40-P-2000GI Page 1 of 2
1 Blower switch
2 Temperature selector wheel
3 Air distribution switch
Defroster button
Recirculated air pushbutton
Auto button
AC OFF button
REST button (residual engine heat
utilization), is combined with the AC
button
Rear compartment air distribution
button
Rear window heater button
Function
The AAC pushbutton control module (N22) makes it possible to make adjustments coming from the driver such as:
The control module integrated in the AAC pushbutton control module (N22) looks after all system regulation and control functions
such as:
comparing preselected and actual temperatures and controlling the air temperature at the air outlets
automatic switchover from fresh air to recirculated air mode
electrical control of refrigerant compressor
controlling the auxiliary fan or the electric suction-type fan motor/air conditioning with integrated control
The AAC pushbutton control module (N22) has a diagnostic capability. Consequently, any faults which occur are stored in the fault
memory which can be read with the help of the diagnosis assistant system (DAS).
When the AAC pushbutton control module is replaced (N22), variant coding must be carried out using the Diagnosis Assistant
System (DAS).
The AAC pushbutton control module (N22) also performs the following actuations:
The following sensor signals are read in by the AAC pushbutton control module (N22):
direct: temperature sensor evaporator, pressure and temperature sensor refrigerant, in-car temperature sensor, center nozzle
vent air temperature sensor, footwell and rear passenger compartment, sun sensor
via the CAN BUS: Ambient temperature display temperature sensor, sensor for specified values in rear control panel