WIRING DIAGRAMS
L1 Connect to “Privacy” Indicator
E8231DS
Live
COM
L2 Connect to Door Bell
"Privacy" Switch
Neon
Neutral
APPLICATION GUIDE
Loop Terminal
Hotel Accessories
Live
E8231WS "Please Wait" Switch
CAT. NO. COM
E8231DS
L
E8231WS
Connect to “Please Wait” Indicator
E8231CS
E8233DMWS Neon
Pieno
Neutral
Loop Terminal
MS18531
E8231CS Live
Thank you for choosing Schneider Electric Pieno’s electronic accessories. To COM "Please Clean Up" Switch
ensure proper application of our products, please read through the
following information before installation and use . L
Connect to “Please Clean Up” Indicator
This application guide applies to the following products.
Neon
COM
"Please Clean Up" Switch
E8231CS 16AX 1 Gang Switch with Neon with L
Connect to
"Please Clean Up" Symbol COM "Please Clean Up" Indicator
MOUNTING INSTRUCTION
1. Connect the wires to the
terminals (recommend to
leave 10-12mm bare metal Details Picture
SPECIFICATIONS wire) and tighten the
Rated Voltage :250V~ terminal screws.
Rated Current :10A 2. Screw the grid plate onto
the wall box. Wall Box
Dimension :87mm x 87mm
3. Snap the faceplate onto
Mounting Centre :60.3mm
the grid plate.
Compliance :IEC 60669-1, BSEN 60669-1, MSIEC 60669-1, GB 16915.1,
Grid Plate
SS 227-1
Mounting Screw
Faceplate
Details Picture
Insert a screwdriver into the clip
IMPORTANT NOTE lock, and twist the screwdriver to
1. The products must be installed by qualified electricians. remove the faceplate.