Supply
No.
Description of Item Unit Qty
rate
Providing and fixing of Glass fibre reinforeced concrete
cladding make of M/s SaintGobain with slabs of approved
size, shape and shade on dado & facia and similar locations
1 etc.,including rounding of edges/ nosing and providing split Sqm 200
head SS clamps in required quantities.The approved
equivalent and applying it as per manufacturers guidelines.
Fixing
Rate
Sl. No. Description of Item Unit Qty
Supplying and fixing G.I.Puddle Flanges of various dia
and size made out of G.I with screwed ends, cap and
plates for embedment in concrete as necessary with
7 suitable accessories, consumables welding accessories
including placing in position, grouting, making necessary
provision in the centering & shuttering etc, including one
coat of zinc rich primer complete and as directed.
Providing and fixing of retro-reflectorised sign boards / sign made of encapsulated lense
type of reflective sheeting fixed over aluminium sheeting 2.0mm thick complete
including vertical pipes / angles / posts etc all complete as per drawing & MoRTH Specs
(Fifth Revision) signages such as Prohibitory signs, stop signs cautionary warning signs,
parking sign, informatory signs, advanced direction signs,as per IRC 67 made high
12 intensity grade sheeting fixed supported on a stainless steel angle / circular iron post Nos 250
firmly fixed to the ground by means of of properly designed foundations with M15 grade
cement concrete 45cmx45cmx60cm below ground level as per approved drawing all
completed as per technical specifications and as directed by the EIC
Rate
Mahindra Susten Pvt Ltd
Min OPC 53
Cement Rate
Sr.no Description Unit
Content in INR
Kg
1 RMC M-7.5 180 Cum
2 RMC M-5 As per IS Cum
3 RMC M-10 220 Cum
4 RMC M-25 340 Cum
5 RMC M-20 As per IS Cum
6 RMC M-30 As per IS Cum
7 RMC M-15 As per IS Cum
8 RMC M-40 390 Cum
Item No.
F)
1a
2a
3a
4
WORK DESCRIPTION
do- using aluminium section Powdered coated to a minimum of 60 to 70 microns with exterior durable pure polyester grade pow
quality.
KSRB 7.11: Providing and fixing in position Aluminium windows and ventilators as per approved drawings with sliding shutters u
windows frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m, sides and top section 1.3mm thick, weight 0
frame section comprising top and bottom section of size 40x18mm, wall thickness 1.25mm. weight 0.47kg/m. shutter side outer
thickness 1.25mm. weight 0.417kg/m, shutter interlock section 40x26.7mm wall thickness 1.1mm. thick, weight 0.469kg/m, the
nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc., 7 providing and fixing 5.5mm thick pla
fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonne
assembled frame, stiffened with end clips for corners, angles etc. and fixed to the walls, lintels, floor beams/sills as the case m
steel screws, rawl plugs or teak wood gattas including cutting masonry or concrete and making good the original surface using
do- using aluminium section Powdered coated to a minimum of 60 to 70 microns with exterior durable pure polyester grade pow
quality.
KSRB 7.15 Providing , fabricating, assembling and fixing in position Aluminium partitions using aluminium sections of mat finish
combination of plain grove, single grove and double grove as per requirements for the frames of overall size 63.5mm*38.1mm w
having section weight plain sections 1.054kg/m single grove thickness 1.95mm section weight 1.094kg/m double grove thickne
weight 1.094kg/m and bottom member 114.3mm * 44.45mm thickness 3.18mm weight 2.646kg/m Aluminium louvers section of
34.93mm 1.45 mm thick section weight 0.429kg/m bottom portions provided with 12 mm thick pre laminated sheet both sides o
lamination exterior grade upto 0.9m height spacing of vertical member not exceeding 0.6m c/c sections are cut to the required l
and corners are grinded subdividing frames & riveted to the frames the assembled frames stiffened with corner angles stripped
rawl plugs and teak wood gutties to RCC columns on sides RCC lintels or beams at top and floor at bottom including cutting ch
good with cement mortar to match the surface providing and fixing 5.5m thick plain glass for middle portion viz. 0.9m to 2.13m a
louvers dictions the glass and panels fitted with glazing clips of 19mm * 17.3mm of thickness 0.9mm weight 0.124kg/m aluminiu
removal of any rust and prevention of further rust formation coated with greasy materials for non-adherence of mortars or any o
vertical members embedded in the flooring by making suitable sized holes and fixing with cement mortar with necessary openin
standard size (excluding cost of door) all the frame thoroughly cleaned free from rust scale or dirt including cost of materials fixt
of machinery complete as per specification.
KSRB 7.15.2 -do using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyeste
approved quality
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for curved Brick/RCC/stonew
with necessary aluminium frame works at required level made out of 50x25x3mm C section or equivalent. The panel should con
thermoplastic core of antitoxic LDPE sandwiched between 0.25skins thick aluminium sheet making a total panel thickness of 3m
be finished with PVDF based coating on top sides and service coating on reverse sides would be in polyester paint. The system
GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other nece
sealing shall be done using weather sealant necessary rods etc., complete as per specification and drawing.
BOQ
Unit
Unit Total Rate in
Quantity INR
Sqm 214
Sqm 1854
Sqm 350
Sqm 175
Item No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
WORK DESCRIPTION
Pling Works
Providing and installing cast in situ bored pile of 600mm dia using hydraulic pilling rig with M25 grade concrete
as per specification and approval of engineer in charge. (to be paid from ground level to found level) etc.
complete including survey, removal earth, mud, slush etc. to dumping ground as per approved method.
Excluding linear, Reinforcement.
Only Piling work, Concrete will be given by Mahindra.
Providing and installing cast in situ bored pile of 500mm dia using hydraulic pilling rig with M25 grade concrete
as per specification and approval of engineer in charge. (to be paid from ground level to found level) etc.
complete including survey, removal earth, mud, slush etc. to dumping ground as per approved method.
Excluding linear, Reinforcement.
Only Piling work, Concrete will be given by Mahindra.
Providing 6mm thick MS permanent liner including fabrication and driving charges. The liners actually provided
in piles shall be measured and paid off.
MS Liner under contractor scope.
Non-destructive integrity test of cast in situ as per specification and submitting the report
Providing T.M.T Steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in
position, lapping and/or welding wherever required, tying with 16-gauge binding wire and anchoring to the
adjoining members wherever necessary (laps, hooks, and wastage shall not be measured and paid) complete as
per design cost of materials, labour, HOM of machinery complete as per specifications and approved drawings
& as directed by the Engineer-in-charge. ( FOR PILES)
TMT steel will be provided by Mahindra.
Unit Rate
Unit Total in INR
Quantity
Cum 8000
Cum 1640
Rmt 480
No 120
MT 200
CUM
CUM
CUM
CUM
CUM
CUM
CUM
CUM
CUM
CUM
No
No
No
No
No
No
No
Sqm
Sqm
Sqm
Source-
Sr.no Description Unit Rate-1 Rate-2 Distance
from site
2a
WORK DESCRIPTION
Mineral Fibre false ceiling: Providing and laying of world class mineral acoustic ceiling panels of as per the following specificatio
approved make Mineral Acoustic ceiling panels of size 595x595mm-12mm thick suitable for use in arrears up to 40 e and RH 70
manufacturer. Tile have 15 min fire retardant and does not contain asbestos/urea formaldehyde, Technical details of New Mod
Thermal conductivity Non-disposable, Light Reflection 80% fire resistance Non-resistance Non-disposable. Mineral fibre ceiling
placed inside the grid work.
Providing and fixing access raised floor (false flooring system) of medium grade UDL panels manufactured from pressed formed
resistant galvanised steel with total overwrap of one-piece top, sides and bottom flange encapsulating high density particle boa
stitched and with a panel to cater in the size 600x600x31 mm. The panel has to be placed on the pedestal made from all steel
construction, zinc plated consisting of an anti-vibrational head cap with cruciform upstands and four panels locating studs, pos
clipped pedestal clipped to the steel top plate. The pedestal cap shall have static electricity. The steel base plate of the pedesta
fixed on the sub floor with epoxy pedestal adhesive and/or mechanical fixing.
600/450 mm high cavity Floor
BOQ
Unit
Unit Total Rate in
Quantity INR
Sqm 2175
Sqm 1120
Item No.
Item No.
Item No.
3
4
5
Item No.
1
WORK DESCRIPTION
Providing and laying integral cement based waterproofing treatment including preparation of surface as required for
treatment of roofs, balconies, terraces etc. consisting of following application, (a) Applying and grouting a slurry coat of
neat cement using 2.75kg/sqm. of cement admixed with proprietary water proofing compound confirming to IS: 2645 over
the RCC slab after cleaning the surface before treatment. (b) Laying cement concrete using broken brick bats 25mm to
100mm size with 50% of cement mortar 1:5 admixed with proprietary water proofing compound conforming IS: 2645 over
20mm thick layer of cement mortar 1:5 admixed with proprietary water proofing compound to required slope and treating
similarly the adjoining walls upto 300mm height including rounding off junctions of wall and slabs. (c) After two days of
proper curing, applying a second coat of cement slurry admixed with proprietary water proofing compound. (d) Finishing
the surface with 29mm thick jointless cement mortar of mix 1:4 admixed with proprietary water proofing compound and
finally finishing the surface with trowel and neat cement slurry and making of 300x300mm square. (e) The whole terrace so
finished shall be flooded with water for a minimum period of two weeks for curing and for final test including cost of
materials, labour complete as per specification 7 approved drawing.
Make: BASF
WORK DESCRIPTION
Providing and applying Acid resistant paint of approved make in two or more coats to give good and clean shade including
brooming down and cleaning the surfaces, finishing of holes and depressions including scaffolding and staging or all levels
with all labour and material etc. complete at all Levels.
WORK DESCRIPTION
Providing and installing cast in situ bored pile of 600mm dia using hydraulic pilling rig with M25 grade concrete as per
specification and approval of engineer in charge. (to be paid from ground level to found level) etc. complete including
survey, removal earth, mud, slush etc. to dumping ground as per approved method. Excluding linear, Reinforcement.
Providing and installing cast in situ bored pile of 500mm dia using hydraulic pilling rig with M25 grade concrete as per
specification and approval of engineer in charge. (to be paid from ground level to found level) etc. complete including
survey, removal earth, mud, slush etc. to dumping ground as per approved method. Excluding linear, Reinforcemen
Providing 6mm thick MS permanent liner including fabrication and driving charges. The liners actually provided in piles shall
be measured and paid off.
Non-destructive integrity test of cast in situ as per specification and submitting the report
Providing T.M.T Steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position,
lapping and/or welding wherever required, tying with 16-gauge binding wire and anchoring to the adjoining members
wherever necessary (laps, hooks, and wastage shall not be measured and paid) complete as per design cost of materials,
labour, HOM of machinery complete as per specifications and approved drawings & as directed by the Engineer-in-charge. (
FOR PILES)
WORK DESCRIPTION
Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture
of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per Sqm. over 50mm thick
sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of
sand underneath to come up in between joints ,final compaction of paver surface joints into its final level, including cost of
materials, labour and HOM of machineries complete as per specifications.
Sqm 12550
BOQ
Unit
Unit Total Rate in
Quantity INR
Sqm 1680
BOQ
Unit
Unit Total Rate in
Quantity INR
Cum 8000
16000 8000
Cum 1640
3280 1640
Rmt 480
960 480
No 120 240 120
MT 200
BOQ
Unit
Unit Total Rate in
Quantity INR
Sqm 7560
Over all qty = 25000 Cum
Rate with
Sr no RMC Rates
Fly ash
1 GSB MT
2 WMM MT
3 90-115mm aggregate
5 River Sand MT
7 10mm aggregate MT
8 20mm aggregate MT
9 40mm aggregate MT
10 63mm to 90mm MT
14 Stone dust CUM or MT
15 Rubble Soling 230mm CUM or MT
Kerb Stone
1 Height 450mm, thickness 150mm Nos
2 Height 400mm, thickness 150mm Nos
3 Height 350mm, thickness 150mm Nos
4 Height 350mm, thickness 100mm Nos
Paver Block
1 M50- 100mm thick Sqm
2 M40- 80mm thick Sqm
3 M40- 60mm thick Sqm
4 M30- 80mm thick Sqm
5 M30- 60mm thick Sqm
Distance from Re
M7.5 to Without With
Hero Site ma
M35 cement Cement
in KM rks
Basic rate 2250 2250
6 1860 576600
31
0kg
/sq
m Basic rate 2300 till 75 kg fly ash
Ad
Re
ma
rks
Distance from
your plant to
Shamshabad
2.(a)
Description UNIT Qty
Providing and Installing High speed roll up door made out of Aluminium Color Sq.M. 100
panels with color coated galvanized guide (shutter should withstand against
47mtr/Second wind load as per IS 875 Part III) and top shaft cover, powerful electric
motor 3-phase frequency converter control (FU) in plastic cabinet, enables opening
speed of up to 2.50mtr/second. And safety light and hooter / alarm system, Open- stop
- close button on each side, Fuse protection, Emergency off button, DES electronic
limit switch (IP 65 rated), emergency opening arrangement, etc complete in all respect
as per engineer in charge instruction.
Providing and fixing in position rolling shutters of 18 gauge thickness including top
drum with 18 gauge cover, side guides, ball-bearing for drum, handles and locks etc.
complete with one coat of red oxide Zinc Chromate primer and three coats of oil paint
of approved make & shade. (As per IS 6248-1979). For payment clear opening will be
considered.
do- with gear arrangement. Sq.M. 110
Sr no
1
2
Item
Providing & fixing of Acoustical Mineral fiber board ceiling tiles of ARMSTRONG- 600x600x15mm
DUNE Microlook90 Module 5464M (Global White) False Ceiling . fitted with suitable grid of ARMSRONG
with suspending system. The cost shall include the cost of grid making suspended from slab. It is to be
executed as per Mnufacturer & Engineer incharge instruction. NRC value of tiles should be .50.
Providing & fixing of Acoustical Mineral fiber board ceiling tiles of ARMSTRONG- 600x600x20mm
OPTRA False Ceiling . fitted with suitable grid of ARMSRONG with suspending system. The cost shall
include the cost of grid making suspended from slab. It is to be executed as per Mnufacturer & Engineer
incharge instruction. NRC value of tiles should be .90.
Reinfor R+W
UOM Qty
Sq.M. 550
Sq.M. 350
Item No.
1a
1b
Item No.
1
Item No.
1
2
Note:
BOQ
WORK DESCRIPTION
Unit Total
Quantity
Providing and Laying of Epoxy paint of approved brand on Cement concrete flooring &
other
NOTE:surfaces
The cost including grinding
of the item & cleaning
is inclusive of all the floor and
material, applying approved
accessories, hardware,primer with
labours,
3mm thick high build Epoxy resin screen on floor surface and to fill up holes,
tools, plants & machineries testing, curing, transportation, handling with all lead, lifts, dents with
epoxy material
and working at to
all get levelheights.
levels& and even surface &
Providing at removing
all locations preparedand
scaffolding andmaking
appliedgood
as per Sqm 11500
manufacture’s specifications including appropriate priming coat, preparation
the surfaces and for all locations etc. Item is complete. Nothing shall be paid extra. The of surface
etc. complete
Colour / Shadeas/Texture/Make/finishes
per the direction of Engineer
of all material shall be got approval by the
Engineer
BOQ
WORK DESCRIPTION
Unit Total
Quantity
Providing and fixing MOTOR OPERATED type rolling shutters of approved make of 18
gauge, 75mm wide cold rolled steel laths of convex corrugation, with side guides and
bottom rail, with interlocking arrangements for steel laths by means of alternate clips,
suspension shaft with high tension coil type springs two numbers, mounting on specially
designed pipes shaft, with brackets plates, guide channels, ball bearing arrangements
Sqm 450
for inside & outside locking with push & pull operation complete including pulling hooks,
4nos handles with all fittings and accessories, painted with a coat of red lead paint
( without top cover) cost of materials, labour, HOM of machinery complete as per
specification & approved drawing.
- do - but extra over item No. 1 for operating system (motor and electrification) Nos. 41
Providing and fixing top covers made out of 20 gauge MS sheet over pull and push
rolling shutters bent to shape including cost of red lead primer coat of painting,
materials, labours, HOM of machinery complete as per specification and approved Mtr 70
drawing
BOQ
WORK DESCRIPTION
Unit Total
Quantity
Providing and fixing of Aluminium composite panel of approved make and colour for
wall cladding for curved Brick/RCC/stonewalls & columns beams with necessary
aluminium frame works at required level made out of 50x25x3mm C section or
equivalent. The panel should consist of 2.5 mm thermoplastic core of antitoxic LDPE
sandwiched between 0.25skins thick aluminium sheet making a total panel thickness of Sqm 475
3mm. The surfaces will be finished with PVDF based coating on top sides and service
coating on reverse sides would be in polyester paint. The system shall be fixed using GI
brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring
washer and cap nuts and all other necessary accessories, sealing shall be done using
weather sealant necessary rods etc., complete as per specification and drawing.
BOQ
WORK DESCRIPTION
Unit Total
Quantity
Anti Fungal self levelling 3mm EPU toping. Sqm 24457
Epoxy lining to ETP and STP. Sqm 5321
Make of material to be suggested by vendor as we need to get approved from the design consultant.
BOQ
Unit
Rate in
INR
BOQ
Unit
Rate in
INR
BOQ
Unit
Rate in
INR
BOQ
Unit
Rate in
INR
nt.