Hydraulic Excavator
Technical Specifications
Engine Track
Engine Model Cat® C7.1 Standard Track Shoes Width 600 mm 24 in
Net Power – ISO 9249 151 kW 202 hp Number of Shoes (each side) 50
Net Power – SAE J1349 151 kW 202 hp Number of Track Rollers (each side) 9
Gross Power – ISO 14396/SAE J1995 152 kW 204 hp Number of Carrier Rollers (each side) 2
Bore 105 mm 4 in
Stroke 135 mm 5 in Drive
Displacement 7.01 L 428 in3 Maximum Gradeability 35°/70%
• Meets U.S. EPA Tier 4 Final, EU Stage IV, and Japan 2014 Maximum Travel Speed 5.3 km/h 3.3 mph
emission standards. Maximum Drawbar Pull 248 kN 55,753 lbf
• Recommended for use up to 4500 m (14,760 ft) altitude with
engine power derate above 3000 m (9,840 ft). Hydraulic System
• Net power advertised is the power available at the flywheel when
the engine is equipped with fan, air cleaner, muffler, and alternator. Main System – Maximum Flow – 560 L/min 148 gal/min
• Rating at 1,800 rpm. Implement (280 × (74 ×
2 pumps) 2 pumps)
Engine rpm Maximum Pressure – Equipment 35 000 kPa 5,075 psi
Operation 1,750 rpm Maximum Pressure – Travel 35 000 kPa 5,075 psi
Travel 1,750 rpm Maximum Pressure – Swing 28 400 kPa 4,120 psi
Boom Cylinder – Bore 140 mm 6 in
Swing Mechanism Boom Cylinder – Stroke 1407 mm 55 in
Swing Speed 11.50 rpm Stick Cylinder – Bore 150 mm 6 in
Swing Torque 82 kN·m 60,628 lbf-ft Stick Cylinder – Stroke 1646 mm 65 in
Bucket Cylinder – Bore 135 mm 5 in
Weights Bucket Cylinder – Stroke 1156 mm 46 in
600 mm (24")
Triple Grouser Shoes
Weight Ground Pressure
kg kPa
(lb) (psi)
Base Machine with 6700 kg (14,770 lb) Counterweight and Long Undercarriage
Reach Boom + R3.2CB2 (10'6") Stick + 1.54 m3 (2.01 yd3) HD Bucket 29 700 kg 56 kPa
(65,600 lb) (8.2 psi)
Reach Boom + R2.65CB2 (8'8") Stick + 1.54 m3 (2.01 yd3) HD Bucket 29 600 kg 56 kPa
(65,400 lb) (8.2 psi)
Mass Boom + M2.5DB (8'2") Stick + 2.12 m3 (2.77 yd3) HD Bucket 30 500 kg 58 kPa
(67,300 lb) (8.4 psi)
All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.
2
330 GC Hydraulic Excavator Specifications
kg lb
Base machine (6700 kg [14,770 lb] counterweight, upper frame, long undercarriage with HD rollers), 21 100 46,600
with boom cylinders and weight of 90% fuel tank and 75 kg (165 lb) operator included.
Track Shoes:
600 mm (24") Width, 11 mm (0.43") Thick, Triple Grouser Track Shoes 3620 7,980
Two Boom Cylinders 490 1,080
Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 460 1,010
Counterweight:
6700 kg (14,770 lb) Counterweight 6700 14,770
Undercarriage:
Long Undercarriage with HD Rollers 6700 14,800
Booms (including lines, pins, stick cylinder):
Reach Boom 6.15 m (20'2") 2300 5,070
Mass Boom 5.55 m (18'2") 2380 5,250
Sticks (including lines, pins, bucket cylinder, bucket linkage):
Reach Stick R3.2CB2 (10'6") 1440 3,170
Reach Stick R2.65CB2 (8'8") 1350 2,980
Mass Stick M2.5DB (8'2") 1640 3,620
Buckets (without linkage, with tips and side cutters):
1.54 m3 (2.01 yd3) HD, CB Linkage 1260 2,780
2.12 m3 (2.77 yd3) HD, DB Linkage 1740 3,840
Quick Couplers:
Pin Grabber QC CB with pins 530 1,170
Pin Grabber QC CB without pins 500 1,100
Dedicated QC 430 950
3
330 GC Hydraulic Excavator Specifications
Dimensions
All dimensions are approximate and may vary depending on bucket selection.
3 4
5
6
9 7
10 8
2
4
330 GC Hydraulic Excavator Specifications
8 8
25 25
7 7
20 6 20 6
5 3 5
15 4 15 3
4 4
10 3 10 3 4
2 2
5 5
1 5 1 5
0 0 0 0
2 2
1 1
5 R3.2CB2 5 M2.5DB
2 (10'6") 2 (8'2")
R2.65CB2 7
10 3 7 (8'8") 10 3 1 6
1 6
4 4
15 15
5 5
20 6 20 6
7 7
25 25
13 12 11 10 9 8 7 6 5 4 3 2 1 0 –1 Meters 13 12 11 10 9 8 7 6 5 4 3 2 1 0 –1 Meters
40 35 30 25 20 15 10 5 0 Feet 40 35 30 25 20 15 10 5 0 Feet
5
330 GC Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 6.7 mt (14,770 lb) – without Bucket
R3.2CB2
1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in 9000 mm/360 in
mm
in
7500 mm kg *5150 *5150 7270
300 in lb *11,350 *11,350 290
6000 mm kg *7200 6250 *4900 *4900 8230
240 in lb *15,300 13,450 *10,750 *10,750 330
4500 mm kg *8400 *8400 *7600 6150 *4850 4750 8830
180 in lb *18,250 *18,250 *16,600 13,200 *10,650 10,550 350
3000 mm kg *12 950 12 550 *9800 8250 *8300 5950 *5950 4550 *5000 4450 9140
120 in lb *27,850 27,000 *21,250 17,750 *18,050 12,850 *10,950 9,800 360
1500 mm kg *15 450 11 850 *11 150 7900 8950 5800 *6800 4450 *5300 4350 9190
60 in lb *33,350 25,500 *24,150 17,000 19,200 12,450 *12,550 9,600 *11,650 9,550 370
0 mm kg *16 600 11 500 *12 050 7650 8800 5650 *5850 4400 8990
0 in lb *35,950 24,700 *26,050 16,500 18,900 12,150 *12,800 9,700 360
–1500 mm kg *6350 *6350 *10 000 *10 000 *16 600 11 400 12 150 7550 8700 5600 *6750 4750 8530
–60 in lb *14,200 *14,200 *22,700 *22,700 *35,950 24,500 26,050 16,250 18,750 12,000 *14,850 10,400 340
–3000 mm kg *11 450 *11 450 *16 150 *16 150 *15 600 11 450 *11 700 7550 8750 5600 8400 5400 7740
–120 in lb *25,650 *25,650 *36,750 *36,750 *33,700 24,650 *25,300 16,300 18,850 12,150 18,550 11,950 310
–4500 mm kg *18 050 *18 050 *13 250 11 700 *9800 7750 *8600 6950 6520
–180 in lb *38,850 *38,850 *28,450 25,150 *20,750 16,700 *18,900 15,550 260
Reach Boom Lift Capacities – Counterweight: 6.7 mt (14,770 lb) – without Bucket
R2.65CB2
mm
in
7500 mm kg *6700 *6700 6670
300 in lb *17,450 *17,450 *14,900 *14,900 260
6000 mm kg *8150 *8150 *7650 6200 *6300 5950 7700
240 in lb *17,750 *17,750 *14,350 13,250 *13,950 13,200 300
4500 mm kg *11 200 *11 200 *9100 8500 *8150 6100 *6250 5200 8340
180 in lb *24,000 *24,000 *19,750 18,350 *17,800 13,150 *13,750 11,450 330
3000 mm kg *14 100 12 300 *10 450 8150 *8750 5950 *6400 4800 8660
120 in lb *30,300 26,550 *22,600 17,600 *19,050 12,800 *14,050 10,600 340
1500 mm kg *15 600 11 750 *11 650 7850 8950 5800 *6800 4700 8720
60 in lb *35,000 25,250 *25,150 16,950 19,200 12,450 *14,900 10,350 350
0 mm kg *16 550 11 500 12 250 7650 8800 5700 7350 4800 8510
0 in lb *36,450 24,750 26,400 16,550 18,950 12,250 16,200 10,600 340
–1500 mm kg *9750 *9750 *16 350 11 500 12 200 7600 8800 5650 8000 5200 8020
–60 in lb *22,250 *22,250 *35,500 24,700 26,200 16,400 18,900 12,200 17,650 11,450 320
–3000 mm kg *18 300 *18 300 *14 950 11 600 *11 350 7650 *8900 6100 7180
–120 in lb *41,700 *41,700 *32,300 24,950 *24,400 16,550 *19,600 13,500 290
–4500 mm kg *15 700 *15 700 *11 900 11 900 *8650 8250 5830
–180 in lb *25,400 *25,400 *19,000 18,550 230
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based
on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
6
330 GC Hydraulic Excavator Specifications
Mass Boom Lift Capacities – Counterweight: 6.7 mt (14,770 lb) – without Bucket
M2.5DB
mm
in
7500 mm kg *7900 *7900 5500
300 in lb *17,550 *17,550 220
6000 mm kg *8750 8650 *7350 7200 6720
240 in lb *19,250 18,550 *16,200 16,050 270
4500 mm kg *11 150 *11 150 *9450 8400 *7300 6000 7440
180 in lb *24,000 *24,000 *20,500 18,100 *16,050 13,350 300
3000 mm kg *13 800 12 400 *10 550 8100 9000 5800 *7600 5500 7810
120 in lb *29,700 26,700 *22,900 17,450 19,300 12,500 *16,650 12,100 310
1500 mm kg *15 950 11 750 *11 650 7800 8850 5700 8250 5300 7870
60 in lb *34,400 25,300 *25,250 16,750 19,000 12,250 *18,100 11,700 310
0 mm kg *16 700 11 450 12 200 7600 8750 5600 8500 5450 7640
0 in lb *36,150 24,650 26,250 16,350 18,800 12,050 18,750 12,000 300
–1500 mm kg *16 300 *16 300 *16 100 11 400 *11 950 7550 9500 6050 7080
–60 in lb *37,150 *37,150 *34,900 24,550 *25,850 16,250 21,000 13,350 280
–3000 mm kg *19 200 *19 200 *14 100 11 550 *10 150 7650 *9850 7500 6110
–120 in lb *41,500 *41,500 *30,350 24,900 *21,700 16,700 240
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based
on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
7
330 GC Hydraulic Excavator Specifications
The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do Maximum Material Density:
not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended 2100 kg/m3 (3,500 lb/yd3)
at ground line with bucket curled. 1800 kg/m3 (3,000 lb/yd3)
Capacity based on ISO 7451:2007. 1500 kg/m3 (2,500 lb/yd3)
Bucket weight with General Duty tips. 1200 kg/m3 (2,000 lb/yd3)
X Not Recommended
Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are
outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including
but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or
catching of heavy loads will reduce the life of the boom and stick.
PIN-ON ATTACHMENTS
Counterweight 6.7 mt (14,770 lb)
Boom Types Reach Mass Excavation
Stick Lengths 2.65 m (8'8") 3.20 m (10'6") 2.50 m (8'2")
Hydraulic Hammers B30 ü ü ü
B35 ü ü ü
8
330 GC Standard and Optional Equipment
9
330 GC Standard and Optional Equipment
10
330 GC Attachments
11
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web AEXJ0084 (11-2018)
at www.cat.com Build Number: 07A
(Korea)
© 2018 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow”, the “Power Edge”
trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not
be used without permission.