Bit 1:60min
AC 12,160ms
(15) (6), 256ms
Bit 2: AC 13, Bit
On-line (10),
(7), 320msBit(8), 480ms (12)
(9), 512ms (10), 0
3:
4sAC(0),14,
8s 4:16s
AC(2),
(1),1024ms 15,32s (3), 64s (4),
On-line 640ms (11), (12), 1280ms (13), -
128s
2560ms (5), 256s
(14), (6),
5120ms 512s (7)
(15)
0% (0), 5% (1), 10% (2), 15% (3), 20% (4),
On-line -
25%
Bit 0:(5),
AC 30%11, Bit (6),
1: 40%
AC 12, (7),Bit
50% (8),13,
2: AC 60%Bit
On-line (9), 70% (10), 75% (11), 80% (12), 85% 0
3:
4s AC 14,
(0),90% Bit
8s (1), 4: AC 15,
On-line (13), (14),16s95%(2),(15)
32s (3), 64s (4), -
128s
0% (0), (5),5% 256s
(1),(6),
10% 512s
(2), (7)
15% (3), 20% (4),
On-line -
25%
Bit 0:(5),
AC 30%
11, Bit(6),
1: 40%
AC 12, (7),Bit
50% (8),13,
2: AC 60%Bit
On-line (9), 70% (10), 75% (11), 80% (12), 85% 0
3:
4s AC
(0), 14,
8s Bit
(1),4: AC
16s 15,
(2), 32s (3), 64s (4),
On-line (13), 90% (14), 95% (15) -
128s
0% (0), (5),5%256s
(1),(6),
10% 512s
(2), (7)
15% (3), 20% (4),
On-line -
25% (5), 30% (6), 40%
Bit 0: AC 11, Bit 1: AC 12, (7),Bit
50% (8),13,
2: AC 60%Bit
On-line (9), 70% (10), 75% (11), 80% (12), 85% 0
3:
4s AC 14,
(0),90% Bit
8s (1), 4: AC 15,
On-line (13), (14),16s
95% (2),(15)
32s (3), 64s (4), -
128s
0% (0), (5),5%256s
(1),(6),
10% 512s
(2), (7)
15% (3), 20% (4),
On-line -
25%
Bit 0:(5),
AC 30%
11, Bit(6),
1: 40%
AC 12,(7),Bit
50% (8),13,
2: AC 60%Bit
On-line (9), 70% (10), 75% (11), 80% (12), 85% 0
3:
4s AC
(0),14,
8s Bit
(1),4: AC
16s 15,
(2), 32s (3), 64s (4),
On-line (13), 90% (14), 95% (15) -
128s
0% (0),(5),5%256s
(1),(6),
10% 512s
(2), (7)
15% (3), 20% (4),
On-line -
25% (5), 30%
false (0), true (1)(6), 40% (7), 50% (8), 60%
On-line (9), 70% (10), 75% (11), 80% (12), 85% true (1)
On-line false 90%
(13), (0), true (1)95% (15)
(14), true (1)
On-line false (0), true (1) false (0)
Requires object locking 0 (false), 1 (true) false (0)
On-line false (0), true (1) false (0)
On-line QPSK (0), 16QAM (1), 16QAMHighMCS QPSK (0)
(2)
false (0), true (1)
On-line true (1)
On-line false (0), true (1) false (0)
On-line false (0), true (1) true (1)
BTS restart needed none (0), Dedicated (1), Coupled (2) none (0)
On-line 0 (false), 1 (true) false (0)
Requires object locking 0 (false), 1 (true) false (0)
On-line 0 (false), 1 (true) false (0)
On-line off (0), slowAmc (1), slowAmcATB (2), eUlLa (5)
slowAmcOlla
0...840, step 1(3), slowAmcOllaATB (4),
On-line eUlLa (5) 15
On-line 0...840, step 1 20
On-line 0...840, step 1 70
On-line 0... 30 % 5
On-line 0... 30 % 10
On-line 0...4200, step 1 35
On-line 0...4200, step 1 60
On-line 0...200, step 1 15
On-line 0...200, step 1 20
On-line 1...32, step 1 1
On-line unlocked (1), shutting down (2), locked (3) locked (3)
On-line -5...91, step 1 47
On-line extendedDrxOnly (0), allDrx (1), allUEs (2) extendedDrxOnly (0)
On-line allEqual (0), onlyX2 (1) allEqual (0)
On-line 0...65535, step 1 65536
On-line n4 (0), n8 (1), n12 (2), n16 (3), n24 (4), n32 -
(5), n48 step
0...503, (6), n64
1 (7), n84 (8), n96 (9), n128
On-line (10), n168 (11), n252 (12), n504 (13), -
Requires object locking 0...60,
noRange step 2
(14) 0
On-line 0.25 (0), 0.5 (1), 0.75 (2), 1 (3) -
On-line 0.25 (0), 0.5 (1), 0.75 (2), 1 (3) -
On-line barred (0), notBarred (1) notBarred (1)
On-line 1... 100 100
On-line -24dB (0), -22dB (1), -20dB (2), -18dB (3), 0dB (15)
-16dB (4), -14dB (5), -12dB (6), -10dB (7),
0...80 characters
On-line -8dB (8), -6dB (9), -5dB (10), -4dB (11), -
On-line 0...7, step 1-2dB (13), -1dB (14), 0dB (15),
-3dB (12), -
Requires object locking 1dB (16), 2dB (17), 3dB (18), 4dB (19),
15...15 characters -
5dB (20), 6dB (21), 8dB (22), 10dB (23),
On-line 1...8
12dBdB, step
(24), 1 dB
14dB (25), 16dB (26), 18dB -
On-line (27), 20dB
-34...-3 dB,(28),
step 22dB
1 dB (29), 24dB (30) -
Requires object locking 5ms (0), 10ms (1), 20ms (2), 40ms (3), 20ms (2)
80ms (4) (0), small (1), medium (2), large
very_small
On-line large (3)
(3)
false (0), true (1)
On-line true
Requires object locking FBT1 (0), FBT2 (1) FBT2 (1)
Requires object locking 2ms (0), 5ms (1), 10ms (2), 20ms (3) 20ms (3)
Requires object locking 1...4, step 1 1
On-line false (0), true (1) true (1)
On-line -2 (0), 0 (1), 2 (2) 0 (1)
On-line 1 (0), 3 (1), 5 (2) 1 (0)
On-line -2 (0), 0 (1), 1 (2), 2 (3) 0 (1)
On-line -2 (0), 0 (1), 2 (2) 0 (1)
On-line -2 (0), 0 (1), 2 (2) 0 (1)
Requires object locking 4n (0), 8n (1), 16n (2), 32n (3), 64n (4) 64n (4)
On-line 32rf (0), 64rf (1), 128rf (2), 256rf (3) 128rf (2)
On-line -8... 8 dB 0
On-line -1...6, step 1 1
Requires object locking 1...3, step 1 2
On-line false (0), true (1) false
On-line false (0), true (1) false (0)
Requires object locking 0...20 dB, step 0.1 dB 0 dB
BTS restart needed 1.4 MHz (14), 3 MHz (30), 5 MHz (50), 10 MHz (100)
On-line 10 MHz
false (0), (100),
true (1)15 MHz (150), 20 MHz false
(200)
0...100 %, step 1 %
On-line 0%
On-line QPSK (0), 16QAM (1), 64QAM (2) QPSK (0)
Requires object locking SingleTX (0), TXDiv (10), 4-way TXDiv TXDiv (1)
On-line (11), (0),
false Static
trueOpen
(1) Loop MIMO (20), true
Dynamic Open Loop MIMO (30),
1 db (0), 3 db (1), 6 db (2), infinite (3)
On-line Closed Loop Mimo (40), Closed Loop 3 db (1)
On-line 0...6
MIMO dB,(4x2)
step 0.1
(41)dB 0 dB
On-line 0...6 dB, step 0.1 dB 0 dB
Requires object locking 0dB (0), 1.77dB (1), 3dB (2), 4.77dB (3), 0dB (0)
6dB (4) step 0.1
0.1..99.9,
On-line 10
On-line 0...15, step 1 2
On-line false (0), true (1) true
Requires object locking 0...10 dB, step 0.01 dB 0 dB
Not modifiable DCI format 1C (0) DCI format 1C (0)
Requires object locking TTA (0), PFsch (1) PFsch (1)
On-line 0.9...0.99, step 0.01 0.98
On-line not used (0), PRBs with PSS or SSS used
PRBs with PSS or SSS and PBCH used (2)
(1),
falsePRBs with(1)
(0), true PSS or SSS and PBCH
On-line used (2) true
Not modifiable 1 (1) 1 (1)
On-line 0...50, step 1 45
On-line 10 (10), 20 (20), 30 (30), 40 (40), 50 (50), 200 (200)
60 (60),
40ms 80 80ms
(40), (80), 200
(80),(200)
160ms (160)
On-line 160ms (160)
On-line 6 (6), 8 (8), 10 (10), 20 (20) 6 (6)
Not modifiable 101 (101) 101 (101)
On-line 0...50, step 1 30
On-line 4 (4), 6 (6), 8 (8) 4 (4)
On-line 750 (750), 1280 (1280), 1920 (1920), 2560 2560 (2560)
(2560)
320ms (320), 640ms (640), 1280ms
On-line 1280ms (1280)
(1280),
10 (10),2560ms
20 (20), (2560)
30 (30), 40 (40), 50 (50),
On-line 10 (10)
60 (60),
102 (102)80 (80), 100 (100), 200 (200)
Not modifiable 102 (102)
On-line 0...50, step 1 30
On-line 4 (4), 6 (6), 8 (8), 16 (16), 24 (24), 33 (33) 16 (16)
On-line 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 8 (8) 4 (4)
On-line 20ms (20), 40ms (40) 40ms (40)
On-line 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 8 (8), 6 (6)
10 (10)
2 (2)
Not modifiable 2 (2)
On-line 0...50, step 1 40
On-line 1 (1), 2 (2), 4 (4), 6 (6) 4 (4)
On-line 10 (10), 20 (20), 30 (30), 40 (40), 50 (50), 10 (10)
60
40 (60),
(40), 80
80 (80)
(80)
On-line 80 (80)
On-line 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 8 (8), 6 (6)
10 (10)
3 (3)
Not modifiable 3 (3)
On-line 0...50, step 1 30
On-line 1 (1), 2 (2), 4 (4), 6 (6) 4 (4)
On-line 200 (200), 300 (300), 500 (500), 750 (750), 500 (500)
1280 (1280),
160 (160), 1920
320 (1920), 2560 (2560)
(320)
On-line 320 (320)
On-line 10 (10), 20 (20), 30 (30), 40 (40), 50 (50), 10 (10)
60 (60), 80 (80), 100 (100)
4 (4)
Not modifiable 4 (4)
On-line 0...50, step 1 20
On-line 4 (4), 6 (6), 8 (8), 16 (16), 24 (24), 33 (33) 16 (16)
On-line 750 (750), 1280 (1280), 1920 (1920), 2560 2560 (2560)
(2560)
640 (640), 1280 (1280), 2560 (2560)
On-line 2560 (2560)
On-line 10 (10), 20 (20), 30 (30), 40 (40), 50 (50), 10 (10)
60 (60), 80 (80), 100 (100), 200 (200)
5 (5)
Not modifiable 5 (5)
On-line 0...50, step 1 10
On-line 4 (4), 6 (6), 8 (8), 16 (16), 24 (24), 33 (33) 16 (16)
On-line 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 8 (8) 4 (4)
On-line 20ms (20), 40ms (40) 40ms (40)
On-line 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 8 (8), 6 (6)
10 (10)
2 (2)
Not modifiable 2 (2)
On-line 0...50, step 1 40
On-line 1 (1), 2 (2), 4 (4), 6 (6) 4 (4)
On-line 10ms (10), 20ms (20), 40ms (40) 40ms (40)
On-line 1...16, step 1 1
On-line 2...124, step 2 124
On-line 10 (10), 20 (20), 30 (30), 40 (40), 50 (50), 10 (10)
60 (60),
40ms 80 80ms
(40), (80) (80)
On-line 80ms (80)
On-line 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 8 (8), 6 (6)
10 (10)
3 (3)
Not modifiable 3 (3)
On-line 0...50, step 1 30
On-line 1 (1), 2 (2), 4 (4), 6 (6) 4 (4)
On-line 20ms (20), 40ms (40) 40ms (40)
On-line 1...16, step 1 5
On-line 2...124, step 2 6
On-line 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 8 (8), 50 (50)
10 (10),(160),
160ms 20 (20), 30 (30),
320ms 40 (40), 50 (50),
(320)
On-line 60 (60), 80 (80), 100 (100), 200 (200), 300 320ms (320)
On-line 10 (10),
(300), 20(500),
500 (20), 30
750(30), 40 (40),
(750), 1280 50 (50),
(1280), 10 (10)
60 (60),
1920
4 (4) 80 (80),
(1920), 2560100 (100)
(2560)
Not modifiable 4 (4)
On-line 0...50, step 1 20
On-line 4 (4), 6 (6), 8 (8), 16 (16), 24 (24), 33 (33) 16 (16)
On-line 10ms (10), 20ms (20), 40ms (40), 80ms 80ms (80)
(80),
1...16,160ms
step 1(160)
On-line 4
On-line 2...124, step 2 4
On-line 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 8 (8), 50 (50)
10 (10),(640),
640ms 20 (20), 30 (30),
1280ms 40 (40),
(1280), 50 (50),
2560ms
On-line 60 (60), 80 (80), 100 (100), 200 (200), 300 2560ms (2560)
(2560)
10 (10), 20(500),
(20), 30 (30), 40 (40),
On-line (300), 500 750 (750), 1280 50 (50),
(1280), 10 (10)
60 (60),
1920
5 (5) 80
(1920),(80),
2560100 (100),
(2560) 200 (200)
Not modifiable 5 (5)
On-line 0...50, step 1 10
On-line 4 (4), 6 (6), 8 (8), 16 (16), 24 (24), 33 (33) 16 (16)
On-line 10ms (10), 20ms (20), 40ms (40), 80ms 80ms (80)
(80),
1...16,160ms
step 1(160), 320ms (320), 640ms
On-line (640) 16
On-line 2...124, step 2 32
On-line Not used (0), barred (1), Not barred (2) -
On-line 10...50, step 5 30
On-line 20...50, step 5 30
On-line 1...6, step 1 3
On-line 1...4, step 1 1
On-line 1...5, step 1 1
On-line 0.5...0.9, step 0.05 0.8
Requires object locking 0...65535, step 1 0
Requires object locking 0...65535, step 1 18000
On-line 0... 16777215 -
On-line false (0), true (1) true (1)
On-line false (0), true (1) true (1)
On-line false (0), true (1) false (0)
BTS restart needed false (0), true (1) true (1)
On-line false (0), true (1) false (0)
On-line false (0), true (1) true (1)
Not modifiable 0...268435455, step 1 -
BTS restart needed 0...3000000 kHz, step 1 kHz -
On-line fc0 (0), fc1 (1), fc2 (2), fc3 (3), fc4 (4), fc5 fc4 (4)
(5), fc6 (6),
fc0 (0), fc7 (7),
fc1 (1), fc8 fc3
fc2 (2), (8), (3),
fc9 fc4
(9), (4),
fc11fc5
On-line (10), fc13 (11), fc15 (12), fc17 (13), fc19 fc4 (4)
(5),
fc0 fc6 fc1 (1), fc2 (2), fc3 (3), fc4 (4),
(0), fc5
On-line (14)
(6), fc7 fc4 (4)
(5),
fc0 fc6 fc1 (1), fc2 (2), fc3 (3), fc4 (4),fc13
(0),
(7), fc8 (8), fc9 (9), fc11 (10),
fc5
On-line (11),
(6), fc15
fc7 (7), fc8 (8), fc9 (9), fc11 (10), fc13 fc4 (4)
(5),
(12),
fc0 fc6 (6),
fc17
(0), fc7
(13), (7),
fc19 fc8 (8),
(14) fc9 (9), fc11
fc1 (1), fc2 (2), fc3 (3), fc4 (4), fc5
On-line (11),
(10), fc15
fc13 (11), fc4 (4)
(5),
(12),
fc0 fc6 (6),
fc17
(0), fc7 fc15
fc1(13),
(1), (7), (12),
fc8
fc19(2),
fc2 (8),fc17
(14)
fc3 fc9 (13),
(3), fc4
fc19
(9), (4),
fc11 fc5
On-line (14),
(10), notUsed
fc13 (11), (15)
fc15 (12), fc17 (13), fc19 fc4 (4)
(5), fc6
fc0 (0), (6), fc7 (7),
fc1 (1),(15) fc8 (8), fc9 (9), fc11
fc2 (2), fc3 (3), fc4 (4), fc5
On-line (14),
(10), notUsed
fc13 (11), fc15 (12), fc4 (4)
(5),
fc0 (0), fc1 (1), (7),
fc6 (6), fc7 fc8
fc2 (2), (8),fc17
fc3 fc9 (13),
(3),
fc19
(9), (4),
fc4 fc11 fc5
On-line (14)
(10), fc13 fc2 (2)
(5),
Not fc6 (6),(11),
Reserved
fc15
fc7(0), (12),
(8),fc17
(7),Reserved
fc8 fc9 (13), fc19
(9), fc11
(1)
On-line (14)
(10), fc13 (11), fc15 (12), fc17 (13), fc19 Not Reserved (0)
On-line 0...999,
(14), step 1(15)
notUsed -
On-line 0...999, step 1 -
On-line 2...3, step 1 -
On-line none (0), l2only (1), l2andl3 (2) none (0)
BTS restart needed 0...29, step 1 0
On-line 1...8, step 1 5
On-line 1...16, step 1 5
On-line 1...7, step 1 5
On-line 4...28, step 4 12
Not modifiable interSubFrame (0) interSubFrame (0)
Requires object locking scenario1 (1), scenario 3 (3) -
On-line 0...15 dB, step 0.5 dB -
On-line 0...15 dB, step 0.5 dB -
On-line 0...15 dB, step 0.5 dB -
On-line 0...15 dB, step 0.5 dB -
On-line 0...15 dB, step 0.5 dB 2 dB
On-line 0...15 dB, step 0.5 dB -
On-line 0...15 dB, step 0.5 dB -
On-line 0... 100 % 0
On-line 0... 100 % 60
On-line 0... 100 % 85
On-line 0...100 %, step 1 % 80%
On-line 0.001 (1), 0.002 (2), 0.005 (5), 0.01 (10), 1 (1000)
0.02 (20),
0... 100 %
On-line 0.05 (50), 0.1 (100), 0.2 (200), 0.5 (500), 1 50
On-line 0...
(1000), %
100 75
On-line 2 (2000),
0...100 %,5step
(5000),
1 %10 (10000) 50%
On-line 0... 7 -
0... 100 % 0
On-line 0...2000 ms, step 5 ms 200 ms
On-line 10...65535 s, step 1 s 30 s
On-line 0...28, step 1 4
On-line 0...20, step 1 5
On-line 1...100, step 1 10
On-line allowed (0), notAllowed (1) -
On-line false (0), true (1) -
Not modifiable 0...255, step 1 1
Not modifiable 0...65535, step 1 -
On-line slow (0), medium (1), fast (2) medium (1)
On-line -10... 0 dB -10
On-line 1000...300000 kbps, step 500 kbps 170000 kbps
On-line 1000...75000 kbps, step 500 kbps 60000 kbps
On-line 0.05...0.5, step 0.01 0.12
On-line 0.05...0.5, step 0.01 0.12
On-line 0.05...0.5, step 0.01 0.12
On-line 0.05...0.5, step 0.01 0.26
On-line 30... 90 % 75
On-line 1...3, step 1 3
On-line 0...4200, step 1 600
On-line 0...840, step 1 300
On-line 0...50, step 1 20
On-line 0...200, step 1 100
On-line 0...840, step 1 300
On-line 0...840, step 1 440
On-line 1...20, step 1 14
On-line 1...20, step 1 14
On-line ueCapability (0), OaM (1) ueCapability (0)
On-line cpichRSCP (0), cpichEcN0 (1) cpichRSCP (0)
On-line cpichRSCP (0), cpichEcN0 (1), notUsed cpichRSCP (0)
(2)
0...16, step 0.1
On-line 7
On-line 0...16, step 0.1 8
On-line 1...2, step 0.05 1.4
On-line 1...2, step 0.05 1.6
On-line 0...16, step 0.1 7
On-line 0...16, step 0.1 8
On-line 1...2, step 0.05 1.4
On-line 1...2, step 0.05 1.6
On-line 5...300000 kbps, step 5 kbps 30 kbps
On-line 5...75000 kbps, step 5 kbps 30 kbps
On-line 1...8, step 1 -
On-line 1...128, step 1 -
On-line 2...128, step 1 -
On-line 1...16, step 1 -
On-line 1...16, step 1 -
On-line 30s (0), 60s (1), 120s (2), 180s (3), 240s -
(4),
30s spare3
(0), 60s(5),
(1),spare2 (6),180s
120s (2), spare1
(3),(7)
240s
On-line -
(4), spare3
2 (0), 4 (1), (5), spare2
8 (2), 16 (3)(6), spare1 (7)
On-line 2 (0)
Requires object locking 10...2047, step 1 36
On-line n1 (0), n2 (1), n3 (2), n4 (3), n6 (4), n8 (5), n10 (6)
n10 (6),n2
n1 (0), n20
(1),(7)
n3 (2), n4 (3), n5 (4), n6 (5),
On-line n1 (0)
n8 (6), step
1...98, n10 (7)
1
Requires object locking 2
On-line -24dB (0), -22dB (1), -20dB (2), -18dB (3), 0dB (15)
-16dB
disabled(4),(0),
-14dB (5), -12dB
enabled (1) (6), -10dB (7),
Not modifiable -8dB (8), -6dB (9), -5dB (10), -4dB (11), disabled (0)
On-line -127...-96
-3dB (12), dBm, step 1-1dB
-2dB (13), dBm(14), 0dB (15), -100 dBm
On-line 1dB (16), dBm,
-126...24 2dB (17),
step 3dB
1 dBm(18), 4dB (19), -80 dBm
5dB (20), 6dB (21), 8dB (22), 10dB (23),
BTS restart needed 10.0
12dB (100),
(24), 14dB37.0(25),
(370), 39.0
16dB (390),
(26), 18dB -
40.0 (400),(28),
(27), 20dB 41.8 (418),
22dB 43.0
(29), 24dB(430),
(30)
44.3 (443),
44.8 (448), 46.0 (460), 47.8 (478),
49.0 (490)
On-line -30...33 dBm, step 1 dBm -
On-line -30...33 dBm, step 1 dBm -
On-line oneT (2), halfT (3), quarterT (4), quarterT (4)
oneEighthT
1 (0), 2 (1), 4(5),
(2),oneSixteenthT
8 (3) (6),
On-line oneThirtySecondT (7) 4 (2)
On-line 4...8, step 4 4
On-line 4...8, step 4 4
On-line 4...8, step 4 4
On-line 4...8, step 4 4
On-line 4...8, step 4 4
On-line 0.5...2, step 0.05 0.8
On-line -10...10, step 0.1 -5
On-line 0.1...3 %, step 0.1 % 1%
On-line 0.1...0.9, step 0.05 0.5
On-line wideband (0), UE_selected (1) wideband (0)
On-line false (0), true (1) false
On-line periodicIntraFreq (0) periodicIntraFreq (0)
On-line 8 (0), 32 (1), 64 (2), infinity (3) 32 (1)
On-line 120ms (1), 240ms (2), 480ms (3), 10240ms (8)
Requires object locking 640ms (0),
Normal (4),Extended
1024ms (1)(5), 2048ms (6), Normal (0)
5120ms (7),
N = 1/6 (0), N = 1/2 (1), N = 1 (2), N = 2 (3)
Requires object locking 10240ms (8), 1min (9), 6min (10), N = 1/6 (0)
Requires object locking 0...503, step 130min (12), 60min (13)
12min (11), -
BTS restart needed 0...15, step 1 12
BTS restart needed 3...24, step 1 3
BTS restart needed 0...94, step 1 -
Requires object locking false (0), true (1) false
On-line 0dB (0), 2dB (1), 4dB (2), 6dB (3) 2dB (1)
On-line 3 (0), 4 (1), 5 (2), 6 (3), 7 (4), 8 (5), 10 (6), 10 (6)
20
Not(7), 50 (8), 100
Reserved (9), 200 (10)
(0), Reserved (1)
On-line Not Reserved (0)
On-line 6 PRB (6), 15 PRB (15), 25 PRB (25), 50 -
PRB (50), 152 (152), 153 (153), 156 (156),
151 (151),
On-line 75 PRB (75), 100 PRB (100) 151 (151)
157
Bit 0: prsMutingInfoBit16, Bit 1:
On-line (157), 471 (471), 472 (472), 473 (473), 476 0
prsMutingInfoBit15,
2 (2 bits), 4 (4 bits), 8 (8 bits), 16 (16 bits)
On-line (476),
Bit 2: prsMutingInfoBit14, Bit 3: -
On-line 477
1... 2(477), 1111 (1111), 1112 (1112), 1113
prsMutingInfoBit13, 1
(1113),
Bit 4: prsMutingInfoBit12, Bit 5:
On-line -3...
1116 7.78 dB 1117 (1117), 2391
(1116), (2391), 0
prsMutingInfoBit11,
Not modifiable 2392
0...0,
Bit 6: step 1
prsMutingInfoBit10, Bit 7: 0
(2392), 23931 (2393), 2396 (2396), 2397
prsMutingInfoBit9,
Requires object locking 0...10, step 10
(2397)
Bit 8: prsMutingInfoBit8, Bit 9:
Requires object locking 2...15, step 1 8
prsMutingInfoBit7,
Requires object locking 0...12,
Bit 10: step 1
prsMutingInfoBit6, Bit 11: 10
prsMutingInfoBit5,
0dB (0), 1dB (1), 2dB (2), 3dB (3), 4dB (4),
On-line -
Bit
5dB 12:
(5),prsMutingInfoBit4,
6dBstep
(6),18dB Bit 13:
On-line -34...-3 dB,
prsMutingInfoBit3, dB (7), 10dB (8), 12dB -
(9), 14dB (10), 16dB (11), 18dB (12), 20dB
On-line Bit
(13),14:22dB
2...16 prsMutingInfoBit2,
dB, step dB (15)Bit 15:
(14),224dB -
prsMutingInfoBit1
On-line -140...-44 dBm, step 2 dBm -
On-line -140...-44 dBm, step 2 dBm -
Requires object locking 8ms (0), 16ms (1), 24ms (2), 32ms (3), 64ms (7)
40ms
0...15,(4),
step48ms
1 (5), 56ms (6), 64ms (7)
Not modifiable 5
Requires object locking -infinity (0), 0 dB (1), 5 dB (2), 8 dB (3), 10 10 dB (4)
dB (4),8 12
4 (0), (1),dB
12(5),
(2),15
16dB
(3),(6),
2018
(4),dB
24(7)
(5), 28
Requires object locking 40 (9)
(6), 328(7),
4 (0), (1),36
12(8),
(2),40
16(9),
(3),44
20(10), 48(5),
(4), 24 (11),28
Requires object locking 52 (12), 56 (13), 60 (14), 64 (15) 32 (7)
(6), 323(7),
2 (0), (1),36 (8),540
4 (2), (9),
(3), 44 (10),
6 (4), 7 (5),488 (11),
(6),
Requires object locking 52 10 (7)
10 (12),
(7) 56 (13), 60 (14)
Not modifiable 0...15, step 1 5
On-line 56 bits (0), 144 bits (1), 208 bits (2), 256 144 bits (1)
bits (3) step 0.01
1...1.5,
On-line 1.03
On-line 1...1.5, step 0.01 1.02
On-line false (0), true (1) false
On-line false (0), true (1) false
On-line false (0), true (1) false
On-line 1...100 PRB, step 1 PRB 50 PRB
On-line 1...100 PRB, step 1 PRB 25 PRB
On-line 1...100 PRB, step 1 PRB 1 PRB
On-line false (0), true (1) false
BTS restart needed false (0), true (1) false(0)
Requires object locking 1 (0), 2 (1) 2 (1)
BTS restart needed -1...0, step 1 0
BTS restart needed 0...837, step 1 -
On-line 0ms (0), 40ms (1), 64ms (2), 80ms (3), 480ms (9)
100ms (4),step
0...15 dB, 128ms0.5 (5),
dB 160ms (6), 256ms
On-line (7), 320ms (8), 480ms (9), 512ms (10), 0 dB
On-line -19.5...-3
640ms dB,1024ms
(11), step 0.5(12),
dB 1280ms (13), -19 dB
On-line 2560ms
0...62 dB,(14),
step5120ms
2 dB (15) -
On-line 0...31 dB, step 1 dB -
On-line 0...62 dB, step 2 dB -
On-line 0...62 dB, step 2 dB -
On-line 0...31 dB, step 1 dB -
On-line 0...62 dB, step 2 dB -
On-line 1ms (0), 2ms (1), 5ms (2), 10ms (3), 15ms -
(4),
80ms 20ms
(0), (5),
160ms40ms
(1),(6)
320ms (2), 640ms
On-line -
(3),
1... 4
On-line 1280ms (4), 2560ms (5), 5120ms (6) 1
Not modifiable SIB2 (0) SIB2 (0)
On-line 80ms (0), 160ms (1), 320ms (2), 640ms -
(3),
1... 4
On-line 1280ms (4), 2560ms (5), 5120ms (6) 1
Not modifiable SIB3 (1) SIB3 (1)
On-line 80ms (0), 160ms (1), 320ms (2), 640ms -
(3),
1... 4
On-line 1280ms (4), 2560ms (5), 5120ms (6) 1
On-line SIB4 (2), SIB5 (3), SIB6 (4), SIB7 (5), SIB8 -
(6),
1...16, step 1
On-line SIB10 (7), SIB11 (8), SIB12 (9) -
On-line 1...16, step 1 -
On-line -6 dB (0), -4 dB (1), -2 dB (2), 0 dB (3) -
On-line -6 dB (0), -4 dB (1), -2 dB (2), 0 dB (3) -
On-line 30s (0), 60s (1), 120s (2), 180s (3), 240s -
(4)
30s (0), 60s (1), 120s (2), 180s (3), 240s
On-line -
(4)
1...1000, step 1
BTS restart needed 10
BTS restart needed 1...100, step 1 10
Requires object locking 1... 8 1
On-line 0...15, step 1 7
On-line 1...10, step 1 1
BTS restart needed SingleTx (0), TxDiv (1) SingleTx (0)
On-line 100ms (0), 200ms (1), 300ms (2), 400ms 400ms (3)
(3),
100ms600ms (4), 1000ms
(0), 200ms (5), 1500ms
(1), 300ms (6),
(2), 400ms
On-line 2000ms (7) 400ms (3)
(3), 600ms (4),ms,
1000...16000 1000ms (5), 1500ms
step 1000 ms (6),
On-line 2000ms (7) 8000 ms
On-line 100ms (0), 200ms (1), 500ms (2), 1000ms 500ms (2)
(3),
100ms2000ms (4), 4000ms
(1), 200ms (5), 8000ms
(2), 500ms (6),
(3), 1000ms
On-line notUsed (7) 500ms (3)
(4),
50ms (0), 100ms (1), 150ms (2), 200ms
On-line 2000ms (5),(4),
4000ms (6),(5),
8000ms (7)(6) 1000ms (5)
(3),
100ms500ms
(0), 200ms1000ms
(1), 500ms 2000ms
(2), 1000ms
On-line 2000ms (4)
(3),
0ms2000ms
(0), 50ms(4),(1),
4000ms
100ms(5),
(2),8000ms (6)
200ms (3),
On-line 2000ms (6)
500ms (4), 1000ms (5), 2000ms
1000ms (0), 3000ms (1), 5000ms (2), (6)
On-line 3000ms (1)
10000ms (3), 15000ms
5min (5), 10min (10), 20min(4), 20000ms
(20), 30min (5),
On-line 30000ms (6) 180min (180)
(30), 60min
1...1800 s, step 1 s
On-line (60), 120min (120), 180min (180) 300 s
On-line 5ms (0), 10ms (1), 16ms (2), 20ms (3), 10ms (1)
32ms (4),20sf
10sf (0), 40ms (1),(5), 64ms
50sf (2), (6),
100sf80ms
(3), (7),
200sf
On-line 128ms (8), 160ms (9), 320ms (10), 640ms 20sf (1)
(4),
0sf 500sf (5), 1000sf (6), infinity (7)
On-line (11),(0), 10sf (1),
1280ms 20sf
(12), (2), 50sf
2560ms (3),infinity
(13), 100sf 0sf (0)
(4),
(14) 200sf (5), 500sf (6), 1000sf
320 ms (0), 640 ms (1), 1280 ms (2), 2560 (7)
On-line 320 ms (0)
ms
0...7(3), 51201ms
s, step s (4), 10240 ms (5)
On-line -
On-line 100...20000 ms, step 100 ms 2000 ms
On-line 0...5 us, step 0.01 us 0.52 us
On-line 500 (0), 750 (1), 1280 (2), 1920 (3), 2560 10240 (6)
(4), 5120subframes,
0...2560 (5), 10240 step
(6) 1 subframes
On-line 2000 subframes
BTS restart needed 0...65535, step 1
On-line 0...31 dB, step 1 dB -
On-line 0...62 dB, step 2 dB -
On-line 0...97 dBm, step 1 dBm -
On-line 0...97 dBm, step 1 -
On-line 0...97 dBm, step 1 dBm 33
On-line 0...97 dBm, step 1 98
On-line 0...97 dBm, step 1 dBm 35
On-line 0...97 dBm, step 1 dBm -
On-line 0...97 dBm, step 1 dBm -
On-line 0...97 dBm, step 1 dBm
On-line 0.25 (0), 0.5 (1), 0.75 (2), 1.0 (3) 0.5 (1)
On-line 0.25 (0), 0.5 (1), 0.75 (2), 1.0 (3) 0.5 (1)
On-line 5...25 %, step 0.5 % 6%
On-line 8...50 %, step 1 % 15%
On-line -10...10 dB, step 0.1 dB 1 dB
BTS restart needed 1.4 MHz (14), 3 MHz (30), 5 MHz (50), 10 MHz (100)
Requires object locking 10
MRC MHz(0), (100),
IRC (1)15 MHz (150), 20 MHz MRC (0)
(200)
0...7, step 1
BTS restart needed 0
On-line 0...50 %, step 1 % 10 %
On-line false (0), true (1) true (1)
On-line 10...500 tb, step 10 tb 30 tb
On-line 1...50, step 1 1
On-line alpha 0 (0), alpha 0.4 (1), alpha 0.5 (2), alpha 0.8 (5)
alpha 0.6 true
false (0), (3), (1)
alpha 0.7 (4), alpha 0.8 (5),
On-line alpha 0.9 (6), alpha 1 (7) false (0)
On-line -120 dBm (0), -118 dBm (1), -116 dBm (2), -96 dBm (12)
-114 dBm
-127...0 (3), step
dBm, -112 1dBm
dBm(4), -110 dBm (5),
On-line -108 dBm (6), -106 dBm (7), -104 dBm (8), -118 dBm
On-line -127...0
-102 dBmdBm,(9), step
-100 1dBm
dBm(10), -98 dBm -103 dBm
On-line (11), -96dB,
-47...80 dBm (12),
step -94 dBm (13), -92 dBm
1 dB -1 dB
(14), -90 dBm (15)
On-line -47...80 dB, step 1 dB 0 dB
On-line false (0), true (1) true (1)
On-line false (0), true (1) true (1)
On-line -6...8 dB, step 2 dB 4 dB
On-line 10...2000 ms, step 10 ms 50 ms
BTS restart needed false (0), true (1) true (1)
On-line -127...0 dBm, step 1 dBm -113 dBm
On-line -127...0 dBm, step 1 dBm -88 dBm
On-line -47...80 dB, step 1 dB 2 dB
On-line -47...80 dB, step 1 dB 20 dB
Requires object locking RoundRobinFD (0), ExhaustiveFD (1), ExhaustiveFD (1)
MixedFD
1...4, step(2)
1
On-line 2
On-line 1...100, step 1 3
On-line 16...1544, step 8 104
Requires object locking channel unaware (0), channel aware (1), channel unaware (0)
interference
0... 10 dB aware (2)
On-line 10
On-line 0...80 characters -
VF Default Shared Default (VF) Shared Default (O2)
5 5 5
5 5 5
5 5 5
12 12 12
interSubFrame (0) interSubFrame (0) interSubFrame (0)
- - -
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
31 31 31
60 60 60
85 85 85
80% 80% 80%
1 (1000) 1 (1000) 1 (1000)
50 50 50
75 75 75
50% 50% 50%
0 0 0
0 0 0
200 ms 200 ms 200 ms
10 s 10 s 10 s
4 4 4
5 5 5
10 10 10
allowed (0) allowed (0) allowed (0)
true (1) true (1) true (1)
- - -
- - -
medium (1) medium (1) medium (1)
-10 -10 -10
170000 kbps 170000 kbps 170000 kbps
60000 kbps 60000 kbps 60000 kbps
0.12 0.12 0.12
0.12 0.12 0.12
0.12 0.12 0.12
0.26 0.26 0.26
75 75 75
3 3 3
600 600 600
300 300 300
20 20 20
100 100 100
300 300 300
440 420 420
14 14 14
14 14 14
OaM (1) OaM (1) OaM (1)
cpichRSCP (0) cpichRSCP (0) cpichRSCP (0)
cpichEcN0 (1) cpichEcN0 (1) cpichEcN0 (1)
7 7 7
8 8 8
1.4 1.4 1.4
1.6 1.6 1.6
7 7 7
8 8 8
1.4 1.4 1.4
1.6 1.6 1.6
30 kbps 30 kbps 30 kbps
30 kbps 30 kbps 30 kbps
- - -
- - -
- - -
8 8 8
8 8 8
30s (0) 30s (0) 30s (0)
30s (0) 30s (0) 30s (0)
2 (0) 2 (0) 2 (0)
18 18 18
n10 (6) n10 (6) n10 (6)
n1 (0) n1 (0) n1 (0)
2 2 2
0dB (15) 0dB (15) 0dB (15)
- - -
-100 dBm -100 dBm -100 dBm
-80 dBm -80 dBm -80 dBm
43.0 (430) 43.0 (430) 43.0 (430)
- - -
23 dBm (23) 23 dBm (23) 23 dBm (23)
quarterT (4) quarterT (4) quarterT (4)
4 (2) 4 (2) 4 (2)
4 4 4
4 4 4
4 4 4
4 4 4
4 4 4
0.8 0.8 0.8
-5 -5 -5
1% 1% 1%
0.5 0.5 0.5
wideband (0) wideband (0) wideband (0)
false false false
periodicIntraFreq (0) periodicIntraFreq (0) periodicIntraFreq (0)
32 (1) 32 (1) 32 (1)
10240ms (8) 10240ms (8) 10240ms (8)
Normal (0) Normal (0) Normal (0)
N = 1/6 (0) N = 1/6 (0) N = 1/6 (0)
- - -
12 12 12
3 3 3
41 41 41
false false false
2dB (1) 2dB (1) 2dB (1)
10 (6) 10 (6) 10 (6)
Please read comments Please read comments Reserved (1)
- - -
151 (151) 151 (151) 151 (151)
0 0 0
- - -
1 1 1
0 0 0
0 0 0
10 10 10
8 8 8
10 10 10
1 dB 1 dB 1 dB
- - -
Not Used(18) Not Used(18) Not Used(18)
-120 dBm -120 dBm -120 dBm
-120 dBm -120 dBm -120 dBm
64ms (7) 64ms (7) 64ms (7)
5 5 5
10 dB (4) 10 dB (4) 10 dB (4)
40 (9) 40 (9) 40 (9)
32 (7) 32 (7) 32 (7)
10 (7) 10 (7) 10 (7)
5 5 5
144 bits (1) 144 bits (1) 144 bits (1)
1.03 1.03 1.03
1.02 1.02 1.02
false false false
false false false
false false false
50 PRB 50 PRB 50 PRB
25 PRB 25 PRB 25 PRB
1 PRB 1 PRB 1 PRB
false false false
true (1) true (1) true (1)
1 (0) 1 (0) 1 (0)
-1 -1 -1
- - -
480ms (9) 480ms (9) 480ms (9)
15 dB 15 dB 15 dB
-19 dB -19 dB -19 dB
- - -
- - -
50 dB 50 dB 50 dB
- - -
- - -
10 dB 10 dB 10 dB
10ms (3) 10ms (3) 10ms (3)
160ms (1) 160ms (1) 160ms (1)
1 1 1
SIB2 (0) SIB2 (0) SIB2 (0)
160ms (1) 160ms (1) 160ms (1)
1 1 1
SIB3 (1) SIB3 (1) SIB3 (1)
160ms (1) 160ms (1) 160ms (1)
1 1 1
- - -
- - -
- - -
- - -
- - -
- - -
- - -
10 10 10
10 10 10
1 1 1
7 7 7
1 1 1
TxDiv (1) TxDiv (1) TxDiv (1)
400ms (3) 400ms (3) 400ms (3)
400ms (3) 400ms (3) 400ms (3)
8000 ms 8000 ms 8000 ms
500ms (2) 500ms (2) 500ms (2)
500ms (3) 500ms (3) 500ms (3)
1000ms (5) 1000ms (5) 1000ms (5)
2000ms (4) 2000ms (4) 2000ms (4)
2000ms (6) 2000ms (6) 2000ms (6)
3000ms (1) 3000ms (1) 3000ms (1)
180min (180) 180min (180) 180min (180)
300 s 300 s 300 s
10ms (1) 10ms (1) 10ms (1)
20sf (1) 20sf (1) 20sf (1)
0sf (0) 0sf (0) 0sf (0)
320 ms (0) 320 ms (0) 320 ms (0)
2s 2s 2s
2000 ms 2000 ms 2000 ms
0.52 us 0.52 us 0.52 us
10240 (6) 10240 (6) 10240 (6)
2000 subframes 2000 subframes 2000 subframes
- - -
- - -
4 dB 4 dB 4 dB
90 90 90
0 0 0
Not Used (98) Not Used (98) Not Used (98)
0 0 0
85 dBm 85 dBm 85 dBm
26 dBm 26 dBm 26 dBm
28 dBm 28 dBm 28 dBm
24 24 24
1.0 (3) 1.0 (3) 1.0 (3)
1.0 (3) 1.0 (3) 1.0 (3)
6% 6% 6%
15% 15% 15%
1 dB 1 dB 1 dB
10 MHz (100) 10 MHz (100) 10 MHz (100)
MRC (0) MRC (0) MRC (0)
0 0 0
10 % 10 % 10 %
true (1) true (1) true (1)
30 tb 30 tb 30 tb
1 1 1
alpha 0.8 (5) alpha 0.8 (5) alpha 0.8 (5)
true (1) true (1) true (1)
-96 dBm (12) -96 dBm (12) -96 dBm (12)
-118 dBm -118 dBm -118 dBm
-103 dBm -103 dBm -103 dBm
-1 dB -1 dB -1 dB
0 dB 0 dB 0 dB
true (1) true (1) true (1)
true (1) true (1) true (1)
4 dB 4 dB 4 dB
50 ms 50 ms 50 ms
false (0) false (0) false (0)
-113 dBm -113 dBm -113 dBm
-88 dBm -88 dBm -88 dBm
2 dB 2 dB 2 dB
20 dB 20 dB 20 dB
MixedFD (2) MixedFD (2) MixedFD (2)
2 2 2
3 3 3
104 104 104
interference aware (2) interference aware (2) interference aware (2)
10 10 10
- - -
Parameter relationships Related features Change Control
If adjWInfList is not empty then LTE56 Inter RAT handover to WCDMA (optional), Draft Version A
a1TimeToTriggerDeactInterMeas must
The parameter is mandatory required if be LTE55
LTE442Inter-frequency handover
Network Assisted (optional),
Cell Change to GSM Draft Version A
0ms...5120ms.
adjGInfList is not empty. LTE442 Network Assisted Cell Change to GSM
(optional)
ifIf actIfHo is enabled then
adjGInfList is not empty then LTE55 Inter-frequency
(optional) handover (optional) Draft Version A
a2TimeToTriggerActInterFreqMeas
a1TimeToTriggerDeactInterMeas
If adjWInfList is not empty then must shall
bebe 0 LTE56 Inter RAT handover to WCDMA (optional) Draft Version A
(0ms)...15
0ms...5120ms. (5120ms)
a2TimeToTriggerActWcdmaMeas must be
ifif0ms...5120ms.
actIfHo
actIfHo is
is disabled
'enabled' then
then LTE761 Advanced target cell selection and Draft Version B
a2TimeToTriggerActInterFreqMeas
a1TimeToTriggerDeactInterMeas must be shall not be handover retry for intra frequency handover
Draft Version A
specified
0ms...5120ms.(special value 16 (notUsed) used (optional), LTE423 RRC connection release with
instead) redirect (standard) Draft Version A
Draft Version A
Draft Version A
Draft Version A
If at least one bit of acBarAC AC 11 ... AC 15 is Draft Version C
set to '1', probFac must be configured to '0%'.
Draft Version A
Only if all bits of acBarAC AC 11 ... AC 15 are
If
set atto least one bit ofcan
'0', probFac acBarAC
be configuredAC 11 ...toAC any15 is Draft Version A
set
If atto
value. '1', probFac
least one bit ofmust acBarAC be configured
AC 11 ... to AC'0%'.15 is Draft Version C
Only
set toif'1', all probFac
bits of acBarAC must beAC 11 ... ACto
configured 15'0%'.
are
set Draft Version A
Onlytoif'0', all probFac
bits of acBarAC can be configured
AC 11 ... AC to 15anyare
value.
If
set atto least one bit ofcan
'0', probFac acBarAC
be configuredAC 11 ...toAC any15 is Draft Version A
set
If at least one bit of acBarAC AC 11 ... AC'0%'.
value. to '1', probFac must be configured to 15 is Draft Version C
Only
set toif'1', all probFac
bits of acBarAC must beAC 11 ... ACto
configured 15'0%'.
are
set to '0', probFac can be configured to any Draft Version A
Only if all bits of acBarAC AC 11 ... AC 15 are
value.
If
set atto least one bit ofcan
'0', probFac acBarAC
be configuredAC 11 ...toAC any15 is Draft Version A
set
If atto
value. '1', probFac
least one bit ofmust ocAcBarACbe configured AC 11 to ... '0%'.
AC Draft Version C
Only
15 is ifset alltobits '1',ofocAcProbFac
acBarAC ACmust 11 ...be AC 15 are
set to '0', probFac Draft Version A
configured to '0%'.can be configured to any
value.
If
Only if all bits of at least one bitocAcBarAC
of ocAcBarAC ACAC 11 ... 11AC ... AC
15 Draft Version A
15
are issetset to
If at least one bit of sigAcBarAC AC 11 ... AC to '1',
'0', ocAcProbFac
ocAcProbFac canmust be be
configured Draft Version C
configured
to any
15 is set value.to to'1','0%'.
sigAcProbFac must be
Only if all bits of ocAcBarAC AC 11 ... AC 15 Draft Version A
configured to '0%'.
are
If
Only at set
least to one
if all '0', ocAcProbFac
bits bitsigAcBarAC
of of sigAcBarAC can ACbe AC11configured
11AC
... ... AC
15 Draft Version A
to
15
are set to '0', sigAcProbFac any
is value.
set to '1', sigAcProbFac must be
dlsOldtcTarget is applicable can only be configured
if actDlsOldtc LTE10 EPS bearers for conversational voice Draft Version A
configured
to
is set anytovalue. to '0%'.
'true', otherwise the the default value (standard)
Only if all bits of sigAcBarAC AC 11 ... AC 15 LTE10 EPS bearers for conversational voice Draft Version A
is used (standard)
are set must
actDrx to '0',be sigAcProbFac
set to 'false' can be configured LTE42 DRX in RRC connected mode (standard) Draft Version A
to
-If ifactFastMimoSwitch any value.is set to 'true' and additionally
riEnable is set to 'true' following LTE568 DL adaptive closed loop MIMO (4x2) Draft Version A
riPerOffset
conditions is nottoset
need be tofulfilled:
'-1' (optional)
actLdPdcch or can be set to 'true' only if following LTE616 Usage based PDCCH adaptation Draft Version A
-conditions riPerOffset are must be configured to '-1'
fulfilled (standard)
--ULAMC_INI_MCS ifriPerM
riEnable must is be
set tocan'true'
configured be and toadditionally
located '1' only LTE829 Increased uplink MCS range (standard), Draft Version A
-between
riPerM phichDur is not
MCS0is set to
and 'Normal'
'1'
MCS20, ANDMCS21 to LTE788
-- riEnable
The parameter
maxNrSymPdcch must be configured
actOlLaPdcch
isapplicable
greater than to
can 'true'.
be
1 AND set to LTE1035Support of 16QAM
Outer loop in UL (optional)
link adaptation for PDCCH Draft Version A
MCS24 shall not be even if
-'true'
If dlChBw only if
is dlOlqcEnable
configured
actOtdoa set to 'true'set is
greater set
siWindowLen to
than 'true'.
'5MHz' If (standard)
actModulationSchemeUL
if actFastMimoSwitch
dlOlqcEnable is set to 'false', = "16QAMHighMCS"
to 'false' andmust be
actOlLaPdcch
- Draft Version A
set
dlMimoMode
If
must
If
appropriately be set tois
numOfTxPorts
actLdPdcch set
'false'.
is set
depending
to
is set to'Closed
'false',
on the
Loop Mimo'UL
to '1', actPrsTxDiv
configured
individual PRS
or
must - Draft Version A
'Closed
be
and Loop
DL split of PDCCH MIMO (4x2)',resources
If
configuration. actRepeaterMode is set to 'Coupled' or LTE72 4-way RX diversity Draft Version A
set
If
(pdcchUlDlBal) - actOlLaPdcch
mimoClCqiThD,
to 'false'.repeaterDelay is mimoClCqiThU,
isfixed
set toused. 'false',
'Dedicated'
For
actSmartDrx details on appropriate
can only is benot is mandatory
values
configured pleaseto refer
'true' if LTE1195-e FHCC
LTE585 Smart DRXRepeater Interface Module -
(optional)
mimoClRiThD and Draft Version A
actPrsTxDiv
pdcchHarqTargetBler
If
required.
to actLdPdcch is is setmimoClRiThU
mandatory to 'true', required
determined,
UL and must
if DL be
actOtdoa
theset,
split of Info model update and merge for RL40
actDrx
otherwise
is
default
Note: is
value
Only set
the
on to
is 'true.
default
used
FSMr3 value
instead. is
actSuperCell used can be LTE1542 FDD Supercell (standard)
PDCCH
Note:
parameter resources
siWindowLen. may be adjusted runtime Draft Version A
set
configured to 'true'. to
based
In
If actOtdoa
actTtiBundling
The case on
following load is 'true'.
actRepeaterModeand
set
cantobe
condition the
'true' configured
issetnot
is following
only toset
applicable value
conditions
'true' onlyif if LTE907 TTI bundling (optional) Draft Version A
(pdcchUlDlBal) is set to 'true':is set to value point
to
need
actUlLnkAdp 'Coupled', even
is defines
set if
to four the initial
antenna
'eUlLa'. starting
lines LTE116
actSmartDrx
If
then.
with parameter actUlLnkAdp LTE1034Cell Bandwidth
Extended - 3 Link
Uplink MHzAdaptation
(optional)
Draft Version A
-to
'eUlLa', beRX usage are defined in the
fulfilled:
drxProfile1-drxProfilePriority
thefor parameter must be greater
eUlLaAtbPeriod, LTE117 Cell
(standard) Bandwidth - 1,4 MHz (standard)
resourceList
-The range
drxProfile2-drxOnDuratT
than drxSmartProfile2-drxProfilePriority 4addAUeRrHo
RX reception must(LTE72
depends 4Rx
be greater on LTE20 Admission control (optional), LTE458 RL20 Draft Version A
eUlLaBlerAveWin,
MRC
dlChBw, andulChBw LTE980 andeUlLaDeltaMcs,
4RxactFlexBbUsage
IRC) depends
is not supported. Capacity and Dimensioning (standard)
than
The 3
range for addAUeTcHo on LTE20 Admission control (optional), LTE458 RL20 Draft Version A
eUlLaLowMcsThr, eUlLaLowPrbThr and
-according
dlChBw, to following
drxProfile3-drxOnDuratT
ulChBw conditions
must
andonactFlexBbUsage be greater Capacity andemergency
Dimensioning (standard)
eUlLaPrbIncDecFactor
(1)
(1.1) Range
if depends
actFlexBbUsage must
dlChBw
set tobe specified.
value
'false' as LTE572 IMS sessions (standard) Draft Version A
than 3
according to following conditions
follows:
and
-(1.1) following
LNCEL-maxGbrTrafficLimit parameter are mandatory
+ max(LNCEL- required: LTE497 Smart admission control
If if actFlexBbUsage
parameter setisto 'false' Draft Version A
--addGbr-
prsPowerBoost, ifmin(ulChBw,dlChBw)
dlChBw isactUlLnkAdp
setprsConfigurationIndex,
to '5.0isMHz' set
'5 MHz',or to value
and
'eUlLa', the parameter redBwMinRbUl
LNCEL-maxGbrTrafficLimit
'10.0
addAUeRrHo
prsBandwidth,
TrafficRrHo,
-must
MHz',
min(ulChBw,dlChBw)
addEmergencySessions
value range
LNCEL-addGbrTrafficTcHo)
+ restricted must
max(LNCEL-
'5isMHz',
is480 to must be LTE497 Smart admission control Draft Version A
smaller
addGbr-
0...480 be orlessequal or thanoneUlLaLowPrbThr.
equal to
(1)
prsNumDlFrames,
be
addAUeTcHo Range dependsvalue dlChBw
actPrsTxDiv
rangeMHz' value
is restricted as
to must LTE113 Cell Bandwidth - 15 MHz (standard), LTE7 Draft Version A
-TrafficRrHo,
-(1)
follows:
actOtdoa
equal ifmin(ulChBw,dlChBw)
dlChBwor less can isLNCEL-addGbrTrafficTcHo)
set
onlyto90
than be'15.0 is '10
set to 'true' or if
MHz', Support of multiple EPS-bearer (standard),
0...480
be
'20.0 Range
MHz', is depends on
addEmergencySessions dlChBw value as LTE113 Cell Bandwidth 15 MHz (standard), LTE7 Draft Version A
-addAUeRrHo
-(1)
follows: ifmin(ulChBw,dlChBw)
dlChBw
gpsInUse value
set to '5rangeMHz'
'true' isor
AND
is840
'10 restricted
'10
MHz', to LTE458
Support RL20
of Capacity
multiple EPSand Dimensioning
bearer (standard),
equal
must
0...480
MHz', or
be
Range less
less than
or
depends
addNumDrbRadioReasHo equal90ontodlChBw value
must asbe LTE113 Cell
(standard) Bandwidth - 15 MHz (standard), LTE7 Draft Version A
--addAUeTcHobtsSyncMode
if dlChBw is set is
value set
to '5 to
range 'PhaseSync'.
MHz'isor restricted
'10 to LTE458
(2)
follows:
-MHz',
smaller addEmergencySessions
min(ulChBw,dlChBw)
or equal than 2400 is '15mightMHz',must Support RL20 Capacity
of multiple EPSand Dimensioning
bearer (standard),
0...480 addNumDrbTimeCriticalHo (standard)
-restrictif dlChBw
addAUeRrHo or will is setbe
value restricted
to '5.0
range
'15 MHz',
MHz' byrestricted
is or '20 to LTE458 RL20 Capacity and Dimensioning
-addNumQci1DrbRadioReasHo
be min(ulChBw,dlChBw)
smaller or equal
maxNumRrcEmergency than is '15
2400 MHz',
0...840
MHz', addNumDrbRadioReasHo mustmustbeto be (standard)
-addAUeTcHo
due
less if dlChBw
to is
or calculations
equal value
set
to 200 to range
'15
needed MHz' is restricted
or '20
-MHz',min(ulChBw,dlChBw)
smaller
0...840 or equal than is
4200 '20 MHz',
for
-(2) this
if dlChBw addNumDrbTimeCriticalHo
parameter is set to '10.0 MHz', must
addAUeRrHoaddNumDrbRadioReasHo
-addNumQci1DrbRadioReasHo
min(ulChBw,dlChBw) value range is4200is restricted
'20 might to
MHz',
be
(2.1) smaller
if or equal
actIMSEmerSessR9 than is setmust be
0...840
restrict
addAUeTcHo or will be value restricted
range is byrestricted
maxNum- to
(2)
to
less addNumDrbTimeCriticalHo
'true'
or following
equal to 400condition need to be fulfilled
(1.2)
Rrc
0...840 if actFlexBbUsage
and/or maxNumRrcEmergency set to 'true', due
might
-toif dlChBwrestrict
maxNumRrcEmergency is or
set will
to be restricted
'15.0 >=
MHz', max- by max-
addAUeRrHo
calculationsvalue needed range is restricted
for those parameter to
(1) Range depends on dlChBw value as LTE113 Cell Bandwidth - 15 MHz (standard), LTE7 Draft Version A
follows: Support of multiple
LTE39 System EPS bearer
information (standard),
broadcast (optional) Draft Version A
- if dlChBw is set to '5.0 MHz', LTE458 RL20 Capacity and Dimensioning
administrativeState
addNumQci1DrbTimeCriticalHo can be set tomust 'shutting
be LTE145 LTE Configuration Management
(standard) Draft Version A
down'
less oronly
anrUtraRscpThresequalif enableGrflShdn
to 200is mandatory is set to
required if (optional),
LTE908 ANR LTE914 Graceful
Inter-RAT UTRANcell shut down
- Fully UE Based Draft Version A
'Enabled',
if dlChBwotherwise
-actUeBasedAnrUtranis there
is set to '10.0 are
MHz',
set no limitations for
to 'true'. (optional)
(optional)
administrativeState
addNumQci1DrbTimeCriticalHo setting must be LTE473 Extended DRX settings (standard) Draft Version A
less or equal to 400 Draft Version A
- if dlChBw is set to '15.0 MHz',
Draft Version A
addNumQci1DrbTimeCriticalHo must be
less or equal to 500 Draft Version A
- if dlChBw is set to '20.0 MHz', Draft Version A
addNumQci1DrbTimeCriticalHo must be
The
less value or equalof blankedPucch
to 600 must be less than LTE786-a Reduced Uplink Bandwidth (optional) Draft Version A
nCqiRb
(2) and used in calculation
addNumQci1DrbTimeCriticalHo
no relations of LTE786 Flexible UL Bandwidth (optional)
Draft Version A
MaxPucchResourceSize
might restrict or will be restricted (calculation in
by max- LTE116 Cell Bandwidth - 3 MHz (optional)
no relations
nCqiRb). LTE117 Cell Bandwidth - 1,4 MHz (standard) Draft Version A
NumRrc and/or maxNumRrcEmergency
due to calculations needed for those LTE49 Paging (optional), LTE39 System Draft Version A
parameter
cellCapClass is mandatory required if information
- broadcast (optional)
Draft Version A
(2.1) if actEnhAcAndGbrServices
actIntraFreqLoadBal is set to 'true'.is
set to 'false' and actConvVoice is set to LTE971 Intra-LTE mobility offsets (standard) Draft Version A
'true' following condition need to be fulfilled Draft Version A
- maxNumRrc + max(addAUeRrHo,
cellReSelPrio must be unequal to the setting of LTE39 System information broadcast (optional) Draft Version A
addAUeTcHo) >= maxNumQci1Drb +
- uCelResPrio in each UFFIM instance, LTE502 Cell Outage triggered reset (standard)
max(addNumQci1DrbRadioReasHo, Draft Version A
- gCelResPrio in each GNFL instance,
addNumQci1DrbTimeCriticalHo) Draft Version A
- hrpdCResPrio in each CDFIM instance,
(2.2) if additionally
- rttCResPrio in each CDFIM instance Draft Version A
actIMSEmerSessR9 is set to 'true'
-no maxNumRrcEmergency
relations >= LTE41 PDCP, MAC & RLC support (optional), Draft Version A
maxNumQci1Drb + max(addEmergency- LTE10 EPS bearers for conversational voice
-Sessions, - Draft Version A
(standard)
addNumQci1DrbRadioReasHo, Draft Version A
addNumQci1DrbTimeCriticalHo) LTE959 (standard) Draft Version A
Recommendation if
In case riEnable is set
actIMSEmerSessR9 is to
set'true' AND riPerM is
to 'true': Draft Version A
set to 1, cqiPerNp
-If addEmergencySessions cannot
periodicCqiFeedbackType is set be set
should toto1 (5ms). LTE31-c Periodic CQI reception for Trial Phase 3 Draft Version A
be configured cqiPerSbCycK
'UE_selected' to a greater value than
is mandatory (standard)
addNumQci1DrbRadioReasHo LTE31-c Periodic CQI reception for Trial Phase 3 Draft Version A
required. (standard)
- (maxNumQci1Drb + Draft Version A
addNumQci1DrbRadioReasHo) should
Draft Version A
be half or less than (maxNumActDrb +
addNumDrbRadioReasHo), because Draft Version A
every GBR-DRB is also counted as Draft Version A
normal DRB and each GBR-DRB has 1
default DRB (nGBR) Draft Version A
no relations LTE41 PDCP, MAC & RLC support (optional), Draft Version A
The product of parameter modPeriodCoeff and LTE10
LTE39 EPS bearers
System for conversational
information voice
broadcast (optional), Draft Version A
defPagCyc (standard)
deltaMargin(given in rf) must
is mandatory not exceed
required if 1024 LTE49
- Paging (optional)
Draft Version A
actIntraFreqLoadBal is set to 'true'. LTE27 Open loop UL power control and DL power Draft Version A
if n1PucchAn is set to 10 than deltaPucchShift setting (optional)& transport channels (optional)
LTE40 Physical Draft Version A
must be set to 1 LTE27 Open loop UL power control and DL power Draft Version A
If dl64QamEnable is set to 'false', the highest setting (optional)of 64 QAM in DL (optional)
LTE43 Support Draft Version A
possible
The maximal valuecell
forpower
iniMcsDl is 16.
reduction LTE27 Open loop UL power control and DL power Draft Version A
If enableDl16Qam
(dlCellPwrRed) parameter
depends on depends theis set to 'false',
configured setting (optional),
(1)
dl64QamEnable maxNumRrcEmergency must be set toas 'false'.on the LTE40 Physical & LTE1106
transport Flexi low power RRH
channels Draft Version A
maximal
configured output power
dlChBwisvalue (pMax) 850 2TX forLTE113
opticalCell
repeater interface
- 15(standard)
If
follows dl64QamEnable set toas'true',
follows: (optional), Bandwidth
LTE819 DL inter-cell interference generation Draft Version A
-enableDl16Qam
if dlChBw is set must to '5.0beMHz',
set to 'true'. MHz (standard), LTE106 6 cell support
(standard)
-maxNumRrcEmergency
for pMax set to 49.0 dBm, must dlCellPwrRed
be less or equal LTE819
with oneDL inter-cell
System interference
Module (standard),generation Draft Version A
maximum
to 480 value is 10.0 dB (standard)
LTE1072DL Flexi Lite BTS 750 (standard),
enableDl16Qam
-- for pMax set must
to 47.8 be
dBm, set to 'true' before
dlCellPwrRed LTE819 inter-cell interference generation Draft Version A
if dlChBw is set
dlInterferenceModulation to '10.0 MHz',
is allowed to be set LTE179-a
(standard) CRL0665 Dual band operation
ifmaximumdlMimoMode
maxNumRrcEmergency valueisisset 9.5todB‘Dynamic
must Open
be less or equal LTE703
with oneDownlink adaptive
System Module closed loop
- 6*10Mhz Draft Version A
to
-If
Loop for'16QAM'
pMax
MIMO’, formimoOlCqiThD
set Interference
to 46.0 dBm, Generation
dlCellPwrRed
must be MIMO forSimplified
two antennas (optional), LTE70
to 480
dlOlqcEnable
dl64QamEnable ismust
set tobe 'false',
set to dlTargetBler
'true' before (optional)
LTE31-b BLER based Link Adaptation Draft Version A
maximum
set, value
otherwise the istodefault
7.7 dBandvalue
- if dlChBw
shall not be isdetermined
dlInterferenceModulation set '15.0 MHz',the isdefault
is allowed
used value
to be set
DL MIMO
(optional)
LTE5 Radio
(optional),
bearer
LTE69 Transmit
and S1(optional),
bearer establishment
if-is for pMax
dlMimoMode set tois44.8set to dBm, dlCellPwrRed
‘Dynamic diversity for two antennas Draft Version A
maxNumRrcEmergency
to used
'64QAM'instead.
for Interference must be
Generationless or equal
maximum and release (optional)
to 840Loopvalue
Open MIMO’, is 6.5 dB
mimoOlCqiThU must LTE187
LTE430 Single
DL TX boosting
power path mode for(optional)
control channels Draft Version A
-If
- for
be pMax
set,
ifdlOlqcEnable
dlChBw set
otherwise tois43.0
is set the
to dBm,
default
'20.0 dlCellPwrRed
MHz', value is (standard)
set to 'false', LTE430 DL power boosting for control channels Draft Version A
maximum
used value
maxNumRrcEmergencyshall is 4.7 dB mustnot bebe less or equal
dlOlqcDeltaCqiStepUp determined (standard)
if-and
tofor 840pMax
dlMimoMode
the set tois
default 41.8
set to
value dBm,
is useddlCellPwrRed
‘Dynamic instead.
maximum
Open Loopvalue
MIMO’, is 3.5 dB
mimoOlRiThD must
-If
be for pMax
set, set tois40.0
otherwise the dBm, dlCellPwrRed
(2) addEmergencySessions
dlOlqcEnable set default
to value is on
depends
'false',
maximum
used
dlChBw value value asisfollows:
1.7 dB
dlolqcDeltaCqiIni shall not be determined and
if-the
- for pMax set
ifdlMimoMode
dlChBw
default tois39.0
is set
value setused
to
is to
'5.0dBm, dlCellPwrRed
‘Dynamic
MHz',
instead.
maximum
Open Loop value
MIMO’, is
addEmergencySessions must be less0.7 dB
mimoOlRiThU mustor equal
-If
tofor
be 480pMax
set, set tois37.0
otherwise
dlOlqcEnable the dBm,
set default
to dlCellPwrRed
'false',value is
maximum value is 0.0 dB
used
If dlpcMimoComp is set to '3dB', dlRsBoost LTE430 DL power boosting for control channels Draft Version A
must be smallerisorset
If dlOlqcEnable equal than the
to 'true', '3dB'.
specified (standard)
LTE31-b Simplified BLER based Link Adaptation Draft Version A
If dlRsBoost is different to '0 dB',
dlTargetBler will be used, in all other cases the (optional)
dlpcMimoComp is restricted toby'0 dB' LTE31-b Simplified BLER based Link Adaptation Draft Version A
default value is used implicitly BTSand
SW.'3 (optional)
dB'.
iniMcsDl
If pdcchHarqTargetBler is greater than 1%,is
is applicable only if dlamcEnable LTE31-b Simplified BLER based Link Adaptation Draft Version A
set to 'false'. value
dlTargetBler
dlpcMimoComp dlOlqcEnable be must
shallused
isisnot at least betwice
set toof (optional)
If numOfTxPorts
'false' in this case
pdcchHarqTargetBler. inset to '1',indlRsBoost
addition.
case can LTE27 Open loop UL power control and DL power Draft Version A
dlMimoMode is set to
not be configured to '1.77dB'.'Single TX' setting (optional), LTE430 DL power boosting for
Draft Version A
dlpcMimoComp can be set to '0 dB' and '3 dB' control channels (standard)
only, when dlRsBoost is different to '0dB' LTE7 Support of multiple EPS bearer (standard) Draft Version A
If actDlsOldtc is set to 'false', dlsOldtcTarget is LTE10 EPS bearers for conversational voice Draft Version A
not applicable and the default value shall be (standard)
d PBCH used used
(2) implicitly. Draft Version A
LTE42 DRX in RRC connected mode (standard) Draft Version A
Draft Version A
the drxProfilePriority of drxProfile1 must be Draft Version A
greater than drxProfilePriority in drxProfile4
Draft Version A
and drxProfilePriority in drxProfile5
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
the drxProfilePriority (drxProfile2) must be Draft Version A
greater than drxProfilePriority (drxProfile4) and
Draft Version A
drxProfilePriority (drxProfile5)
Draft Version A
if taTimer is smaller than 1280, drxLongCycle Draft Version A
must be set to 40
Draft Version A
Draft Version A
the drxProfilePriority (drxProfile3) must be Draft Version A
greater than drxProfilePriority (drxProfile4) and
Draft Version A
drxProfilePriority (drxProfile5)
drxInactivityT depends on drxLongCycle (in Draft Version E
drxProfile4)
drxInactivityT depends on drxLongCycle Draft Version A
-(in
if drxLongCycle
drxProfile4) is set to 320, then
drxInactivityT must Draft Version D
- if drxLongCycle is be
setequal or greater than
to 320,
500
then drxInactivityT must be equal or Draft Version A
greater than 500
drxProfilePriority(drxProfile4) must be less Draft Version A
than min(drxProfilePriority(drxProfile1),
Draft Version A
drxProfilePriority(drxProfile2),
drxInactivityT depends on drxLongCycle (in
drxProfilePriority(drxProfile3)) Draft Version A
drxProfile5)
drxInactivityT depends on drxLongCycle (in Draft Version A
-drxProfile5)
if drxLongCycle is set to 1280, then
drxInactivityT must Draft Version D
- if drxLongCycle is be
setequal or greater
to 1280, then than
1280
drxInactivityT must be equal or greater than Draft Version A
-1280
if drxLongCycle is set to 2560, then
the drxProfilePriority
drxInactivityT must bedrxProfile5 must be lower Draft Version A
- if drxLongCycle
than any any other setset to 2560
is drxProfileX
to 2560, then
(X=1,2,3,4)in
drxInactivityT must bei.e.set to 2560 Draft Version A
the LNCEL instance,
drxProfile5-drxProfilePriority < min(drxProfile1- LTE585 Smart DRX (optional) Draft Version A
drxProfilePriority, drxProfile2-drxProfilePriority,
drxProfile3-drxProfilePriority, drxProfile4-
drxProfilePriority)
smartStInactFactor*drxShortCycle must be LTE585 Smart DRX (optional) Draft Version A
greater than or is
(1) If actOtdoa equal to'true'
set to max(200ms,
drxOnDuratT LTE585 Smart DRX (optional) Draft Version A
drxLongCycle).
must be greater than 3. LTE585 Smart DRX (optional) Draft Version A
drxSmartProfile2-drxProfilePriority
(2) If drxOnDuratT is less than cqiPerNp must LTE585 Smart DRX (optional) Draft Version A
greater
(calculationthanindrxSmartProfile3-
cqiPerNp) LTE585 Smart DRX (optional) Draft Version A
drxProfilePriority.
- 12*drxShortCycle must be less than 1000ms.
(1) If drxOnDuratT is less than cqiPerNp LTE585 Smart DRX (optional) Draft Version A
(calculation
If
(3)actSmartDrx in cqiPerNp)
If drxOnDuratT is set
is to 'true' in
greater addition
than or equal to LTE585 Smart DRX (optional) Draft Version A
-following
12*drxShortCycle
cqiPerNp condition
(calculationmust
needin bebe
to less than 1000ms.
fulfilled:
cqiPerNp)
smartStInactFactor*drxShortCycle
drxSmartProfile2-drxProfilePriority must be
must be LTE585 Smart DRX (optional) Draft Version A
-greater
ceil(drxOnDuratT/cqiPerNp)*floor
(2)
lessIf than or
drxOnDuratT equal
is to max(200ms,
greater than
than drxProfile1-drxProfilePriority. or equal to LTE585 Smart DRX (optional)
(1000ms/drxShortCycle) must be greater than Draft Version A
drxLongCycle).
cqiPerNp (calculation in cqiPerNp)
or equal to 12.
smartStInactFactor*drxShortCycle
- ceil(drxOnDuratT/cqiPerNp)*floor must be LTE585 Smart DRX (optional) Draft Version A
greater
(1) than or is
If actOtdoa equal
(1000ms/drxShortCycle) to'true'
set to max(200ms,
mustdrxOnDuratT
be greater than LTE585 Smart DRX (optional) Draft Version A
drxLongCycle).
or equal to 12.
must be greater than 3. LTE585 Smart DRX (optional) Draft Version A
drxSmartProfile3-drxProfilePriority
(3)
(2) smartStInactFactor*drxShortCycle
If drxOnDuratT is less than cqiPerNp must be be
must LTE585 Smart DRX (optional) Draft Version A
less
greater than
(calculation drxSmartProfile2-drxProfilePriority
thaninorcqiPerNp)
equal to max(200ms, LTE585 Smart DRX (optional) Draft Version A
and greater than drxSmartProfile4-
drxLongCycle).
- 12*drxShortCycle must be less than 1000ms.
(1) If drxOnDuratT is less than cqiPerNp
drxProfilePriority. LTE585 Smart DRX (optional) Draft Version A
(calculation in cqiPerNp)
(3) If drxOnDuratT is greater than or equal to LTE585 Smart DRX (optional) Draft Version A
-cqiPerNp
12*drxShortCycle must
(calculation be less than 1000ms.
in cqiPerNp)
smartStInactFactor*drxShortCycle must be LTE585 Smart DRX (optional) Draft Version A
-greater
ceil(drxOnDuratT/cqiPerNp)*floor
(2) If than or equal
drxOnDuratT is to max(200ms,
greater than or equalthan
to LTE585 Smart DRX (optional)
(1000ms/drxShortCycle) must be greater Draft Version A
drxLongCycle).
cqiPerNp (calculation in cqiPerNp)
or equal to 12.
smartStInactFactor*drxShortCycle
- ceil(drxOnDuratT/cqiPerNp)*floor must be LTE585 Smart DRX (optional) Draft Version A
greater
(1) than or equal
(1000ms/drxShortCycle)
If drxOnDuratT to max(200ms,
is less must
than be greater than
cqiPerNp LTE585 Smart DRX (optional) Draft Version A
drxLongCycle).
or equal to 12.
(calculation in cqiPerNp) LTE585 Smart DRX (optional) Draft Version B
- 12*drxShortCycle must be less than 1000ms.
drxSmartProfile4-drxProfilePriority
(3) smartStInactFactor*drxShortCycle must be be
must LTE585 Smart DRX (optional) Draft Version A
less
(2) Ifthan
greater drxSmartProfile3-drxProfilePriority
than or equal
drxOnDuratT to max(200ms,
is greater than or equal to LTE585 Smart DRX (optional) Draft Version A
and greater
drxLongCycle).
cqiPerNp than drxSmartProfile5-
(calculation in cqiPerNp)
(1) If drxOnDuratT is less than cqiPerNp
drxProfilePriority.
- ceil(drxOnDuratT/cqiPerNp)*floor LTE585 Smart DRX (optional) Draft Version A
(calculation in cqiPerNp) must be greater than
(1000ms/drxShortCycle) LTE585 Smart DRX (optional) Draft Version A
-or12*drxShortCycle
equal to 12. must be less than 1000ms.
smartStInactFactor*drxShortCycle must be LTE585 Smart DRX (optional) Draft Version A
greater than or equal
(2) If drxOnDuratT to max(200ms,
is greater than or equal to LTE585 Smart DRX (optional) Draft Version A
drxLongCycle).
cqiPerNp (calculation in cqiPerNp)
smartStInactFactor*drxShortCycle
- ceil(drxOnDuratT/cqiPerNp)*floor must be LTE585 Smart DRX (optional) Draft Version A
greater
(1) than or equal
(1000ms/drxShortCycle)
If drxOnDuratT to max(200ms,
is lessmust
than be greater than
cqiPerNp LTE585 Smart DRX (optional) Draft Version A
drxLongCycle).
or equal to 12.
(calculation in cqiPerNp) LTE585 Smart DRX (optional) Draft Version A
- 12*drxShortCycle must be less than 1000ms.
drxSmartProfile5-drxProfilePriority
(3) smartStInactFactor*drxShortCycle must be be
must LTE585 Smart DRX (optional) Draft Version A
less
(2) Ifthan
greater drxSmartProfile4-drxProfilePriority.
than or equal
drxOnDuratT to max(200ms,
is greater than or equal to LTE585 Smart DRX (optional) Draft Version A
drxLongCycle).
cqiPerNp (calculation in cqiPerNp)
(1) If drxOnDuratT is less than cqiPerNp
- ceil(drxOnDuratT/cqiPerNp)*floor LTE585 Smart DRX (optional) Draft Version A
(calculation in cqiPerNp) must be greater than
(1000ms/drxShortCycle) LTE585 Smart DRX (optional) Draft Version A
-or12*drxShortCycle
equal to 12. must be less than 1000ms.
smartStInactFactor*drxShortCycle must be LTE585 Smart DRX (optional) Draft Version A
greater
(2)
If atIfleastthanoneorofequal
drxOnDuratT to max(200ms,
theisparameter
greater than or equaland
acBarSig to LTE39 System information broadcast (optional) Version 1.0
drxLongCycle).
cqiPerNp
acBarOc (calculation
is configured, in cqiPerNp)
eCallAcBarred must be
If parameter actUlLnkAdp
- ceil(drxOnDuratT/cqiPerNp)*floor is set to value LTE1034 Extended Uplink Link Adaptation Draft Version A
set to "barred"
'eUlLa', parameter or "Not barred"
eUlLaAtbPeriod
(1000ms/drxShortCycle)
If parameter actUlLnkAdpmust value be
must
is setbetogreater than (standard)
LTE1034 Extended Uplink Link Adaptation Draft Version A
specified,
or equal
'eUlLa', toin other
12.
parameter case the parameter
eUlLaBlerAveWin don'tbe
must (standard)
If parameter
need actUlLnkAdp is set to value
to beinconfigured LTE1034 Extended Uplink Link Adaptation Draft Version A
specified,
'eUlLa', other case
parameter the parameter
eUlLaDeltaMcs mustdon't
be (standard)
If
(3)parameter
need actUlLnkAdp
smartStInactFactor*drxShortCycle
to be configured is set to value must be LTE1034 Extended Uplink Link Adaptation Draft Version A
specified,
'eUlLa', in other
parameter case the parameter
eUlLaLowMcsThr don't
must be (standard)
greater
If parameterthan or equal
actUlLnkAdpto max(200ms,
is set to value LTE1034 Extended Uplink Link Adaptation Draft Version A
need to
specified, be configured
in other case the parameter don't
drxLongCycle).
'eUlLa', parameter eUlLaLowPrbThr must be (standard)
If parameter
need to be actUlLnkAdp
configured is set to value LTE1034 Extended Uplink Link Adaptation Draft Version A
specified,
'eUlLa', in other
parameter case the parameter don't
The
need earfcnDL
to be musteUlLaPrbIncDecFactor
configured be 18000 lower than (standard)
LTE40 Physical & transport channels Draft Version A
must
earfcnUl be specified, in other case the parameter (optional), LTE677 FRNA Flexi 3-sector
The
The value
earfcnDL of redBwMinRbUl
must
don't need to be configured be 18000must lowerbethan
less than LTE40 Physical & transport channels Draft Version A
or equal to the value of eUlLaLowPrbThr.
earfcnUl RF Module
(optional), 1600, phase
LTE677 FRNA 0 (BARBI)
Flexi 3-sector
parameterofisthe
The phyCellId mandatory
cell mustif be unique within LTE494for
RFSW Commercial Mobile Alert System Draft Version A
pwsWithEmAreaId RF Moduledemo 1600,(standard), LTE763
phase 0 (BARBI)
all case
In LNCEL instancesisserved
enableAmcPdcch set tois'true'.
by the eNB having
false, FXFA,
LTE749-aFlexi 3-sector RF Module 1900
RFSW for demo (standard), LTE763 (optional)
Link adaptation for PDCCH Draft Version A
the same downlink frequency
pdcchCqiAvg shall not be determined earfcnDL. and the MHz
FXFA, (standard),
Flexi LTE87
3-sector FXCA,
RFeNB
Module Flexi
19003-
LTE53c
sector RFSimplified
Module intra
850 MHz handover
(standard), (optional) Draft Version A
default value is used implicitly MHz (standard), LTE87 FXCA, Flexi 3-
In case enableAmcPdcch is false, LTE88-a
LTE53c FXDA, Flexi 3-pipe RF Module
sector RF Module 850 MHz (standard),(optional)
Simplified intra eNB handover Draft Version A
pdcchCqiShift
If dl64QamEnable shallisnot
setbeto determined
'true', and the 900 MHzSupport
LTE88-a
LTE793 (standard),
FXDA, Flexi LTE103-a
3-pipeinRF
of 16QAM CN4185
DLModule
(optional) Draft Version A
default value is used
enableDl16Qam mustimplicitly
be set to 'true'. FRLB,
900 MHz Flexi RRH 2TXLTE103-a
(standard), 730 (demo CN4185
In case enableAmcPdcch
If enableDl16Qam is set tois'false',
false, version) (standard),
FRLB, Flexi RRH 2TX LTE921 FRBB, Flexi
730 (demo
pdcchOlComp shall notbebesetdetermined RF Module 760 (standard),
LTE921LTE1072
dl64QamEnable must to 'false'. and the version) (standard), FRBB, Flexi
default value is used implicitly Flexi Lite BTS
RF Module 760750 (standard),
(standard), LTE1040
LTE1072
If enableDl16Qam is set to 'false', the
In case enableAmcPdcch is false, Flexi
Flexi 3-sector
Lite BTS RF 750Module 1800LTE1040
(standard), 3x80 W
maximum value for iniMcsDl is 9.
pdcchClComp shall not be determined and the (standard), LTE1356 CN5027
Flexi 3-sector RF Module 1800 3x80 WCRL0644
default value is used implicitly Adding LTE1356
(standard), LTE1356FXCC Flexi 2CRL0644
CN5027 sector RF
In case enableAmcPdcch is false, Module 850 to RL30 (standard),
Adding LTE1356 FXCC Flexi 2 sector RF
In case (enableAmcPdcch is false) OR LTE749-a Link adaptation for PDCCH (optional) Draft Version A
(enablePcPdcch
In case enablePcPdcch is false),
is enableLowAgg
false, shall LTE749-a Link adaptation for PDCCH (optional)
Draft Version A
not be determined
enableLowAgg and
shall notthe
bedefault valueand
determined is
used implicitly LTE654 LTE Configuration Management (optional) Draft Version A
the default value is used implicitly
In case enablePcPdcch is false, pdcchPcBoost Draft Version A
shall not be determined and the default value LTE27 Open loop UL power control and DL power Draft Version A
is used implicitly setting (optional), LTE28 Closed loop UL power
The parameter
In case enablePcPdcch is false, pdcchPcRed LTE736 CS fallback to UTRAN Draft Version A
filterCoefficientCSFBCpichEcn0 is control (optional)
shallparameter
The not be determined and the default value LTE736 CS fallback to UTRAN Draft Version A
mandatory
is required if measQuantityCSFBUtra
used implicitly
filterCoefficientCSFBCpichRscp is mandatory LTE56 Inter RAT handover to WCDMA (optional)
If
is adjWInfList is not empty and Draft Version A
In case enablePcPdcch set is
required false, pdcchPcReloc
if measQuantityCSFBUtra is then
measQuantityUtra
set to is notisempty
'cpich-EcN0'.
If adjWInfList to'cpichEcN0'
and LTE56 Inter RAT handover to WCDMA (optional)
shall
set tonot be determined
'cpich-RSCP'. and the default value Draft Version A
filterCoefficientCpichEcn0
measQuantityUtra must be fc0 ...fc19.
is used implicitly is set to 'cpichRSCP' then Draft Version A
filterCoefficientCpichRscp must be 'fc0'...'fc19'.
LTE55 Inter-frequency handover (optional) Draft Version A
If adjGInfList is not empty then LTE442 Network Assisted Cell Change to GSM Draft Version A
filterCoefficientRSSI
no relations must be 'fc0'...'fc19'. (optional)
Version V1.1
no relations Draft Version A
The actual range depends on the mncLength: Draft Version A
ifDetermines
mncLength=2, then
length range is 00..99, if
of MNC. Draft Version A
mncLength=3, then range is 000..999
If actEnhAcAndGbrServices is configured LTE496 Support of QCI 2, 3 and 4 Draft Version A
to 'false' gbrCongHandling must be LTE39 System information broadcast (optional) Version 1.0
set to 'none'.
Recommendation: LTE41 PDCP, MAC & RLC support (optional) Draft Version A
If actEnhAcAndGbrServices set to LTE41 PDCP, MAC & RLC support (optional) Draft Version D
'true' it is recommended to configure gbr-
CongHandling to 'l2andl3'. LTE41 PDCP, MAC & RLC support (optional) Draft Version A
harqMaxTrUlTtiBundling is mandatory required LTE907 TTI bundling (optional) Draft Version A
if actTtiBundling is set to 'true'. LTE39 System information broadcast (optional) Draft Version A
If prachHsFlag is set to 'true'
harqMaxTrUlTtiBundling hsScenario must
>= harqMaxTrUl LTE48 Support of high speed users Draft Version A
be LTE53 Intra and inter eNB handover with X2 Draft Version E
configured, if prachHsFlag is set to 'false' (optional)
The parameter is mandatory if
hsScenario LTE442 Network Assisted Cell Change to GSM Draft Version A
threshold2GERAN
ifvalue is not
actIfHo allowedistoset.
is 'enabled', be configured.
threshold2InterFreq (optional)
LTE55 Inter-frequency handover (optional) Draft Version A
must be 0…15 dB
If adjWInfList is not empty then LTE56 Inter RAT handover to WCDMA (optional) Draft Version A
hysThreshold2Wcdma
hysThreshold2a must be must
set be 0... 15.dB
to 0…15 LTE55 Inter-frequency handover (optional), LTE56 Draft Version A
if one of the following condition applies: Inter
LTE53 RAT handover
Intra and intertoeNB
WCDMA (optional),
handover with X2LTE442
Draft Version A
- an instance of LNRELW is configured Network Assisted Cell Change to GSM (optional)
(optional)
in the LNCEL LTE423 RRC connection release with redirect Draft Version A
-- an instance of LNRELG is configured (standard)
LTE487 Idle mode mobility load balancing Draft Version A
in the LNCEL
iFLBHighLoadGBRDL must be bigger or equal
- actIfHo is set to 'enabled' - Draft Version A
than iFLBTargetLoadGBRDL
iFLBHighLoadNonGBRDL must be bigger or - Draft Version A
equal than iFLBTargetLoadNonGBRDL
iFLBHighLoadPdcch must be greater than or Draft Version A
equal
- to iFLBTargetLoadPdcch - Draft Version A
iFLBTargetLoadGBRDL must be smaller or - Draft Version A
equal than iFLBHighLoadGBRDL
iFLBTargetLoadNonGBRDL must be smaller or - Draft Version A
equal than iFLBHighLoadNonGBRDL
iFLBHighLoadPdcch shall be greater than or Draft Version A
equal
- to iFLBTargetLoadPdcch LTE487 Idle mode mobility load balancing Draft Version A
- LTE487 Idle mode mobility load balancing Draft Version A
LTE42 DRX in RRC connected mode (standard), Draft Version A
LTE815 Proactive
LTE41 PDCP, MACUL& Resource Assignment
RLC support (optional) Draft Version A
(optional)
iniMcsDl is applicable only if both, LTE41 PDCP, MAC & RLC support (optional) Draft Version A
dlOlqcEnable and dlamcEnable are
In case actModulationSchemeUL set to
is set to LTE41 PDCP, MAC & RLC support (optional) Draft Version A
'false'.
'QPSK', the maximum value for iniMcsUl is 10. LTE41 PDCP, MAC & RLC support (optional)
The range of iniPrbsUl depends on ulChBw Draft Version A
setting:
Can only be set to higher value than 16 in case LTE39 System information broadcast (optional) Draft Version A
-dl64QamEnable
if ulChBw is setistotrue. '5.0 MHz', iniPrbsUl is
restricted to 1...25
In case enableDl16Qam is FALSE, the LTE39 System information broadcast (optional) Draft Version A
-The if
maximum ulChBw is
value value set
of each to '10.0
forlcrId
iniMcsDlMHz', iniPrbsUl
in theisLNCEL
9. is LTE145 LTE Configuration Management (optional) Draft Version A
restricted
objects to 1...50
must be unique in the eNB.
-It ifisulChBw
requiredisthatset to '15.0 the
always MHz',
pairiniPrbsUl
of is
restricted
LNCEL to 1...75
object and related LCELL object
-exists,
if ulChBw is set
i.e. the to '20.0
LCELL MHz',
object withiniPrbsUl is
restricted lCellId
matching to 1...100must be created respectively
The
deleted value of the
with redBwMinrbUl
same plan file. must be less than
or equal
The globalto cell
the value
identity ofainiPrbsUl.
related
Note:
neighbor Thecellinitial amount
LNREL mustof be
PRBs in uplink
different to
LTE106 6 cell support with one System Module Draft Version A
loadBalancingProfile is mandatory required if (standard)
- Draft Version A
actIntraFreqLoadBal is set to 'true'.
lowerMarginCIO is mandataory required if - Draft Version A
actIntraFreqLoadBal is set
minBitrateDl value must beto 'true'.
less or equal to LTE20 Admission control (optional) Draft Version A
maxBitrateDl
maxBitRateUl value must be greater or equal LTE20 Admission control (optional) Draft Version A
than minBitRateUl
Draft Version A
Draft Version A
Draft Version A
if the downlink channel bandwidth dlChBw is Draft Version A
set
LNCEL-maxGbrTrafficLimit to '5 MHz' and 4 IRFIM instances + max(LNCEL- are LTE497 Smart admission control Draft Version A
created,
addGbr-
If
-TrafficRrHo, phichDur
for maxCrSibDl is set lowerto value than 'Extended',
0.18, the sum of LTE40 Physical & transport channels (optional) Draft Version A
maxNrSymPdcch LNCEL-addGbrTrafficTcHo)
must be set to '3' must
all
(1) Range depends on dlChBw value as
be inter frequency neighbor and blacklisted LTE113 Cell Bandwidth - 15 MHz (standard), LTE7 Draft Version D
cells
follows:
equal mustor less be than
less than90 or equal to 50, Support of multiplecontrol
EPS bearer (standard),
The
If range for maxNumActUE depends LTE20 Admission (optional), LTE458 RL20 Draft Version A
i.e.
-on ifmaxNrSymPdcch
sum (actual
dlChBw
dlChBw, is set
ulChBw to is setMHz'
Multiplicity
'5.0
and
toof'1', or
actFlexBbUsage
actLdPdcch
intFrBCList + LTE458
Capacity RL20
and Capacity
Dimensioningand Dimensioning
(standard)
can
actual
maxNumCaConfUeDc
'10.0 not be configured
Multiplicity
MHz',tomaxNumActDrb of to 'true',
intFrNCList)
should must for of
be smaller all
be less or4 LTE1089
(standard)Downlink carrier aggregation - 2 CC Draft Version A
according
maxNrSymPdcch
IRFIMs
equal to=< 50 following
maxNumActUE conditions
set greater to '1' the allowed (optional)
or
(1)
(1.1) equal
Range to 2400
depends
ifofactFlexBbUsage on dlChBw
set to value
'false' as LTE113 Cell Bandwidth - 15 MHz (standard), Draft Version A
value
--follows: for maxCrSibDl
if dlChBw actLdPdcch
is set lowerto '15.0 stillthan
depends
MHz' 0.24, or the on the sum of LTE10 EPS bearers for conversational voice
and
configured
The
all range
inter values
for
frequency for dlChBw
maxNumRrc and
depends phichDur
on LTE20 Admission control (optional) Draft Version A
-'20.0
- ifmin(ulChBw,dlChBw)
dlChBw, dlChBwMHz', is
ulChBw set andtoneighbor
maxNumActDrb '5.0 MHz',
has
and
must
value
actFlexBbUsage
blacklisted
be
'5 less (standard), LTE458 RL20 Capacity and
cells
or
(1) equal
The must to
range be
4200 less
for than or
maxNumRrcEmergency equal to 75, LTE113 Cell Bandwidth
maxNumQci1Drb
MHz',
according maxNumActUE
to dlChBw
following must be
value
conditionsless range or equal
is Dimensioning (standard)- 15 MHz (standard), Draft Version A
i.e.
(2)
depends sum (actual
maxNumActDrb on Multiplicity
might
and of intFrBCList
restrict
ulChBw or + LTE22 Emergency call(UL/DL)
handling (standard)
to
restricted
Range 200 to 0...600
depends on (default value 300)
(1.1)
actual
will
according beif Multiplicity
actFlexBbUsage
restricted by
toisfollowing of dlChBw set to
intFrNCList)
maxNumRrc
conditions: 'false'
of as
and/orallfollows:
4 LTE45 Fair scheduler (optional) Draft Version D
--and
dlChBw ifmin(ulChBw,dlChBw)
dlChBw = '5.0 set
MHz', to '10.0
valuehas MHz',value
range is restricted
IRFIMs
Range
maxNumRrcEmergency
-maxNumQci1Drb if1...7 =< 75
and
min(ulChBw,dlChBw) defaultmust valuebe depend
due
is set toto on ulChBw, LTE45 Fair scheduler (UL/DL) (optional)
calculations Draft Version D
-'10
to MHz', maxNumActUE
(default
min(ulChBw,dlChBw) value 7) less
value
is follows:
'5 MHz', or equal
range isto 0.24,
the
needed
'5.0 for maxCrSibDl
values
MHz', for are
those greater
limited
parameter
maxNumRrcEmergency as than or equal must
to
restricted
dlChBw
maxNumRrc 400 = to 0...600
'10.0value MHz', (default
range value is value
range
restricted 300)
isrestricted
restricted
to LTE20 Admission control (optional) Draft Version A
the
ulChBw sum =of all
'5.0 inter
MHz', frequency
value range neighbor is and
--to
be--toifmaxNumActDrb
0...480
less or(default
dlChBw
min(ulChBw,dlChBw)
1...10 equal
(default
to
is setvalue to>=
value480 maxNumActUE
'15.0 has
10)
300) MHz',value
blacklisted
-(2.1) if1...7 cells
(default value
if actMultGbrBearers
min(ulChBw,dlChBw) must be less
7)beisis set than
setto or
toequal equal to LTE736 CS fallback to UTRAN Draft Version A
maxNumQci1Drb
'15
dlChBw
-100, MHz',
min(ulChBw,dlChBw)= maxNumActUE
'15.0 MHz',must value
is less
value
'10 range
MHz',orrange is is
restricted
ulChBw
'false'
'10.0 =
following
MHz', '10.0 MHz',
is condition value need range to be is restricted
fulfilled
If
to
restricted
to
maxNumRrc
i.e.
adjWInfList
500
1...15
sum tomaxNumRrcEmergency
(default
(actual 0...720
value
not
value empty
(default
range
Multiplicity 15) value
isofrestricted
intFrBCList600) to +
LTE56 Inter RAT handover to WCDMA (optional) Draft Version A
-to
must
-ulChBw
ifdlChBw
1...10
maxNumRrc
then
if dlChBw be
min(ulChBw,dlChBw)
dlMimoMode =
(default
less is
'20.0 or
measQuantityUtrasetis
value
+MHz',
max(addAUeRrHo,
equal
to
not '20.0 10)
tohas
value
set 600
must
MHz',
to value
range
'Closed be 'cpichRSCP'
is restricted
0...600
actual
addAUeTcHo)
-maxNumQci1Drb
or if1...20 (default
Multiplicity
= '15.0>=
min(ulChBw,dlChBw)
'cpichEcN0'. value
of
MHz', 300)
intFrNCList)
value
maxNumActDrb
must be isvalue range
set
less to
or is restricted LTE703 Downlink adaptive closed loop MIMO for
+
loop
equal
Draft Version A
-'20
to
MIMO',
of MHz',
min(ulChBw,dlChBw)
all 4 IRFIMsmaxNumActUE
(default
mimoClCqiThU =< value
100 20)
are
is
if the'15 not MHz',
downlinkrange
defined isand the two antennas (optional)
orchannel
-to
mimoClCqiThU
max(addNumDrbRadioReasHo,
'15.0
to
restricted
default and1...15
600MHz', (default
measQuantityUtra
value to 0...840
is used
valuemust
value
maxNumRrcEmergency 15)
(default
insteadis set be to
value
equal'cpichRSCP'
600)
greater LTE703 Downlink adaptive closed loop MIMO for Draft Version A
maxNumRrc
bandwidth
ulChBw
than
addNumDrbTimeCriticalHo)
must =
mimoClCqiThD
be less'20.0value
dlChBw
or MHz',
equal range
is set
value
to 840is
to restricted
'5 MHz'
range isand to 5
restricted two antennas (optional)
ifthen
(2)
(1.2)
mimoClCqiThU
0...840
filterCoefficientCpichRscp
maxNumQci1Drb
dlMimoMode
if instances
actFlexBbUsage
(default is set
value
value might
to 'Closed
must
600) set be restrict must
to 'true'loop be
equal or greater LTE703 Downlink adaptive closed loop MIMO for Draft Version A
IRFIM
to
-(2.2)
'fc0'...'fc19'. if 1...20if (default
actMultGbrBearers
min(ulChBw,dlChBw) are
value created,
20) is isset set to to
or
MIMO', willmimoClCqiThD
bemimoClRiThD
restricted by maxNumRrc or
and
than
-if-'20.0
'true' min(ulChBw,dlChBw)
dlMimoMode
for maxCrSibDl
following set tomust
is lower
condition is '20
'Closed
than
need
beMHz',
0.18,
set,
loop the
otherwise two antennas (optional)
sum of LTE703 Downlink adaptive closed loop MIMO for Draft Version A
-alland
maxNumRrcEmergency
the
maxNumRrc
MHz',
default
min(ulChBw,dlChBw) maxNumRrcEmergency
measQuantityUtra
value
value is range
used hasis
due set
instead
is toto
value
restricted
be'5 fulfilled
tocalculations
'cpichEcN0'
to
MIMO',
-mimoClRiThU
must
then
In inter
min(6*maxNumRrc,
case be mimoClRiThU
frequency
less ormust
equal
filterCoefficientCpichEcn0
dlMimoMode neighbor must
4200)
togreater
is 8403:
not be
and set,
>=Dynamic
max-
must otherwise
blacklistedbeOpen two antennas
LTE70-b (optional)
Downlink adaptive open loop MIMO for
needed
MHz'
0...840 for
or(default
'10 those
MHz', parameter
value be
maxNumActUE
600) or value Draft Version A
the
cells
NumActDrb
(2)
'fc0'...'fc19'.
Loop default
must
Following
MIMO, value
be + less is used
than or instead
max(addNumDrbRadioReasHo,
condition
mimoOlCqiThD need equal to
shallbeto 47,
not i.e.
be sum two antennas (optional)
(2.1)
an
range
In
(1.2) case if
equal actEnhAcAndGbrServices
than
ifisactFlexBbUsage
restricted
dlMimoMode mimoClRiThD
tobe 0...420
is greater
not
set 3: to Dynamic
'true', is Open LTE70-b Downlink adaptive open loop MIMO for Draft Version A
mimoClRiThU
(actual
addNumDrbTimeCriticalHo)
fulfilled
defined Multiplicity
with
and respect
the must of
default tointFrBCList isor
maxNumRrcEmergency
value
set
(2)
Loop
maxNumRrc to MIMO,
'false'
maxNumActUE and actConvVoice
mimoOlCqiThU
value might
range restrict
is shallisused
restricted set
or not implicitly
to be
to two antennas (optional)
an
+
In
if(2.1) equal
actual
case
additionally
iffollowing
measQuantityUtra than
Multiplicity
dlMimoMode mimoClRiThDof
actIMSEmerSessR9
actEmerCallRedir intFrNCList)
is not 3: Dynamic
is settotobethen
is 'cpichEcN0' of all 5
Open LTE70-b Downlink adaptive open loop MIMO for Draft Version A
'true'
will
defined
0...420 be restricted
and the condition
by
default need
maxNumActDrb,
value is used fulfilled
implicitly
IRFIMs
Loop
is
'Enabled'
b2Threshold2UtraEcn0
mimoOlCqiThU set MIMO,
to =<
'true'47 mimoOlRiThD
must be must
equal shall
be or 0 not be
...49.
greater than two antennas (optional)
-maxNumRrc
In maxNumRrc
case dlMimoMode +maxNumRrcEmergency
max(addAUeRrHo,
is than
not 3:0.24,
Dynamic
-(2)
defined for Following
maxCrSibDl
andMIMO,
or
conditions
the lower
default need
value toused
is bethe sum of LTE70-b Downlink adaptive open loop MIMO for Draft Version A
if-mimoOlCqiThU
mimoOlCqiThD
addAUeTcHo)
Open
due
fulfilled
min(6*maxNumRrcEmergency,
maxNumRrcEmergency
measQuantityUtra
to Loop
calculations
with >=
respectmust isbe
maxNumQci1Drb
mimoOlRiThU
needed
to
>=
'cpichRSCP'
equal
maxNumRrc for max-
those
or + implicitly
then
shall
greater than two antennas (optional)
minBitrateDl
all
4200)
NumRrc
b2Threshold2UtraRscpinter>= frequency value
+maxNumActDrb
max(addAUeRrHo, must
neighbor be
must less
+ and be or equal
blacklisted
addAUe-
-5 ...91. to LTE20 Admission control (optional) Draft Version A
max(addNumQci1DrbRadioReasHo,
not
parameter
mimoOlCqiThD
-cells be
maxNumRrc defined and
>= the
maxNumActUE default value is
maxBitrateDl
mimoOlRiThU must
max(3*addEmergencySessions,
TcHo)
maxBitRateUl be less
must
value than be or
equal equal or
must be greater than or to
greater71, than LTE20 Admission control (optional)
addNumQci1DrbTimeCriticalHo)
used
--mimoOlRiThD maxNumRrc
maxNumRrc implicitly. >=
>= maxNumActUE
maxNumQci1Drb Draft Version A
i.e. sum
addNumDrbRadioReasHo,
(2.2)
equal (actual
ififtoactIMSEmerSessR9
minBitRateUl Multiplicity ofisintFrBCList
set +
(2.2)
-mimoOlRiThU
The
(2.1) maxNumActDrb
relatedadditionally
if Multiplicity MOPR must
actEnhAcAndGbrServices >= be equal
maxNumActUE
instance isor mandatory
actual
addNumDrbTimeCriticalHo)
to 'true' of intFrNCList) ofisall 5 Draft Version A
actIMSEmerSessR9
greater
(2.1)
required.
set tovalue than
applicable
'false' mimoOlRiThD
if
following iscondition
set to 'true' need to all list
IRFIMs
The
-(3) =<of
maxNumQci1Drb
maxNumRrcEmergency 71 spid must mustbe unique
>=be half
max- within Draft Version A
actIMSEmerSessR9
be
-NumActUE for fulfilled
maxCrSibDl greater is setthan to 'true'
or equal to 0.24,
entries
or
maxNumQci1Drbless including
than optionally
+maxNumActDrb,
max(addEmergencySessions,
+ max(addEmergency- configured
greater spid
i.e.
-The
-the
ranges.
maxNumQci1Drb
addAUeRrHo,
value
maxNumRrcEmergency
maxNumRrc
sum of of
all spidLast
+
inter <=
must>=
max(addAUeRrHo,
frequency
addAUeTcHo) maxNumActDrb/2
bemax-
neighbor than
and Draft Version A
Sessions,
spid.
NumActUE
addAUeTcHo) + max(addEmergencySessions,
>=must maxNumActDrb +
blacklisted
no
(each
(2.2.1) relationsGBR-DRB
if cells
additionally is countedbe lessasthan
actMultBearers normal or equal to Draft Version E
addNumQci1DrbRadioReasHo,
addAUeRrHo,
max(addNumDrbRadioReasHo, addAUeTcHo)
95,
DBR
is
no set as
relations well) following
to values
'true'
addNumQci1DrbTimeCriticalHo) condition need to
All spid ofMultiplicity
the range Draft Version E
addNumDrbTimeCriticalHo)
i.e.
be
(3) sum
fulfilled
maxNumQci1Drb (actual must ofmust
be half
be unique
intFrBCList +
within
ifno relations
additionallyall list entries
actConvVoice including isfurther,
setof alloptionally Draft Version E
-actual
or Multiplicity
maxNumRrcEmergency
less than ranges.
configured,
of intFrNCList)
maxNumActDrb, i.e. >= 5
to
no'true'
IRFIMs relations =< 95 + max(addEmergency-
maxNumQci1Drb <= maxNumActDrb/2 Draft Version E
-Sessions,
The maxNumRrc
maximal + max(addAUeRrHo,
allowed number
(each
The GBR-DRB
product of is
parametercounted asof configurable
modPeriodCoeff and
addAUeTcHo)
GNFL instances
addNumQci1DrbRadioReasHo, >=depends
maxNumQci1Drb on the configured + DL LTE39 System information broadcast (optional) Draft Version A
normal
defPagCyc DBR
max(addNumQci1DrbRadioReasHo, as
(given well)in rf) must not exceed 1024.
ifchannel
n1PucchAn bandwidth
addNumQci1DrbTimeCriticalHo) is set and to 10the thanmaximumdeltaPucchShift code LTE40 Physical & transport channels (optional) Draft Version A
addNumQci1DrbTimeCriticalHo)
rate.
must be set to 1
- min(6*maxNumRrcEmergency,
(2.2) LTE39 System information broadcast (optional) Draft Version A
4200)if>= actMultGbrBearers
maxNumActDrb +is set to
if'true' followingiscondition
n1PucchAn
max(3*addEmergencySessions, not set toneed 10, the to be fulfilled
result of LTE39 System information broadcast (optional) Draft Version D
-The
( min(6*maxNumRrc+
n1PucchAn
maximumMODULO
addNumDrbRadioReasHo, value ofmax(addAUeRrHo,
(36/deltaPucchShift)
nCqiRb depends on ) LTE40 Physical & transport channels (optional) Draft Version A
addAUeTcHo),
must be (in
addNumDrbTimeCriticalHo)
ulChBw 0 PRB) 4200) >= maxNumActDrb
+ LTE971 Intra-LTE mobility offsets (standard) Draft Version A
-(3) if actFlexBbUsage
if ulChBw is set to '5 MHz', set to 'true', nCqiRb is limited
max(addNumDrbRadioReasHo,
maxNumRrcEmergency
to 25 value range is LTE145 LTE Configuration Management (optional) Draft Version A
addNumDrbTimeCriticalHo)
-restricted
if ulChBwtois0...420 set to '10 MHz',(4) if
nCqiRb is limited LTE27 Open loop UL power control and DL power
actEmerCallRedir is set to 'Enabled' Draft Version D
to 50
following
- if ulChBw condition
is set toneed '15 MHz', to be nCqiRb fulfilled is limited setting (optional)
LTE27 Open loop UL power control and DL power Draft Version D
-tomaxNumRrcEmergency
75configured maximal output power >= max- setting (optional)
The LTE40 Physical & transport channels Draft Version A
NumRrc+max(addAUeRrHo,
- if ulChBw addAUe-
(pMax) doesishave set toimpact '20 MHz', on the nCqiRb maximal is not (optional), LTE1106 Flexi low power RRH
TcHo)
limited
allowed cell power reduction (dlCellPwrRed) 850 2TX for optical repeater interface
- for pMax set to 49.0 dBm, dlCellPwrRed (standard), LTE1040 Flexi 3-sector RF
maximum value is 10.0 dB Module 1800 3x80 W (standard),
- for pMax set to 47.8 dBm, dlCellPwrRed LTE1072 Flexi Lite BTS 750 (standard),
maximum value is 9.5 dB LTE1337 FHEC Flexi RRH 2TX 1800 low
- for pMax set to 46.0 dBm, dlCellPwrRed power (standard)
maximum value is 7.7 dB
no relations LTE39 System information broadcast (optional) Draft Version A
no relations LTE39 System information broadcast (optional) Draft Version E
LTE49 Paging (optional), LTE39 System Draft Version A
information broadcast
LTE749-a Link (optional)
adaptation for PDCCH (optional) Draft Version A
LTE749-a Link adaptation for PDCCH (optional) Draft Version A
LTE45 Fair scheduler (UL/DL) (optional) Draft Version A
LTE31 Link adaption by AMC (UL/DL) (optional) Draft Version A
LTE45 Fair scheduler (UL/DL) (optional) Draft Version A
LTE45 Fair scheduler (UL/DL) (optional) Draft Version A
LTE749-a Link adaptation for PDCCH (optional) Draft Version A
If enableAmcPdcch is false and actOlLaPdcch LTE749 Link adaptation for PDCCH (standard), Draft Version A
is
If actOlLaPdcch false, pdcchCqiShift is set to shall not be determined LTE1035
'false', LTE1035 Outer
Outer loop
loop link
link adaptation
adaptation for
for PDCCH
PDCCH Draft Version A
and
pdcchHarqTargetBler the default value is is used
not instead. the
determined, (standard)
(standard)
If actLdPdcch is set to 'false', configured UL LTE749 Link adaptation for PDCCH (standard), Draft Version A
default
and DL value
split ofisPDCCH
used instead.
If
If
If actOlLaPdcch
periodicCqiFeedbackType
pdcchHarqTargetBler is set toresources
is'false', is set
greater pdcchCqiShift
to 1%,
than
LTE616
LTE496 Usage
Supportbased
of QCIPDCCH adaptation
2, 3 and 4 Draft Version A
(pdcchUlDlBal)
is
'UE_selected' fixed set to the is configured
fixed used. value. (standard)
pdcchHarqTargetBler
activateMeas
If actLdPdcch for
ismust
set to shall
measurementType
'true', be at maximum
ULpdcchCqiShift set
and DL split of one Draft Version A
cqiPerSbCycK actOlLaPdcch is set be to 'true',
half
to
PDCCH
is adjusted
of dlTargetBler.
'periodicIntraFreq'
resources
runtime may and canspecified.
be only
uses be configured
adjusted
the set runtime
to
Draft Version A
'true'
based
value ifasactMDTCellTrace
on loadvalue..
start and the configured is set to 'true'. value
If
The
(pdcchUlDlBal) reportInterval
modificationdefines isofset tothe '120ms'
actMDTCell- initialthan starting point Draft Version A
reportAmount
Trace
then.
If from must
'true' to be
'false'
reportInterval is set to '120ms' than '1'. requires that in Draft Version A
If
allreportInterval
reportAmount LNCEL instances is set
must be to'1'.'240ms' is set
activateMeas
If
than
to phichDur is set tomust
reportAmount
'false'. valuebe 'Extended',
'1' or '2'. LTE40 Physical & transport channels (optional) Draft Version A
If
maxNrSymPdcch reportInterval is set
must tobe '240ms'set to value '3'
If reportInterval
than reportAmount must be '1' or '2'. is set to '480ms' LTE40 Physical & transport channels (optional) Draft Version A
than
If reportAmount
reportInterval is setmust to be less than '8'.
'480ms'
The
If
If phyCellId
phichDur
reportInterval of
is setisto the
set cell
'Extended', must
to '640ms' be unique
actLdPdcch within LTE40 Physical & transport channels (optional) Draft Version A
than
all
can reportAmount
LNCEL
not be instances
configured mustserved
to be
'true',less
by the
for than eNB '8'.having
phichDur set
than
If
If reportAmount
prachConfIndex
reportInterval is setismustwithin
tovalue berange
'640ms' less than (3..8)'8'. LTE40 Physical & transport channels (optional) Draft Version A
the
to
If
then same
'Normal' downlink
reportInterval
prachCS therangeallowed
is setfrequency
istorestricted
'1024ms' ofearfcnDL.
actLdPdcch
to '8'.
than
prachCS
still reportAmount
depends range is must
restricted be less
to than
values (1..12) if LTE40 Physical & transport channels (optional) Draft Version A
than
values
If
prachConfIndex (1..12)on isthe
reportAmount
reportInterval is set
configured
must
within to be
'1024ms'
range lessvalues than '16'.
(3..8)
for
The
dlChBw
Range:
If phyCellId
reportInterval
prachConfIndex must
and maxNrSymPdcch
0...ulChBw is set be
inwithin
PRBs
to
is(0..15) different
'2048ms' -6 LTE40 Physical & transport channels (optional) Draft Version A
than
prachCS
-(19..24) fromreportAmount
full range
allthen
physCellIdNcl must beisrange
values less
allowed
in than
the '16'.
iflist
than
prachHsFlag
If reportInterval reportAmount prachCS
can only
isisset must range
be beset
to '2048ms' less
is
to than
full
‘true’ scope
if'32'. LTE39 System information broadcast (optional) Draft Version A
prachConfIndex
intrFrNCList of the within
optional rangeIAFIM (19..24)
object,
If
(0..15)
ulCombinationMode
than reportInterval
reportAmount is set mustistoset '5120ms'
be to value
less than '32'.
which
than
If is relatedistoset
reportAmount
prachHsFlag the
must tocell. be less
'true' the than '64'. LTE39 System information broadcast (optional) Draft Version A
'MRC'.
-If reportInterval
from anyrootSeqIndex is set
blacklisted to
PCI '5120ms'
range (startIntraPci,
range
If
than for
prachHsFlag
reportAmount is the
set must depends
to 'true’be less on
hsScenario the
thanof'64'. LTE39 System information broadcast (optional) Draft Version A
rangeIntraPci)
configured prachCSin list
value intrFrBCList the
must
IAFIM be configured.
object, which is related to the cell. LTE39 System information broadcast (optional) Draft Version C
-If for prachCS
prachHsFlag set to '0'
is set tothe 'false’ allowedthe
prsBandwidth
rootseqIndex
hsScenario range
values
must not are depends on
24..816 i.e. no
be specified, the dlChBw LTE495 OTDOA Draft Version A
as
-The
valuesiWindowLen for prachCS set
is allowed to must to '1'
be set. the allowed
be appropriately set LTE495 OTDOA Draft Version A
below:
rootseqIndex
If
depending prachHsFlag onvaluesis set
the value are
to 'true'
of30..810 the
-- for dlChBw maximal - Draft Version A
allowed
prsConfigurationIndex. prachCSrangeset fortoto
set '5MHz'
'2' the the
rootSeqIndex allowed allowed
depends
value
rootseqIndex
- the configured
on
prsConfigurationIndex for prsBandwidth
values prachCSare is 25
is 36..804 (PRACH required if -
mandatory Draft Version A
-actOtdoa
cyclic for dlChBw
prachCS
shift)is as set
setset tototo
below '10MHz'
'3' the allowed
'true'. the allowed
prsNumDlFrames
maximal is mandatory required if LTE495 OTDOA Draft Version A
-rootseqIndex
actOtdoa for prachCS is set
values
set to to
'true'
are
'0' the 42..796
allowed
value
-prsPowerBoost
rootseqIndex for prsBandwidth
for prachCS setis to
values mandatory
'4'
are is24..816
the 50 required if
allowed LTE495 OTDOA Draft Version A
-actOtdoa
-rootseqIndex for
for dlChBw
prachCS is set settoto'15MHz'
values are
'1' the 52..787the allowed
allowed LTE40 Physical & transport channels (optional) Draft Version A
maximal
set
-rootseqIndex fortoprachCS
'true'. values
set to '5' are the allowed
30..810
value
-rootseqIndex for prsBandwidth
for prachCS values set to '2' are is
the 75
64..779
allowed Draft Version A
-rootseqIndex
puschCqiOffI for dlChBw
prachCSset settoto'20MHz'
value
values '6'
range
are the prsBandwidth
isallowed
36..804 restricted to 2...15 is Draft Version A
not
-rootseqIndex for prachCS values set to '3' are the 76..764
allowed
restricted
-rootseqIndex for prachCS values set to '7' the allowed Draft Version A
are 42..796
prsBandwidth
-rootseqIndex for prachCS values is mandatory
set to '4' are the 90..749required if
allowed LTE39 System information broadcast (optional) Draft Version E
actOtdoa
-rootseqIndex for prachCS is values
set to '8' the
are 52..787 allowed LTE1036 RSRQ Based Cell Reselection Draft Version A
set
-rootseqIndex fortoprachCS
'true'. values
set to '5' are the 116..732
allowed (standard)
LTE39 System information broadcast (optional)
-rootseqIndex for prachCS values set to '9' are the allowed
64..779 Draft Version E
-rootseqIndexfor prachCS values set to '6' are the 136..704
allowed LTE39 System information broadcast (optional) Draft Version A
-rootseqIndex
for prachCS values set to '10' are the 76..764allowed
LTE39 System information broadcast (optional) Draft Version A
-rootseqIndex
for prachCS values set to '7' are the 168..676
allowed
-rootseqIndex
for prachCS values set to '11' the
are 90..749 allowed LTE41 PDCP, MAC & RLC support (optional) Draft Version A
-rootseqIndex
for prachCS values
set to
In case actModulationSchemeUL is set to are
'8' the 204..526
allowed LTE41 PDCP, MAC & RLC support (optional) Draft Version A
-'QPSK',for prachCS
rootseqIndex set to '12'
values
the maximum arevaluethe allowed
116..732for raLargeMcsUl LTE41 PDCP, MAC & RLC support (optional)
-rootseqIndex Draft Version A
isfor 10.prachCS values set to '9' are the 264..566
allowed
-raNondedPreamb
for prachCS values
rootseqIndex set tomust '13'
arebe the allowed
equal
136..704 or greater LTE40 Physical & transport channels (optional) Draft Version A
-rootseqIndex
than for raPreGrASize
prachCS
raPreGrASize
values
set
must to are the
'10'
be less
328..498
allowed
than or equal to LTE41 PDCP, MAC & RLC support (optional)
-rootseqIndex
for prachCS values set to '14' Draft Version A
raNondedPreamb are the allowed
168..676
-rootseqIndex
for prachCS values
raRespWinSize setmust to '11' are
bethe 384..450
configured
allowed to LTE41 PDCP, MAC & RLC support (optional) Draft Version A
value '10' in case
rootseqIndex values actFlexBbUsage
are 204..526 is set
to 'true'.
- for prachCS set to '12' the allowed
rootseqIndex values are 264..566
- for prachCS set to '13' the allowed
rootseqIndex values are 328..498
- for prachCS set to '14' the allowed
rootseqIndex values are 384..450
In case actModulationSchemeUL is set to LTE45 Fair scheduler (UL/DL) (optional) Draft Version A
'QPSK', the maximum value for raSmallMcsUl LTE45 Fair scheduler (UL/DL) (optional)
Draft Version A
is 10.
If rcEnableDl is set to 'false', rcAmbrMgnDl LTE13 Rate capping (UL/DL) (optional) Draft Version A
must
If rcEnableUl not be defined is set toand the default
'false', rcAmbrMgnUl value is LTE13 Rate capping (UL/DL) (optional) Draft Version A
used
must instead
not be defined and the default value is
If rcEnableDl is set to 'false', rcAmbrMgnDl LTE13 Rate capping (UL/DL) (optional) Draft Version A
used
must instead
not be defined
If rcEnableUl is set toand the default
'false', rcAmbrMgnUl value is LTE13 Rate capping (UL/DL) (optional) Draft Version A
used
must instead
not be defined and the default value is
In case redBwEnDl is false, redBwMaxRbDl Draft Version A
used
shall instead
not be determined and the default value
If redBwEnDl is set to 'false', redBwMaxRbDl Draft Version A
is
must used implicitly
not be defined andtothe default value is
If redBwRpaEnUl is set 'false', LTE786-a Reduced Uplink Bandwidth (optional) Draft Version A
used
redBwMaxRbUl instead. must not be defined and the
If
Depending redBwRpaEnUl onisdlChBw is set to 'false',
the range of LTE786-a Reduced Uplink Bandwidth (optional) Draft Version A
default
redBwMinRbUl value used
must instead
not be defined and the
redBwMaxRbDl
If
Range redBwRpaEnUl
depends must
on is ulChBw be as
set to 'false', follows:
setting LTE786-a Reduced Uplink Bandwidth (optional) Draft Version A
default
5MHz:
redBwMaxRbUl value
1... 25 is usedmust instead
not be defined and the
-Range
In casedepends if ulChBw is
riPerM set to
isonset '5.0 MHz',
to '1' and
ulChBw the value
additionally
setting range LTE767 Support of aperiodic CQI reports Draft Version A
10MHz:
default
is restricted 1...
value 50
tois used
1...25 instead
riEnable
-In
15MHz: if ulChBw
case is set
1...
riPerMis
75 to
setis 'true',
to
set '5.0
to cqiPerNp
MHz',
value 1the
thancannot
value be set (optional), LTE31 Link adaption by AMC (UL/DL)
range
If
-to ifredBwRpaEnUl
ulChBw istoset is '10.0
to set toMHz', 'false',the value Draft Version A
is
20MHz: 5ms
restricted 1...25 (optional)
riPerOffset
redBwMinRbUl
range
If
-In if riPerM
ulChBwis 1...100
= 1must
restricted
is then
set
be
must set
to'10.0nottobe
1...50
riPerOffset
to
-1defined
MHz', mustthe beandsetthe
value to -1. Draft Version A
default
-The
If case
ifriPerM
ulChBw riPerM
value is
= 2isrange
then is
setused set
to to
'15.0
riPerOffset value
instead MHz', 2
mustthan
theor value
be set to 0. LTE40 Physical & transport channels (optional)
If
range
riPerOffset dlMimoMode
allowed mustisbe
is restricted set
to
forsettorootSeqIndex
1...50‘SingleTX’
to 0 ‘TxDiv' Draft Version A
range
riEnable
-when if ulChBwis restricted
mustis
prachHsFlag be
set toto
set 1...75
to
'15.0
is set ‘false’.
MHz',
to 'true' the value
In
if-depends case
ifriPerOffset
ulChBw riEnable
isthe
issetnot istoset
set'20.0 to
to 'true'
MHz',
'-1' andand
the additionally
value is
riEnable Draft Version A
range
riPerM isisrestricted
on
set to 1, to
configured
cqiPerNp1...75 prachCS
cannot be set to 1
range
ifset
- if ulChBw to
riEnable is restricted
'true', isactDrx
set
is set to tomust
'true'
to '20.0 1...100 be
and set to 'false'
additionally
MHz', the value Version 1.1
(PRACH
(5ms) cyclic shift) as below
The optimal default value depends is notUplink
on
-(riPerOffset
range for prachCS is set
is restricted not to '-1'
to'0' OR theriPerM
1...100 allowed '1'),
Draft Version A
Channel
actDrx
The valueisofBandwidth
must be set
redBwMinRbUl to parameter
'false' must follows:
as be is less than
ifrootseqIndex
--oriffor riPerM
ulChBw not values
is set set toto are
'1'
'5.0
24..816
and
MHz' riEnable
this is 25 setonly to
equal
prachCS to the value
set tobe of
'1' eUlLaLowPrbThr,
the Draft Version A
-'true', if actDrx
ulChBw is must
set to '10.0set toallowed
MHz' 'false'
this is 50
if parameter actUlLnkAdp
rootseqIndex values are 30..810 is set to value Draft Version A
--'eUlLa'. ifforulChBw is set to '15.0
'2' theMHz' this is 75
riPerM prachCS
defines set
theto tomultiplier allowed
for this
the cqiPerNp
-no
The valueif relations
ulChBw is set
of redBwMinRbUl '20.0 MHz', must 100 than LTE39 System information broadcast (optional)
beisperiodic
less Draft Version E
rootseqIndex
which results values
in are 36..804
the periodicity for RI
-or
reports.for equal
prachCS to periodicity
RI theset value to '3' of=theiniPrbsUl.
allowed* riPerM
cqiPerNp Draft Version A
rootseqIndex values are 42..796 Draft Version A
- for prachCS set to '4' the allowed
no
rootseqIndex relations values are 52..787 LTE39 System information broadcast (optional) Draft Version E
- for
1) prachCS setvalue
siWindowLen to '5' 1ms the allowed
shall not be used LTE39 System information broadcast (optional) Draft Version A
rootseqIndex
when there are values
moreare than64..7795 SIBs set in
- - Draft Version A
- for prachCS set to(i.e.
siMessageSibType '6' the allowed
sib2Scheduling,
-sib3Scheduling
rootseqIndex values and three are 76..764 in sibSchedulingList) - Draft Version A
-- for
2) prachCS set to '7'isthe
If LNCEL-actOtdoa setallowed
to ‘true’, following - Draft Version A
rootseqIndex
condition mustvalues be fulfilled: are 90..749 - (max.
-siWindowLen)
- for prachCS set smallerto '8' or theequalallowed to ((min - Draft Version A
rootseqIndex
((smallest
- values are 116..732
si[x]Periodicity), (PRS period)) – 10 - Draft Version A
- for /prachCS
ms) (# of SIBs set(setsto '9'inthe allowed
structure
- - Draft Version A
rootseqIndex values
sibSchedulingList +2)), arewhere 136..704 depending on
- forprsConfigurationIndex
the prachCS set to '10' thePRS allowedperiod in - Draft Version A
rootseqIndex
above
- equation valuesis setare to 168..676 - Draft Version A
- for prachCS
PRS period = set - 160 to ms '11' for the allowed
If set to 'SIB4'values
rootseqIndex
prsConfigurationIndex then a are MOC IAFIM
204..526
= 151 … 157 need - 320 to bems - Draft Version A
present.
- forprsConfigurationIndex
for
nCellChgHigh prachCS set must to be '12'greatr
the allowed or equal to Draft Version A
If set
rootseqIndex
= 471…
nCellChgMed to 'SIB5'
477 -valuesthenms
640 a areMOC IRFIM need to be
for264..566
nCellChgMed must to be '13'smaller
present. or equal to Draft Version A
- for prachCS set
prsConfigurationIndex the allowed
nCellChgHigh
If
no1111 set to
relations'SIB6' then a MOC UFFIM need to be
rootseqIndex
=
Note: If… 1117values
nCellChgHigh - 1280are ms 328..498
is set forto same value Draft Version A
present.
-no forrelations
prachCS
prsConfigurationIndex
than nCellChgMed, set to the '14' highthe allowed
mobility state
Note:
If set If nCellChgHigh
to 'SIB7' then a areMOCis set to same
GFIM need value Draft Version A
rootseqIndex
=
does 2391 have … 2397 values
priority. where 384..450
si[x]Periodicity istothebe
than
present.
no relations nCellChgMed, the high mobility state Draft Version A
smallest periodicity value in all defined
does
If have priority.
noset to 'SIB8'
siMessagePeriodicity
relations then a MOC CDFIM need to be
Draft Version A
present.
3) If actOtdoa set to ‘false’ following condition
siMessageSibType
must be fulfilled - (max. 'SIB10' and 'SIB11' smaller
siWindowLen) must be LTE5 Radio bearer and S1 bearer establishment Draft Version A
present
or equalintosibSchedulingList
(smallest si[x]Periodicity) if actETWS / (# ofis set and
LTE5release (optional)
Radio bearer and S1 bearer establishment Draft Version A
to
SIBs (sets in structure sibSchedulingList +2)); and release (optional)
If ulsSchedMethod is set to 'channel aware'
'true'. LTE46 Channel aware scheduler (UL) Draft Version A
where
then si[x]Periodicity is the smallest periodicity
siMessageSibType
If
value ulsSchedMethod
in all defined 'SIB12'
is set to must
'channel
siMessagePeriodicity be present in LTE27 Open loop UL power control and DL power Draft Version A
srsConfiguration
sib-
aware' srsPwrOffset must is be present and
mandatory setting
4) If
configured. any sibSchedulingList contains SIB10 the LTE473(optional),
ExtendedLTE540 Sounding
DRX settings reference
(standard) Draft Version A
SchedulingList
required,
siWindowLen in allvalueif actCMAS
other settings
shall not is forsetless
be to 'true'.
than 3ms signal in normal frames (standard)
the
If
Each srsConfiguration
dlMimoMode
ulsSchedMethod SIBx shallisappear set range notdenpends
to value more thanon
'SingleTX', once the in LTE40 Physical & transport channels (optional) Draft Version A
uplink
syncSigTxMode
the default value must is used also also be set to
channel LTE39 System information broadcast (optional) Draft Version A
instead. bandwidth:
'SingleTx'
sibSchedulingList.
-If ifdlMimoMode
ulChBw is set to '5MHz' then
is set to some another value LTE39 System information broadcast (optional) Draft Version A
srsConfiguration
than 'SingleTX', syncSigTxMode can be set to LTE50 UE state management (optional) Draft Version A
must
'SingleTx' be within range 1...4
or 'TXDiv'
- if ulChBw is set to '10MHz' then
srsConfiguration
must be within range 1...8
- if ulChBw is set to '15MHz' then
srsConfiguration
must be within range 1...4
- if ulChBw is set to '20MHz' then
If adjWInfList is not empty then t304InterRAT LTE56 Inter RAT handover to WCDMA (optional) Draft Version A
must
- be 100ms...8000ms. LTE873 SRVCC to GSM Draft Version A
LTE53 Intra and inter eNB handover with X2 Draft Version A
(optional)
LTE442 Network Assisted Cell Change to GSM Draft Version A
(optional)
LTE39 System information broadcast (optional) Draft Version A
LTE39 System information broadcast (optional) Draft Version A
- LTE487 Idle mode mobility load balancing Draft Version A
LTE1043 3GPP baseline R10 06/2011 (standard) Draft Version A
LTE5 Radio bearer and S1 bearer establishment Draft Version D
If ulsSchedMethod is set to 'channel and
LTE5release (optional)
Radio bearer and S1 bearer establishment Draft Version A
aware' or 'interference aware' the timer and
LTE5release (optional)
Radio bearer and S1 bearer establishment Draft Version A
tPeriodicPhr must be set to value different and release (optional)
to 'infinity'. LTE5 Radio bearer and S1 bearer establishment Draft Version A
and release
LTE39 (optional)
System information broadcast (optional) Draft Version A
LTE533 Mobility Robustness (standard) Draft Version A
LTE81-a Simplified Timing Advance Mechanisms Draft Version A
taTimerMargin must be less than or equal to (optional)
LTE41 PDCP, MAC & RLC support (optional) Draft Version A
(taTimer-300ms)
taTimerMargin must be less or equal to LTE81 Cell range up to 13 km (optional) Draft Version A
if(taTimer taTimer- is less than 1280, drxLongCycle
300ms)
must be set to 40 LTE49 Paging (optional), LTE39 System Draft Version A
If threshServingLowQR9 is configured the information
LTE1036 RSRQ broadcast
Based(optional)
Cell Reselection Draft Version A
following condition need to be fulfilled in scope (standard) LTE39 System information broadcast (optional) Draft Version A
of the LNCEL instance
threshold2a must be
- cellSelectionInfoV920 is mandatory required less than threshold1 Draft Version A
threshold3
-If utraFrqQThrHighR9
an instance must be less
of LNRELG and than threshold1in- the LTE442 Network Assisted Cell Change to GSM
utraFrqQThrLowR9
is configured Draft Version A
applicable
of all existing
LNCEL then if threshold2a
UFFIM instances
threshold2GERAN is set to 98 be 0...97.
belonging
must to
threshold2a
('notUsed')
the LNCEL must be are
instance greater
mandatorythan equal to (optional)
orrequired LTE55 Inter-frequency handover (optional) Draft Version E
threshold2GERAN
threshold2InterFreq must be less
threshold2InterFreq than or equal
must
- interFrqQThrR9
If
to an instance of LNRELW
threshold2a. of all IRFIM instances in the LTE56 Inter RAT handover to WCDMA (optional)
is configured Draft Version A
be
belonging greater to must
the LNCEL instance ifis one
LNCEL
threshold2GERAN then threshold2Wcdma
must be must
greater mandatory
beof
than 0..97.
threshold2a
than or equalmust be set to
to threshold3InterFreq 0...97 the LTE56 Inter RAT handover to WCDMA (optional),
If actIfHo Draft Version E
required
threshold2a
b2Threshold1GERAN. be greater than or equal to LTE55 Inter-frequency handover (optional),
following
of LNBTS condition
is enabled applies:
then threshold2InterFreq
-threshold3 for
threshold2Wcdma. intFrBCList must and be less than threshold3a
intFrNCList modified SIB LTE442 Network Assisted Cell Change to GSM Draft Version E
-shall an instance of
be 0..97 aremust LNRELW is configured in the
size
b2Threshold1Utra
threshold3
LNCEL restrictionsmust be less applied be
than (see
less definition in (optional)
than
threshold3a Draft Version E
those
threshold2Wcdma.
-threshold4 parameter).
an instance of LNRELG is configured in the LTE761 Advanced target cell selection and
must be less than Draft Version A
LNCEL
threshold3InterFreq handover retry for intra frequency handover
no
-threshold4 relations
actIfHo is must
set tobe 'enabled' threshold1 must be (optional), LTE423 RRC connection release with Draft Version A
less than
greater
no relations
b2Threshold1GERAN than threshold2a. redirect (standard) Draft Version A
threshold2InterFreq
threshold4 must be less
ttiBundlingBlerTarget must be less than
than
is mandatory or equal
required if LTE907 TTI bundling (optional) Draft Version A
to threshold2a.is set to 'true'
b2Threshold1Utra
actTtiBundling
ttiBundlingBlerThreshold
threshold2Wcdma must be is mandatory
less than orrequired equal LTE907 TTI bundling (optional) Draft Version A
ifttiBundlingSinrThreshold
toactTtiBundling
threshold2a. is set to 'true' is mandatory required LTE907 TTI bundling (optional) Draft Version A
threshold2GERAN
if(1)actTtiBundling must
is set be
toare
'true'less than or equal
Following parameter
ttiBundlingBlerThreshold
to threshold2a. must dependent
always be LTE40 Physical & transport channels Draft Version A
on
greater the setting
than of the
ulTargetBler.
only if ulCombinationMode is set to 'MRC' ulChBw (in PRB) (optional),
LTE979 IRC LTE113
for 2 RXCellpaths
Bandwidth - 15
Draft Version A
(1.1)
prachHsFlag if ulChBw can is set
be set to '5toMHz''true' MHz (standard), LTE106 6 cell support
- nCqiRb is limited to 25 LTE40
with onePhysical
System&Module
transport channels (optional)
(standard), Draft Version A
- prachFreqOff is limited to 19 LTE1072 Flexi Lite BTS 750
LTE31-b Simplified BLER based (standard),
Link Adaptation Draft Version A
(channel bandwidth in PRB-6) LTE179-a CRL0665 Dual band operation
(optional)
- iniPrbsUl value range is restricted LTE31
with one System Module - 6*10Mhz (optional)
Link adaption by AMC (UL/DL) Draft Version A
to 1..25 (optional)
LTE31 Link adaption by AMC (UL/DL) (optional) Draft Version A
- srsConfiguration must be within LTE31 Link adaption by AMC (UL/DL) (optional) Draft Version A
1..4
(1.2) if ulChBw is set to '10 MHz' LTE27 Open loop UL power control and DL power Draft Version D
- nCqiRb
In is limited tois 50
case ulpcEnable FALSE, ulpcPuschEn setting (optional)
LTE28 Closed loop UL power control (optional) Draft Version A
-shall prachFreqOff is limited to
not be defined and the default value is 44
(channel bandwidth in PRB-6) LTE39 System information broadcast (optional) Draft Version A
used implicitly
-IniniPrbsUl
In case value
(ulpcEnable range is
case ulpcEnable is FALSE, ulpcPucchEn is
FALSE restricted
OR LTE28 Closed loop UL power control (optional) Draft Version A
to 1..50
ulpcPucchEn
shall not be is
defined FALSE) and ulpcLowlevCch
the default value shall
is
In case (ulpcEnable is FALSE OR LTE28 Closed loop UL power control (optional) Draft Version A
-used
not srsConfiguration
beimplicitly
definedisand must be within
the default value is used
ulpcPuschEn
In case (ulpcEnable FALSE) is ulpcLowlevSch
FALSE OR shall LTE28 Closed loop UL power control (optional)
1..8
implicitly
In case (ulpcEnable is FALSE OR Draft Version A
not be defined
ulpcPucchEn and
isis FALSE)the default value is used
ulpcLowqualCch shall
(1.3)
ulpcLowlevCch
(ulpcPuschEn
In case if ulChBw
(ulpcEnable is
<= set
FALSE istoFALSE
'15
ulpcUplevCch
AND MHz'ulpcPucchEn
OR is LTE28 Closed loop UL power control (optional) Draft Version D
implicitly
not be defined and the default value is used
- nCqiRb ulpcSinrMax
FALSE))
ulpcPuschEn is limited
is to 75
FALSE) shall not be
ulpcLowqualSch defined and LTE28 Closed loop UL power control (optional)
shall
ulpcLowlevSch
In case
implicitly ulpcEnable <= ulpcUplevSch
is FALSE, ulpcPucchEn Draft Version A
-not
the prachFreqOff
default
be definedvalue is is
and limited
used
the to 69 value is used
implicitly
default
shall
(channel not
ulpcLowqualCch be defined
bandwidth
ulpcEnable <=isand the
ulpcUpqualCch
in PRB-6)
FALSE, default value is
ulpcPuschEn LTE28 Closed loop UL power control (optional)
In case
implicitly (ulpcEnable is FALSE OR Draft Version A
used
shall implicitly
-ulpcLowqualSch
iniPrbsUl
not be value
defined range and istherestricted
default value is is
(ulpcPuschEn is FALSE
<= AND
ulpcUpqualSch ulpcPucchEn
In
to case
used 1..75 (ulpcEnable is FALSE OR
implicitly
FALSE)) ulpcSinrMin shall notulpcPucchEn
be defined and
(ulpcPuschEn
-the
In srsConfiguration
case (ulpcEnable is FALSEmust AND
be
is FALSE within OR is
default value is used implicitly
FALSE))
1..4
ulpcPuschEn ulpcSinrMax
is FALSE) shall not
ulpcUplevSch be defined
shalland
In case (ulpcEnable is FALSE OR
the
(1.4)
not default
be if defined
ulChBw value is
isFALSE
and setused
the implicitly
todefault
'20 MHz' value is usedis
(ulpcPuschEn is AND ulpcPucchEn
In case (ulpcEnable
- nCqiRb
implicitly is not limited is FALSE OR
FALSE)) ulpcRssiMax shall not be defined and
(ulpcPuschEn
-the
InprachFreqOff
case (ulpcEnable isisFALSE
limited
is FALSEAND
to 94ulpcPucchEn
OR is
default value is used implicitly
FALSE))
(channel ulpcSinrMin
bandwidth in shall not be defined and
ulpcPuschEn
In case (ulpcEnable is FALSE) is PRB-6)
ulpcLowlevSch
FALSE OR shall
LTE27 Open loop UL power control and DL power Draft Version A
In case (ulpcEnable is FALSE OR setting (optional)
LTE28 Closed loop UL power control (optional) Draft Version A
(ulpcPuschEn
If ulsSchedMethod is FALSE
is setAND ulpcPucchEn
different to 'channel is LTE46 Channel aware scheduler (UL) Draft Version A
FALSE))
aware' ulpcReadPeriod
this parameter must shall
be not to
set befalse.
defined
In
and case
the (ulpcEnable
default valueisisFALSE OR
used implicitly LTE28 Closed loop UL power control (optional) Draft Version A
ulpcPucchEn is FALSE)
In case (ulpcEnable is FALSE OR ulpcUplevCch shall LTE28 Closed loop UL power control (optional) Draft Version D
not
ulpcPuschEnbe definedisand the default
FALSE) value is used
ulpcUplevSch shall
In case (ulpcEnable is FALSE OR
implicitly LTE28 Closed loop UL power control (optional) Draft Version A
not
ulpcPucchEnbe definedisand the default
FALSE) value is used
ulpcUpqualCch shall
ulpcUplevCch
In case (ulpcEnable
implicitly >= ulpcLowlevCch
is FALSE OR LTE28 Closed loop UL power control (optional) Draft Version D
not
ulpcPuschEnbe defined is and the
FALSE) default value is used
ulpcUpqualSch shall
ulpcUplevSch
If ulsSchedMethod
implicitly >= ulpcLowlevSch
is set to 'interference LTE7 Support of multiple EPS bearer (standard) Draft Version A
not
aware' be defined and aware'
the default value is used
If ulsFdPrbAssignAlg is setulsFdPrbAssignAlg
ulpcUpqualCch
implicitly
or 'channel >= ulpcLowqualCch
to 'Round- LTE10 EPS bearers for conversational voice Draft Version A
must
RobinFD' be set to
(packet'Mixed FD'.
aggregation is disabled (standard)
ulpcUpqualSch
The
If maximal
ulsFdPrbAssignAlg >=
value ulpcLowqualSch
of ulsMinRbPerUe
is set to 'RoundRobinFD' LTE571 Controlled uplink packet segmentation Draft Version A
for
depends VoIP bearer) ulsMaxPacketAgg
on the ulChBw: must (standard)
(packet
be toaggregation is LTE571 Controlled uplink packet segmentation Draft Version A
forset
-disabled ulChBw‘1’. set to '5MHz',
for VoIP bearer) ulsMaxPacket-ulsMinRbPerUe is (standard)
If
limited
Agg ulsSchedMethod
to maximal
must be set to25 is
‘1’.set to 'channel aware' LTE619 Interference aware UL scheduling Draft Version A
following
-upperMarginCIO
for ulChBw condition
set to is need
'10MHz', to beulsMinRbPerUe
mandataory fullfilled
required - if (standard)
LTE1140 Intra-frequency load balancing Draft Version A
srsConfiguration
is limited
actIntra- to maximal is mandatory
50 required
-FreqLoadBal
srsPwrOffset LTE1195 FHCC Repeater Interface Draft Version A
for ulChBw set isisset
mandatory
to to 'true'. required
'15MHz', ulsMinRbPerUe
Module (standard), LTE1195-e FHCC
-isulpcSrsEn is mandatory
limited to maximal 75 required
If ulsSchedMethod
- for is set to 'interference
ulChBw set to '20MHz', ulsMinRbPerUe Repeater Interface Module -Info model
aware' or 'channel aware' all of the following
is not limited update and merge for RL40 (standard)
condition must be filfilled:
- ulsFdPrbAssignAlg must be set to 'Mixed FD'
- tPeriodicPhr is not allowed to be set to
'infinity'.
PLMN listId siMessagePeriodicity siMessageRepetition siMessageSibType
1 160ms (1) 1 Sib6 (4)
VF 2 160ms (1) 1 Sib7 (5)
3 160ms (1) 1 Sib5 (3)
1 160ms (1) 1 Sib6 (4)
O2
2 160ms (1) 1 Sib7 (5)
Abbreviated Name Full Name
Draft Version A
Draft Version A
Draft Version C
Draft Version C
Abbreviated Name Full Name
O2 1 1 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119
20 21 22 23 24 25 26 27 28 29 30 31 32
97 99
2s 2s no relations
- - no relations
- - no relations
1 1 If SIB6 is set in any of si(x)Map
10712 2938 10637 2963 The parameter dlCarFrqUtra must be set uniquely in all inst
- - - - Carriers in different RATs must
24 dBm 24 dBm 24 dBm 24 dBm have
no relations different Cell Reselection
Priority (According to 3GPP
-13 dB -13 dB -13 dB -13 dB no relations
36.304),
-115 dBm -115 dBm -115 dBm -115 dBm no
i.e. relations
the
4 4 4 4 idleLBUtranFddCelResPrio
uCelResPrio must be unequal in to the setting of
- - - - -UFFIM instance
cellReSelPrio inmust
utraFrqQThrHighR9 is mandatoryeach be unique
LNCEL instance,
-compared
eutCelResPrio
required to the setting
in each
if threshServingLowQR9of
IRFIM instance,
- - - - utraFrqQThrLowR9 is mandatory
idleLBCellReSelPrio
-ofgCelResPrio
the LNCEL in each in
instance the instance,
GNFL
this
0 dB 0 dB 0 dB 0 dB required
no if
relations threshServingLowQR9
-LNCEL
UFFIM this UFFIM
hrpdCResPrio
belongs to instance
in each
is CDFIM instance,
configured.
of the LNCEL instance this
8 dB 8 dB 8 dB 8 dB -belongs
no rttCResPrio
relations in each CDFIM instance
UFFIM belongs to is configured.
-utraFrqQThrHighR9
idleLBEutCelResPrio in each
is mandatory
IRFIM
required instance belonging
if utraFrqQThrLowR9 to the
in
utraFrqQThrLowR9 is mandatory
same LNCEL
this utrFddCarFrqL list set is in
required if utraFrqQThrHighR9
- idleLBGeranCelResPrio in each
configured.
this utrFddCarFrqL list set is
GNFL instance belonging to the
configured.
same LNCEL
- idleLBHrpdCelResPrio in each
CDFIM instance belonging to the
same LNCEL
- idleLBRttCelResPrio in each
CDFIM instance belonging to the
same LNCEL
Related features Change Control
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Abbreviated Name Full Name
targetCarrierFreq must be
omitted in the ANRPRL instance
with anrPrLId=0 (default profile).
In all other ANRPRL instances
the targetCarrierFreq must be
configured.
Related features Change Control
This is the unique ID of the neighbor eNB Not modifiable 0...1048575, step 1
within PLMN, where
This parameter holdsadjEnbId
the C-Plane and IP
plmnId On-line 7...15 characters
form
address the neighbor
of this adjacent global eNB
eNB. ID.
The parameter determines whether the C- On-line oamControlled (0), enbControlled (1)
Format:
Plane IP the formatofofthe
address thisneighbor
parameter eNB allows
(X2 Not modifiable
Mobile Country Code in PLMN identity 0...999, step 1
for
link)anisIPv4 IP address
statically configured in theordotted
whether eNB
included
MME group in GU group ID.inMCC
ID included and MNC
GU group ID.
decimal
is allowed form.
to
build a unique PLMN ID. update the address based on Not modifiable 0...65535, step 1
Value
Mobile 0.0.0.0
Network means
Code the
in Control
PLMN
information provided by ANR procedures. Not modifiable plane
identity IP 0...999, step 1
address
included
oamControlled
This isin not
parameter GUdefined.
group
X2 link:ID. MCC
determines the and
rangeMNC of Not modifiable 2...3, step 1
build
It is
MNC. thea unique PLMN of
responsibility ID.the operator to
This is the instance identifier of the object Not modifiable 0...63, step 1
configure
LNADJ. the parameter
This correct cPlaneIpAddr.
appears onlyInin the
Mobile Country Code in the primary PLMN
terms of
distinguished the limitation
name (DN)to maximum
inand
theMNC 32
plan buildX2 Not modifiable
file
0...999, step 1
ID of
Mobile neighbor
Network eNB.
Code MCCin the primary PLMN Not modifiable 0...999, step 1
links
andPLMNisoam
used controlled
for O&Mlinks have priority.
purposes.
the
ID of the ID.
neighbor eNB. MCC and MNC
The
It MNC length
is highly recommendeddetermines the for
to use range of Not modifiable
object 2...3, step 1
build the
enbControlled
MNC in thePLMNX2 ID.link:
creation
The the primary
parameter lowest
providesPLMN
free ID. value within Not modifiable
lnAdjId
information unavailable (0), available (1)
The
whetherIP address
all LNADJ the instanceswill be
X2 link maintained
isofsuccessfully
an eNB. This by isANR
to
procedures
avoid rejection of plan file activation due toIt
established. if ANR features are activated.
is the default
colliding lnAdjId value
valuesfor neighbor
if an LNADJ eNBs
which have
instance been learnt via
is automatically ANR by eNB
created
procedures.
because of activated ANR features.
NSN Default VF Default Shared
- - -
- - -
oamControlled (0) enbControlled (1) enbControlled (1)
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- No Default No Default
Parameter relationships Related features
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Abbreviated Name Full Name Description
234 no relations
10 The actual range depends on the MNC length: if length=2, then range is 00...99, if length=
2 Determines
The length
global cell of MNC
idendity of the adjacent LTE cell LNADJL must be unique for all LNADJL and LNCE
- global LNADJL ID (ecgiAdjEnbId + ecgiLcrid + ecgiPlmnId) must be different to
- other global LNADJL identity (ecgiAdjEnbId + ecgiLcrid + ecgiPlmnId) AND
-
-The
global LNCEL
global identity of
cell idendity (lnBtsId (LNBTS)
the adjacent LTE+ lcrId (LNCEL)must
cell LNADJL + mcc
be(LNBTS) + mnc
unique for (LNBTS)+
all LNADJL andmncLe
LNCE
50nrb (3) no relations
global LNADJL ID (ecgiAdjEnbId + ecgiLcrid + ecgiPlmnId) must be different to
- The ecgiAdjEnbId
- other global LNADJLvalueidentity
must match with the adjEnbId
(ecgiAdjEnbId value
+ ecgiLcrid of the superior
+ ecgiPlmnId) ANDLNADJ object.
- - global LNCEL identity (lnBtsId (LNBTS) + lcrId (LNCEL) + mcc (LNBTS) + mnc (LNBTS)+ mncLe
- no relations
- The actual range depends on the MNC length: if length=2, then range is 00...99, if length=
- Determines length of MNC.
6400
24400 no relations
-
-
No Default
-
-
-
-
- no relations
Related features Change Control
Draft Version A
LTE724-a RROM support of Neighbor
C length: if length=2, then range is 00...99, if length= Draft Version A
Cell Configuration
LTE724-a (standard)
RROM support of Neighbor
LTE1060 TDD - FDD handover Draft Version A
Cell Configuration (standard)
(standard)
LTE1060 TDD - FDD handover Draft Version A
(standard)
LTE724a RROM support of Neighbor Draft Version A
Cell Configuration
LTE782 (optional)
ANR - Intra-LTE, Intra- Draft Version A
frequency - Fully UE based
LTE782 ANR - Intra-LTE, Intra-(standard) Draft Version A
frequency - Fully UE based (standard) Draft Version A
Draft Version A
LTE724-a RROM support of Neighbor
C length: if length=2, then range is 00...99, if length= Draft Version A
Cell Configuration (optional), LTE782
ANR - Intra-LTE, Intra-frequency - Draft Version A
LTE724a RROM support of Neighbor
Fully UE based
LTE724a RROM(standard)
support of Neighbor Draft Version A
Cell Configuration
LTE724a (optional),
RROM support LTE782
of Neighbor
Cell Configuration
ANRConfiguration (optional)
- Intra-LTE, Intra-frequency - Draft Version A
Cell (optional),
LTE724a RROM support of Neighbor LTE782
Fully -UE
ANR based (standard)
Intra-LTE, Intra-frequency - Draft Version A
Cell Configuration
LTE724-a (optional),
RROM support LTE782
of Neighbor
Fully
ANR UE based (standard)
- Intra-LTE, Intra-frequency - Draft Version A
Cell Configuration
LTE724a (standard)
RROM support of Neighbor
Fully UE based
LTE1060 TDD - (standard)
FDD handover Draft Version A
Cell Configuration
LTE724-a (optional),
RROM support LTE782
of Neighbor
(standard)
ANR - Intra-LTE, Intra-frequency - Draft Version A
Cell Configuration (standard)
Fully UE based
LTE1060 TDD - (standard)
FDD handover Draft Version A
(standard)
LTE724-a RROM support of Neighbor Draft Version A
Cell Configuration
LTE724a (standard)
RROM support of Neighbor Draft Version A
Cell Configuration (optional) Draft Version A
Abbreviated Name Full Name Description
cellIndOffNeigh Cell individual offsets of other neighbor Cell Individual Offset
cellIndOffNeighDelta cells
Cell individual offset delta for load (CIO) of Neighbor
The parameter
balancing cells
provides for insertion
the delta into
ecgiAdjEnbId Identity of eNB in ECGI of related This parameter is the
the CIO Cell
value, eNB identifier List of
ecgiLcrId neighbor
Identity ofcell
cell in ECGI of related Macro
This parameter
EUTRA
which is Servingisorthe
neighbor cell which
cell is temporarily
part of
identifier, the E-
which is
ecgiPlmnId - mcc MCC in primary PLMN identity Neighbor
Mobile
added Carrier
Country
toCell
the Code
UTRAN
part ofprimary
the E-UTRANGlobal
ecgiPlmnId - mnc MNC in primary PLMN identity Measurement
of
Mobilethe
operator configured
Network Object.
PLMN
Code cell
Identifier
Cell Global (ECGI)
Identifierof the
All
ID, CIOs
which
individual
of the different
primary is part
offset PLMNoffrom
the
ecgiPlmnId - mncLength MNC length in primary PLMN identity (ECGI)related
This neighbor
parameter cell.
zero
E-UTRAN
(LNREL
ID, willofparameter
which be the related
isCell
partGlobal
of the
handoverAllowed Handover allowed determines
neighbor
The parameter cell.the length
controls
considered
Identifier
E-UTRAN by
(ECGI)
cellIndOffNeighDelta) Cell eNB of the
Global for
of MNC.
handover blacklisting.
lnRelId LTE neighbor relation identifier Measurement
related
This
for load
Identifier neighbor
parameter(ECGI)isof
balancing cell.
thethe
The
naming instance
Configuration attribute of
(up LNREL
oftothe a
nrControl Neighbor relation control reasons.
related
The neighbor
parameter cell.
and
limit
MOC the
of 32related
LNREL. CIOs cell
per
nrStatus Neighbor relation status coordinates
Indicates thethe access
status of
relationship,
carrier
It frequency). defined aby
touniquely
the parameter
neighbor
identifies
relation.
ECGI,
If identifies
this parameter
LNREL instance. isi.e.the
handoverAllowed,
specific
modified,
It is highly cell
theto cell
whether
unavailable: handover
relation.
LNREL
recommended The Indicates
parameter parameter
to use
blacklisting
that theHO setting
neighbor at
allows
cellIndOffNeighDelta
for object for this the
creation
this
relationinstanceisrelation,
not of LNREL
neighbor
is implicitly
lowest set to 0.only
and thefree
considered
lnRelId
related
for cell
HO (for
S1 HO
value within allor no HO at
LNREL all.
relationship,
example because is only
The
instancesblacklistingsubordinateapplies
allowed
neighbor tocell
be done
in addition
to an LNCEL to object.
manually
information via by isthe
not
blacklisting
This is to avoid the
operator
available). or also
LNCEL
rejection parameter
of plan
automatically by file
NetAct
blacklistHoL.
activation due to
available: Indicates that
colliding lnRelId values
the neighbor relation is as isis
ifThe
an meaning
LNREL instance
considered
follows: for HO if
automatically created
not blacklisted,
'allowed' meansthat that is if
by eNB because of
handoverAllowed
any S1 or X2 outgoingis not
activated ANR
set to Forbidden.
handover
features. is allowed.
'onlyS1' means that
The
outgoiingnrStatus of a via
handover
blacklisted
S1 is allowed neighbor
but not
relation
via X2. may be
nevertheless
'forbidden' means Available.that
This
no outgoing S1that
indicates or X2 all
information
handover is for HO is
triggered.
available and HO
would be in principle
possible if blacklisting
would be released.
Modification Range and step NSN Default VF Default
On-line -24dB (0), -22dB (1), -20dB (2 0dB (15) 0dB (15)
Not modifiable -48... 48 dB - 0 dB
Not modifiable 0...1048575, step 1 - -
Not modifiable 0...255, step 1 - -
Not modifiable 0...999, step 1 - 234
Not modifiable 0...999, step 1 - 15
Not modifiable 2...3, step 1 - 2
On-line allowed (0), forbidden (1), onl allowed (0) allowed (0)
Not modifiable 0...388, step 1 - -
On-line automatic (0), manual (1) automatic (0) automatic (0)
Not modifiable unavailable (0), available (1) - -
TEF Default Parameter relationships Related features Change Control
0dB (15) LTE971 Intra-LTE Draft Version A
0 dB mobility
LTE1140offsets
Intra- Draft Version A
(standard)
frequency load
- The global cell identity of the LNREL LTE782object
ANR must
- beDraft different to the
Version A cell global identity of the parent LNC
LNREL cell global identity balancing+Intra-
(ecgiAdjEnbId
Intra-LTE, ecgiLcrId + ecgiPlmnId)
- The global cell identity of the LNREL LTE782object
ANRmust
- beDraft different A must
to the
Version be different
cell global identityfrom theparent
of the LNCEL gl
LNC
It is sufficient that one of the elements
frequency
LNREL cell global identity (ecgiAdjEnbId is different.
- Fully
Intra-LTE,+Intra-
ecgiLcrIdDraft
+ ecgiPlmnId)
234 Version A must be different from the LNCEL gl
UE
It is sufficient that one of the elements based
frequency
is different.
- Fully
10 The
The actual range
global cell depends
identity of allonLNREL
the MNC length:of
(standard)
instances if leng
theDsame
raft Version A be unique, i.e.
cell must
UE based
2 LNREL
Determines
The cell global
length
global cell identity
of MNC.
identity (ecgiAdjEnbId
of all LNREL +ecgiLcrId +
instances of theDraft
(standard) ecgiPlmnId)
same Version A must
cell must be unique
be unique, i.e. within all the LNREL
allowed (0) LNREL cell global identity (ecgiAdjEnbId
LTE771 +ecgiLcrId Draft + ecgiPlmnId)
Version A must be unique within all the LNREL
- Optimization
LTE782 ANR - of Draft Version A
Intra-LTE Intra-
Intra-LTE,
automatic (0) LTE771 Draft Version A
neighbor
frequency relations
- Fully
- Optimization
LTE1383 ANR of Draft Version A
(standard)
UE based
Intra-LTE
Robustness
(standard),
neighbor relations
(standard)
LTE106 6 cell
(standard)
support with one
System Module
(standard)
Abbreviated Name Full Name Description
Draft Version A
Draft Version C
Draft Version C
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Version 1.1
Draft Version A
redirGeranArfcnValueL
redrtId
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
VF 0 65535
1 65535
2 63 65 67 69 71 73 75 76 77 79 81 83 84 85 87 89 91 93
redirGeranArfcnValueL
redrtId
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
TEF 0 65535
1 65535
2 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118
ValueL
19 20 21 22 23 24 25 26 27 28 29 30 31 32
95 97 99
ValueL
19 20 21 22 23 24 25 26 27 28 29 30 31 32
accMmePlmnsList - mcc MCC of PLMN ID in served PLMNs per RAT Mobile Country Code of
accMmePlmnsList - mnc of
MNCMMEof PLMN ID in served PLMNs per RAT PLMN
Mobile ID included
Network in served
Code of
of MME PLMNs
PLMN IDper RAT
included of MME.
in served
accMmePlmnsList - mncLength MNC length of PLMN ID in served PLMNs Determines the range of
MCC
PLMNs andperMNC
RATbuild
of MME.a
ipAddrPrim per RAT IPv4
Primary of MMEaddress Mobile
This Network
parameter Code
holds of
the
unique
MCC PLMN
and MNC ID.
build a
PLMN
transportID included
network in served
IPv4 IPv4
ipAddrSec Secondary IPv4 address Secondary
unique PLMN application
ID.of MME.
PLMNs
addressper RAT
of the
the Mobility
lnMmeId LTE mobility management entity identifier address of Mobility
This parameter is naming
Management
Management Entity
Entity (MME)
(MME)Itif
mmeName MME name attribute of MOC
This is ainterface.
human LNMME.
readable
primary
multihoming feature is
shouldofbethe
name usedMME.for unique
relMmeCap Relative MME capacity This parameter
enabled. indicates the
identification of MME in eNB.
s1LinkStatus S1 link status Format:
relative
The IPv4 address
MME
This parameter
address capacity
field is a Read-
provides
parameter
assigned
Only field.
information toin dotted
the MME.
whether the
transportNwId Transport network identifier This parameter
decimals. holds theS1
link is successfully
identifier for the transport
established.
network in case "Transport
Separation for RAN sharing"
feature is supported.
Actual range depends on mncLength: if mncLength=2 then range is 00...99, if mncLength=3 then rang
The value of mncLength determines whether the mnc is of 2 digits or 3 digits length.
The combination of LTE775 SCTP multi-
ipAddrPrim and transportNwId homing
LTE775 (standard)
SCTP multi-
must be unique in all LNMME homing
LTE2 S1(standard)
Flex (optional)
instances, i.e. per each LTE505
LTE2 S1Transport
Flex (optional)
configured transport network Separation for RAN
LTE505 Transport
the IP address must be Sharing (optional)
Separation for RAN
unique. Sharing (optional)
Per configured transportNwId LTE505 Transport
the ipAddrPrim must be Separation for RAN
unique in all LNMME Sharing (optional)
instances.
Measurement interval for Ethernet On-line disabled (0), 15min ( 15min (15)
interface statistics
Measurement measurement
interval for Ethernet inLink On-line disabled (0), 15min ( 15min (15)
minutes. Acceptable
measurement in Range
minutes. is
Acceptable
Measurement interval for IPSec On-line disabled (0), 15min ( 15min (15)
0/15/30/60/360/720/1440
Range minutes,
is 0/15/30/60/360/720/1440
measurement
Measurement in minutes.
interval Acceptable
for IP Filtering On-line disabled (0), 15min ( 15min (15)
where
minutes, '0' means disabled. The
Range is where
measurement in
'0' means disabled.
0/15/30/60/360/720/1440
minutes. Acceptable
parameter
Measurement
The paramter supports
intervalFTLB
for and
IP FTIB
Statistics On-line disabled (0), 15min ( 15min (15)
minutes,
range wheresupport FTLB
'0' means
is 0/15/30/60/360/720/1440
and FTIB
disabled.
HW.
measurement
HW Values.
Measurement in minutes.
interval Acceptable
forFTLB
L2 switch On-line disabled (0), 15min ( 15min (15)
The parameter
minutes, supports and
Range is where
statistics
'0' means disabled.
0/15/30/60/360/720/1440
FTIB HW.measurement
Measurement
The parameter interval
supports
in PHB
for minutes.
FTLB and On-line disabled (0), 15min ( 15min (15)
minutes,
Acceptable where
Range'0' means
is disabled.
Statistics
FTIB HW.measurement
Measurement interval for inTAC
minutes.
statistics On-line disabled (0), 15min ( 15min (15)
The paramter support
0/15/30/60/360/720/1440 FTLB and
minutes, FTIB
Acceptable Range
measurement in is
minutes. Acceptable
HW Values.
Measurement interval for
where '0' means disabled.minutes, TOP
The On-line disabled (0), 15min ( 15min (15)
0/15/30/60/360/720/1440
Range is 0/15/30/60/360/720/1440
FreqSync
parameter statistics
supports measurement
FTIB HW in
Measurement
where
minutes, '0' means interval
disabled.
where '0' means Theunit.
for TWAMP
disabled.
On-line disabled (0), 15min ( 15min (15)
minutes. Acceptable
statistics measurement Range
in is
minutes.
parameter
Measurement
The paramter supports
interval
support FTLB
for
FTLB and
VLAN FTIB
and IP
FTIB On-line disabled (0), 15min ( 15min (15)
0/15/30/60/360/720/1440
Acceptable Range is inminutes,
HW.
Statistics
HW Values.
Measurement measurement
interval minutes.
for VLAN PHB On-line disabled (0), 15min ( 15min (15)
where '0' means disabled.
0/15/30/60/360/720/1440 The
Acceptable
Statistics Range is inminutes,
measurement minutes.
parameter
Measurement
where '0' supports
means intervalFTLB and
for VLAN
disabled. FTIB On-line disabled (0), 15min ( 15min (15)
0/15/30/60/360/720/1440
Acceptable Range is minutes,
HW.
interface
This statistics
parameter measurement in
where '0' meansidentifies
disabled.the
0/15/30/60/360/720/1440 minutes,
Not modifiable 1 to 1 number, step 1
minutes. Acceptable
performance managementRange is
where '0' means disabled.minutes,
0/15/30/60/360/720/1440
measurement configuration within BTS
where '0' means
Transport. disabled.
The value is always 1.
emplate (Phil)
Abbreviated Name Full Name Description
netActIpAddr
omsTracePortNum
tceTracePortNum
Modification Range and step NSN Default VF Default Shared Default
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Based on Site Design Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
No (Phase 2 Yes) Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version C
Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Yes (in Phase 2) Draft Version A
Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
No Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
No (Open Loop) Draft Version A
Draft Version A
Draft Version A
Draft Version A
No Draft Version A
??? Draft Version A
??? Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Yes (Phase 2) Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Yes (Site Design) Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
Yes Draft Version A
Yes Draft Version A
Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Yes Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Yes Draft Version A
Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
??? Draft Version A
??? Draft Version A
No Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
??? Draft Version A
Draft Version A
??? Draft Version A
??? Draft Version A
Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
Yes (Not supported in MME) Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
No (Trial/Optimisation phase) Draft Version A
No (Trial/Optimisation phase) Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
No (Technical discussion) Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Yes (Technical discussion) Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
no (Security design) Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
No (Phase 2 yes) Draft Version A
No Draft Version A
??? Draft Version A
Draft Version A
??? Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
??? Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
No (Phase 2 yes) Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Draft Version A
Refer 3G LLD V1.24
SIB19Priority RNC 3
Parameter Object
lteAdjCellIndex ADJL
earfcn ADJL
lteAdjCellMinBand ADJL
lteAdjCellMinRxLevel ADJL
lteAdjCellMcc ADJL
lteAdjCellMnc ADJL
lteAdjCellPriority ADJL
lteAdjCellReselectLowerThr ADJL
lteAdjCellReselectUpperThr ADJL
lteAdjCellTac ADJL
gsmPriority BTS
timeHysteresis BTS
reselectionAlgorithmHysteresis BTS
prioritySearchThr BTS
lowPriorityThr BTS
wcdmaPriority BTS
utranThresholdReselection BTS
utranQualRxLevelMargin BTS
1
10s (1)
Disabled (0)
15 Not Used
15 Not Used
4
0 dB
-115 dBm
Vodafone
Enabled