0.95
dimensioned view 5. General elevations are on hold waiting for final urbanization.
6. Indicated useful surfaces are preliminary because of definitive surface depend on the thickness of the
enclosures and definitive distribution.
0.95
2.05
2.05
+857.650 41.21 2.4% 2.4% +857.650
2.4% +857.650 +857.650 2.4% Instructions:
3.3
6.00
4.6 4.5 4.4 4.8 1. FFL for office and FFL for storage areas shall be the same; on the other hand, FFL will be 150mm above
0.30%
0.30%
0.50
0.30%
0.30%
8.15
E 4.7 4.3 4.2 E' sidewalk level; at the same time, sidewalk will be 150mm above road level.
7.20
7.20
4.70
2. For gutter installation detail, maximum rainfall intensity, slope and surface of roof shall be considered in
4.9 order to define the minimum section in accordance with SBC-701_Sanitary.
3.4 4.1 3. Total number and dimensions of exit or exit access doorways shall be in accordance with the local codes
+858.850
2.50
(SBC-201 & SBC-801) and international codes (NFPA-101); taking into account the maximum travel
distance with the updated lay-out of the building and the type of occupation.
Issuing bay 9 4. Pallet racking and storage purpose just for information.
8.00 x 6.00 m 5. Enclosure requirements:
6.80
3.5 5.1. Insulated (U min ) pre-cast concrete panel, minimum height 3,00 meters,
23.00
Rejected items bay
9.00
0.30%
thickness 300 mm.
26.24
+857.650 8.00 +857.650 10.00 x 6.00
1.10
+857.650 +857.650
5.2. Sandwich panel for wall, U min
0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 10.00 5.3. Sandwich panel for roof, U min
3.1
5.4. Glazed area, U min and SF (solar factor) 0,35
4.00
6. Fire resistance of structure and enclosure will be in accordance with :
2.20
FM200 protects Occupancy: Group S-1 [IBC/SBC-801] Storage [NFPA 850/101]
3.6 Received items bay 5.10 Type of construction: Type II (222) [NFPA 5000/220] Type IIB [IBC Chapter 6 / SBC-801]
C C' 2.4%
the IT room 8.00 x 16.00 m Definitive fire resistance for structure and enclosure have to be confirmed in function of the stored
3.2 Inspection bay
11.50 materials.
7 3.8 10.00 x 10.00 m
9.00
3.7
44.00
+857.650 7. Acoustic insulation will be in accordance with GEMSS-G-02 Rev 02 Plant Design Criteria; in function of
6.80
Issuing bay
the distance between the building and the equipment.
8.00 x 6.00 m
0.30%
0.30%
0.30%
8. MAB drawings correspond to the use of the building during mirror assembly works; on the other hand,
2.4% W&O drawings correspond to the definitive use of the building as warehouse and office. Steel structure
0.30%
3.15 doesn't vary; overhead cranes will be removed and only the enclosure has to be updated taking into
account the access doors and ventilation grilles in accordance with the drawings.
19.99
The construction drawings for modification shall be submitted for approval.
0.30%
7.65
References:
6.00
6.15
8.40
3.13 3.12
9.60
25.20
5.75
0.68
9 9
6.87 5.00 5.00 5.00 6.55 5.00 5.00 6.30 5.00 5.00 5.00
0.30%
Storage bay
7.53
10.00 x 7.00 m
0.30%
0.30%
0.30%
0.30%
27.76
B 6.00 B'
0.30%
0.30%
0.30%
0.30%
Storage bay
0.30%
8.20
10.00 x 7.00 m
+857.650 8
+857.650
29.27
6.00
6.00
1.80
Storage racks Storage racks
+857.588 +857.650 +857.588 140 un. +857.588 278 un. +857.650 +857.588 +857.650 +857.588
2.4% +857.650
9.30
8.20
0.5% 0.5% List of abbreviations:
0.5% 0.5% 0.5% 0.5% 0.5% 0.5% TOC: Top of concrete TOP: Top of plate TBD: To be disscused
7.88
FFL: Finish floor level TOF: Top of foundation MAB: Mirror assembly building
FCD: Folded counterweight door RUD: Roller-up door
0.30%
W&O: Warehouse and offices MAB: Mirror assembly building
Legend: Stakeour point Top of concrete Emergency shower Utilities station:
6.15 5.00 5.00 6.30 5.00 5.00 5.00 - Service air
9 6.84 2.4% - Service water
0.30%
0.30%
0.30%
0.30%
6.53 1.50 Storage bay
8.00
13 14
10.00 x 7.00 m
M
Electrical 09 2018/05/29 Annex build. for I&C and elect. panles IFD LGG LEVA RPR VTM
room 08 2018/03/15 Revision IFD LGG LEVA RPR VTM
07 2017/10/27 Revision as per comments IFD RMG LEVA RPR VTM
11.98
Storage bay
8.00
30.80
N
06 2017/07/06 Revision as per comments IFD RMG LEVA RPR VTM
10.00 x 7.00 m
37.90
0.30%
00 2016/07/05 First edition IFD ADSC/HGRC CSG JNM / NPS VTM
Rev. Edition Description: Issue Signature Signature Signature Signature
No.: Date: for: Drawn: Checked: Reviewed: Approved:
O
10.00 6.88 5.00 5.00 5.00 6.15 5.00 5.00 6.30 5.00 5.00 5.00
+857.650
16.00
0.30%
0.30%
0.30%
Storage bay
10.00 x 7.00 m
4.23
5.00
G'
9 5
100.50
W&O. Ground floor plan view
Scale 1:250
Client: P. Engineer (if applicable):
Stamp: Signature: P.Eng.No: