Introduction
Welcome
To
FrameWin
FrameWin is a windows based software having all the facilities available in a GUI. Interfacing with other
Windows based program providing additional flexibility. This version is based on the principles used in the
DOS Version of the software. Also new Features has been added making this altogether a totally new
package.
Key Features of the Software are Noted down below. Also in-depth details of each of the features are given in
the pages to follow
Option to create Legged Columns ie. L Shape, T Shape, Y Shape, Plus Shape etc.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3544.htm 10/06/2018
introduction Página 2 de 2
Design of Footing
Design of Column
Design of Beam
Scrolling of Window
About US
Our Team
Disclaimer
Software \ Hardware Requirements
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3544.htm 10/06/2018
New Página 1 de 8
New
Enter the number of floors for which the new building file is to be created
Then select different plan files are to be selected for different Levels.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhD21F.htm 10/06/2018
New Página 2 de 8
Select the appropriate file according to the requirement of the floor for all the floors as shown
As seen the status window denotes whether this file is a valid file or not (i.e. whether the analysis is
completed for the selected file in PlanWin program)
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhD21F.htm 10/06/2018
New Página 3 de 8
As seen the status of all file is correct this means we can proceed further with the plan. Click on ok to
continue.
planwin@computerhelpindia.com www.computerhelpindia.com
Open
This option is used to open a particular Building File which is already created. (.blw File)
On clicking this option The file selection window appears and then select the required file
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhD21F.htm 10/06/2018
New Página 4 de 8
Save
This option is used to save the prepared Building File (.blw File)
If the file is being saved for the first time it will ask for file name and the destination
where it is to be saved as shown
Enter the appropriate file name and select the path where the newly created
file will be stored and click on save to continue.
planwin@computerhelpindia.com www.computerhelpindia.com
Save As
This option is used to save the existing open file with an different name.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhD21F.htm 10/06/2018
New Página 5 de 8
Enter the appropriate file name and click on save to save the open file with an different name.
planwin@computerhelpindia.com www.computerhelpindia.com
3D CAD format
The purpose of this option is to allow user to take printouts of the plan through CAD (i.e. for
customized and economical printing). This option is that it creates a CAD file which can be sent to any
client according to requirement.
On clicking the above option the entire drawing is transferred to CAD as shown
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhD21F.htm 10/06/2018
New Página 6 de 8
2D CAD format
2D export is useful when general layout drawing is required. This saves the draftsmen task of
redrawing the general Layout drawing.
Note :- All the different information's are exported to different layers in CAD, so the user can print the
necessary information by shuffling the layers.
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhD21F.htm 10/06/2018
New Página 7 de 8
Properties
This option is used to view the properties of file being opened \ saved .
On clicking this option an window appears as shown
planwin@computerhelpindia.com www.computerhelpindia.com
This list displays the last 4 files which were recently opened along with its path.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhD21F.htm 10/06/2018
New Página 8 de 8
planwin@computerhelpindia.com www.computerhelpindia.com
Exit
This option is used to Exit the Frame win program. Before exiting if the current file is not saved it will
prompt for saving.
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhD21F.htm 10/06/2018
Level Information Página 1 de 7
Level Information
This option is used to view the various Level Information of the building file (i.e. .blw file) being used.
On selecting this option an window appears as shown
Tick mark denotes that the file (i.e. .plw file) originally included in the
Building File (i.e. .blw file) is physically present in the original location from
where it was included.
The original file (i.e. .plw file) after being included in Building File (i.e. .blw
file) has not been modified after its inclusion.
Cross mark denotes that the file (i.e. .plw file) originally included in the
Building File (i.e. .blw file) is not physically present in the original location
from where it was included.
Dot mark denotes that the file (i.e. .plw file) originally included in the
Building File (i.e. .blw file) is physically present in the original location from
where it was included but modified after it was included in the building file.
The original file (i.e. .plw file) after being included in Building File (i.e.
.blw file) has been modified after its inclusion.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh4857.htm 10/06/2018
Level Information Página 2 de 7
planwin@computerhelpindia.com www.computerhelpindia.com
Frame Property
Column Steel Grade, Column Effective Cover, Beam Steel Grade Values set here are used in the
Design of Beam and Column
planwin@computerhelpindia.com www.computerhelpindia.com
Search Column
The same option can be also be used from the toolbar as shown
When the plan becomes large in size it becomes tedious to navigate through it. This option is
provided so
that the user can search any desired column number according to requirement.
On clicking this option a small window appears as shown it contains a list of all columns in the plan.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh4857.htm 10/06/2018
Level Information Página 3 de 7
planwin@computerhelpindia.com www.computerhelpindia.com
Pan
The same option can be also be used from the toolbar as shown
This option is used to Move the view of the Plan to as desired location
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh4857.htm 10/06/2018
Level Information Página 4 de 7
Without Panning
With panning
planwin@computerhelpindia.com www.computerhelpindia.com
Zoom Extents
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh4857.htm 10/06/2018
Level Information Página 5 de 7
This option is used to fit the plan to best possible scale for display.
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh4857.htm 10/06/2018
Level Information Página 6 de 7
Zoom In \ Out
Before Zoom In
After Zoom In
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh4857.htm 10/06/2018
Level Information Página 7 de 7
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh4857.htm 10/06/2018
View Column Type Página 1 de 5
This option gives the facility to change the viewing option of the Column
which can be toggled to any of the options given below
Column Description
Level wise Load
Description & Level wise Load
Column Size
Column Joint Number
Column Member Number
None
Note: The Column Joint Number & Column Member Number can be available only after performing the
Space frame analysis
If required to view Column description besides the column then select Column Description option.
If required to view the size of column then select the Size option.
Similarly according to requirement select the appropriate option that has to be displayed besides the column
If Size option is selected then the sizes of column are displayed besides the column as shown
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhC1AB.htm 10/06/2018
View Column Type Página 2 de 5
planwin@computerhelpindia.com www.computerhelpindia.com
This option gives the facility to change the viewing option of the beam
which can be toggled to any of the options given below
Beam Description
Beam Size
Beam Member Number
None
Note: The Beam Member Number can be available only after performing the
Space frame analysis
Beam Description
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhC1AB.htm 10/06/2018
View Column Type Página 3 de 5
Beam Size
planwin@computerhelpindia.com www.computerhelpindia.com
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhC1AB.htm 10/06/2018
View Column Type Página 4 de 5
Toolbar
This option is used to turn On \ Off the Toolbar that is seen on the screen
Toolbar Option ON
planwin@computerhelpindia.com www.computerhelpindia.com
Status Bar
This option is used to turn On \ Off the Status Bar that is seen on the screen.
A status bar is used to guide the user on the activities being performed.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhC1AB.htm 10/06/2018
View Column Type Página 5 de 5
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhC1AB.htm 10/06/2018
Auto size Column Página 1 de 10
Auto Size
This option is available in Column >> Column Orientation >> Auto size
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Auto size Column Página 2 de 10
planwin@computerhelpindia.com www.computerhelpindia.com
Column Sizes
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Auto size Column Página 3 de 10
planwin@computerhelpindia.com www.computerhelpindia.com
Column Orientation
This is the most important option in frame win for orientating a column.
Beta Angle for the column can has to be correctly for Space Frame Analysis
The column Direction can be set from the small window which show all the possible direction of
orienting the column
this possibilities are found out from the corresponding beam present at that junction
Select the Fixed face of the column from where the column will Grow
One or two Fixed face can be selected and offset distance from those fixed faces has to be specified
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Auto size Column Página 4 de 10
Column Aligned along the left vertical side of Column Aligned along the top horizontal side of
column column
Offset- 14 denotes offset along the column edges 1 - 4Offset- 34 denotes offset along the column edges 3 - 4
Column aligned along the left edge of column. Enter Column aligned along the right edge of column.
the appropriate offset data according to requirement. Enter the appropriate offset data according to
requirement.
Offset- 34 denotes offset along the column edges 3 - 4Offset- 23 denotes offset along the column edges 2 - 3
Offset- 14 denotes offset along the column edges 1 - 4Offset- 34 denotes offset along the column edges 3 - 4
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Auto size Column Página 5 de 10
On clicking Update Offset data & Beta Angle button the Set data is updated for the corresponding
column.
planwin@computerhelpindia.com www.computerhelpindia.com
This option is available in Column >> Column Orientation >> Edit >> Copy
This option is used to copy the sizes of a particular column so that the same sizes can be pasted on
the desired column to make them both of same size.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Auto size Column Página 6 de 10
option
If it is desired that the sizes of column C3 should be same as Column C1 then copy sizes of Column
C1 with this option and paste it on column C3.
planwin@computerhelpindia.com www.computerhelpindia.com
This option is available in Column >> Column Orientation >> Edit >> Paste
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Auto size Column Página 7 de 10
After using the Paste option Properties Of column C1 are copied to column C3
If it is desired that the sizes of column C3 should be same as Column C1 then copy sizes of Column
C1 with this option and paste it on column C3.
planwin@computerhelpindia.com www.computerhelpindia.com
This option is available in Column >> Column Orientation >> Change Column Regular to Legged \
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Auto size Column Página 8 de 10
Step A :Column C is to be converted to Legged Step B :Window on right hand side of screen seen in
Column Step 1
Step C :Window on right hand side of screen seen in Step D :Select the first leg and click the Select button
Step 1 to select the leg side.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Auto size Column Página 9 de 10
Step E :Select the Second leg and click the Select Step F :On clicking the Create button the L shaped
button to select the leg side. Column is formed as shown in Column preview
window.
To convert the legged column back to rectangular column click on the same button (i.e. Change
column Legged to Regular) on doing so the legged column is again transformed to rectangular
column.
planwin@computerhelpindia.com www.computerhelpindia.com
Load (Column)
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Auto size Column Página 10 de 10
As seen the Column for which the load are being viewed is
denoted by the Column Mark (i.e. C1) along with the column
mark the Total Load of column for all levels together is also
displayed (i.e. Total load 26.25)
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3D5F.htm 10/06/2018
Column Grouping Página 1 de 3
Column Grouping
This option is used to group various columns according to requirement (i.e. C \ E \ L Column for Shear Wall
etc)
On clicking the Column Grouping option select the Columns along which C Column is to be formed as
shown
Step 2
Step 1
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhCD20.htm 10/06/2018
Column Grouping Página 2 de 3
Step 3
On doing the appropriate selection of points as shown the final plan appears as shown
As seen the columns are grouped together and the same is denoted by blue color. The Group column can
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhCD20.htm 10/06/2018
Column Grouping Página 3 de 3
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhCD20.htm 10/06/2018
Joint Página 1 de 2
Joint
This option is used to add Non frame beams in the model by creating joints.
Auto Joint (Current Level) Auto Joint for that particular level are created.
Original Plan
Note :- By creating joint's on beams, the beams are broken into smaller beams
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh50FE.htm 10/06/2018
Joint Página 2 de 2
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh50FE.htm 10/06/2018
Bracing Members Página 1 de 4
Bracing Members
Original Plan
1) Auto Bracing
2) Manual Bracing
1) Auto Bracing :-
This option is available in SpaceFrame >> Bracing members >> Auto Bracing
a) Auto Bracing (All levels) :- Bracing member for all selected levels can be added by using this option
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhE8BB.htm 10/06/2018
Bracing Members Página 2 de 4
User has the option to select levels where bracing members are required
b) Auto Bracing (Current level) :-Bracing Member for a individual level can be generated using this option.
Level is indicated in the Level indicating option as shown
c) Delete All Bracing (All levels) :- Bracing Members for all the levels are deleted
d) Delete All Bracing (Current level) :-Bracing member for only current level is deleted
2) Manual Bracing :-
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhE8BB.htm 10/06/2018
Bracing Members Página 3 de 4
This option is available in SpaceFrame >> Bracing members >> Manual Bracing
Settings
Modify Current level :- If this option is selected then the manual bracings Adding / Deleted will be performed
only for current level only.
Modify similar levels :- If this option is selected then the manual bracings Adding / Deleted will be performed
only for levels having the same plan (i.e. plan with same file name).
Modify All levels :- If this option is selected then the manual bracings Adding / Deleted will be performed for
All levels.
a) Add new Bracing :- New Bracing member can be added by selecting any two points
b) Delete selected Bracing :- This option is used to delete the selected bracing.
Before using this option the bracing which is to be deleted is to be selected.
Selected Bracing :-
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhE8BB.htm 10/06/2018
Bracing Members Página 4 de 4
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhE8BB.htm 10/06/2018
Seismic - Response Spectrum Method Página 1 de 8
This option is available in Space Frame >> Seismic parameters - Response Spectrum Method
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh7CFE.htm 10/06/2018
Seismic - Response Spectrum Method Página 2 de 8
planwin@computerhelpindia.com www.computerhelpindia.com
This option is used to decide the basic factors for Seismic Analysis.
Depending upon the Type of soil on site and the the foundation
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh7CFE.htm 10/06/2018
Seismic - Response Spectrum Method Página 3 de 8
Performance Factor K
City : City where site is located Importance Factor : Importance factor is decided by
the type of structure being designed.
Seismic Coefficient : Seismic coefficient for the city.
As soon as city is selected Seismic coefficient is obtained
automatically (i.e. see option Tools >> City Info)
(But if desired it can be put in manually)
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh7CFE.htm 10/06/2018
Seismic - Response Spectrum Method Página 4 de 8
planwin@computerhelpindia.com www.computerhelpindia.com
Wind Calculation
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh7CFE.htm 10/06/2018
Seismic - Response Spectrum Method Página 5 de 8
planwin@computerhelpindia.com www.computerhelpindia.com
Wind Analysis
This option is used to decide the basic factors for Wind Analysis.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh7CFE.htm 10/06/2018
Seismic - Response Spectrum Method Página 6 de 8
planwin@computerhelpindia.com www.computerhelpindia.com
Wind Effect
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh7CFE.htm 10/06/2018
Seismic - Response Spectrum Method Página 7 de 8
Y Up Model :
Director 1 : X Direction
Director 2 : Z Direction
Z Up Model :
Director 1 : X Direction
Director 2 : Y Direction
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh7CFE.htm 10/06/2018
Seismic - Response Spectrum Method Página 8 de 8
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh7CFE.htm 10/06/2018
Space Frame File Generation Página 1 de 3
This option is available in Space Frame >> Space Frame File Generation
This option is used to generate file which can be processed in Space Frame program.
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh32F3.htm 10/06/2018
Space Frame File Generation Página 2 de 3
planwin@computerhelpindia.com www.computerhelpindia.com
This option is available in Space Frame >> Space Frame File Reading
This option is used to read the generated file (i.e. . anl file )which is generated by Space Frame program.
The .anl file is the file which is generated by Space Frame program after all the analysis have been
performed by Space Frame program.
By clicking on button select the . anl file (i.e. .anl file is the file generated by Space frame program after
analysis)
Note: Care must be taken to see that the correct result file is selected depending on the file generated for
analysis
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh32F3.htm 10/06/2018
Space Frame File Generation Página 3 de 3
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh32F3.htm 10/06/2018
Footing Design Página 1 de 10
Footing Design
Print : The Report of the design will be printed in Text or Spreadsheet format depending on the file type
selected by the user
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Footing Design Página 2 de 10
The Output Window Specifies all the output generated by the design
Footing Data
Length, Width, Total Depth, Edge Height, Top Length, Top
Width, Edge Angle Along Length, Edger Angle Along Width
Column Data
Length, Width
Stress Data
Allowable one way stress along length, Allowable one way
stress along width, Allowable two way stress
R/F Output
R/F Area along length, R/F Area along width, Min. R/F area
along length, Min R/F area along width, No. of bars along
length, No. of bars along Width, Spacing of bars along
Length, Spacing of bars along Width
Material Quantity
Concrete Volume, Total R/F
Load Cases
Max Pressure, Min Pressure, SBC, AST Required along
Length, AST Required along Width, Shear Stress Along
Length, Shear Stress Along Width, Two Way Shear
The Re-Design Button can be used to Redesign the Footing depending on the size provided by the user
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Footing Design Página 3 de 10
This load cases can be modified depending on the load combination set by the user
This are the Results from the analysis for all the different loading combinations
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Footing Design Página 4 de 10
This option is available in Design Space Frame >> Design Column (Regular)
This option is used to Design all the Regular columns in the plan.
The column design is done for Each level depending on the factored
worse case out of all the loading combinations
Design : To design individual column (select it from the list on left hand side of screen)
As seen the column is designed for all levels and for all the loading combinations provided in
Tools >> Load combination window.
Update Column Size : On clicking this option the newly designed Column sizes are update to the plan.
on changing the column size the space frame analysis has to be performed again for final update.
since all the offset data and other information's are updated hence reanalysis is necessary
Print : With this button the user has the facility to print report in Text File or in
Spreadsheet.
(If excel printing is selected the report is splashed on the screen after
generation)
C1 Column description
YD Size
ZD Size
Ulx Elastic load across X Axis
Uly Elastic load across Y Axis
Grade Concrete Grade Of Column
Load Cases Worst Loading cases for the column
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Footing Design Página 5 de 10
This Loading Combination can be changed from the Load Combination option in the Tools
planwin@computerhelpindia.com www.computerhelpindia.com
This option is available in Design Space Frame >> Column Information (IRRegular)
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Footing Design Página 6 de 10
Select
Level
Select
Column
Value of
Area, CGX,
CGY,
Moment of
Inertia in X,
Y, Z
Direction
Result for
Different
Loading
cases
Note :-
2) If generated report is to be manually edited at any later point of time Spreadsheet file generation is
advisable.
3) Spreadsheet file generation requires more time than Text File generation Since Formatting is to be
performed.
Using this results any user can manually Design irregular shape columns or Group column
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Footing Design Página 7 de 10
planwin@computerhelpindia.com www.computerhelpindia.com
Beam Design
Different type of graph can be generated by changing the graph type options
The options available are Moments, Top Steel, Bottom Steel, Shear Force, 6 Dia
Stirrups Spacing, 8 Dia Stirrups Spacing
Level selection : Desired level selection can be done. As soon as the level is selected
list of beams on that level is displayed
Beam Details :
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Footing Design Página 8 de 10
Design of whole Beam : in the Above Example the beam B7 is split in two parts for modelling purpose
but for design the parts of the beam are combined and the combine design is shown as above
B7 Beam description
Dist Distance from the start of the beam
Moment Beam Moment
Top Steel Top Steel of Beam
Bottom Steel Bottom Steel of Beam
Shear Force Shear Force of Beam
6 Dia If 6 Dia Reinforcement was used
8 Dia If 8 Dia Reinforcement was used
This values are directly taken from the analysis and factored
Depending on this value the beam will be designed and also on the worst case value the beam will be
designed
This case can be changed by the user from the load combination
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Footing Design Página 9 de 10
The Graph Shown the Moment Curve also Other graphs can be viewed by changing the option
provided
Print full : Prints all the beam data with all the loading cases
Print Summary: Prints all the beam data with only the worst case
planwin@computerhelpindia.com www.computerhelpindia.com
Analysis Result
This option is used to print the results of Beam \ Column \ Footing analysis
Note :-
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Footing Design Página 10 de 10
2) If generated report is to be manually edited at any later point of time Spreadsheet file generation is
advisable.
3) Spreadsheet generation requires more time than Text File generation Since Formatting is to be
performed.
Using this Results Any user can also manually Design Beam, Column, Footing. depending on his
requirement.
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hhB33A.htm 10/06/2018
Toolbar Página 1 de 4
Toolbar
1 2
3 4
planwin@computerhelpindia.com www.computerhelpindia.com
Load Details
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3BD9.htm 10/06/2018
Toolbar Página 2 de 4
planwin@computerhelpindia.com www.computerhelpindia.com
Load Combination
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3BD9.htm 10/06/2018
Toolbar Página 3 de 4
The seismic enhance factor are use to Enhance the seismic values generated in the program y the
factor provided by the user
If it is desired that a new Loading combination is required the same can be done with the help of Add
button.
Similarly if it is desired that a particular Loading Combination is to be removed select the row which is
to be removed and click the Remove button.
The existing combination Values can also be edited and then updated using the update button
planwin@computerhelpindia.com www.computerhelpindia.com
City Info
This option is used to Add \ Edit \ Remove city along with its details.
The City Information being entered is used for various analysis such as
Seismic Analysis & Wind Analysis.
Note :- If an particular city is not added along with its details in this form then it will not be available
in the Seismic Analysis & Wind Analysis.
planwin@computerhelpindia.com www.computerhelpindia.com
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3BD9.htm 10/06/2018
Toolbar Página 4 de 4
file://C:\Users\IBAYAE\AppData\Local\Temp\~hh3BD9.htm 10/06/2018