Opening OP5600
Instruction Manual
www.opal-rt.com
1751 Richardson, suite 2525
Montréal (Québec) Canada H3K 1G6
www.opal‐rt.com
© 2012 All rights reserved
Printed in Canada
2
Contents
NEEDED EQUIPEMENTS ..................................................................................................................................4
OPENING OP5600 ...........................................................................................................................................5
INTERNAL PART LOCATION .............................................................................................................................6
MOTHERBOARD LED .......................................................................................................................................8
3
NEEDED EQUIPEMENTS
Screw‐driver kit required
4
OPENING OP5600
1. Make sure the system is turned off and the power is disconnected.
2. Wear an anti‐static wrist strap.
3. To open the chassis. locate and unscrew the screws as shown below:
Back
Front
4. Lift the case from the front in the direction shown by the arrow.
(The back side has DB37 ports)
Front
Back
5
Northbridge Battery PCI &PCIe Hard Drive LED
Power Supply LED
RAMs CPUs
6
FPGA PCIe connexion FPGA (ML605) FPGA USB JTAG
7
MOTHERBOARD LED
Constant LED
Flashing LED
8