-.01 +.01
-0.01 +0.02
00
00
Axial1 Axial2
00 00
-0.01 +0.01
+0.03 +0.02
+0.03 -0.01
+0.03
00
Axial1 Axial2
00 00
+0.01 +0.02
07-08-2016
1. Coal feeder # 8D shutdown maintenance completed
2. COAL FEEDER #8B overhauling job under progress
3. ID Fan # 8A DE brg. End seal fitted after necessary modifications & maintenance
-0.01 -0.01
-0.01 -0.02
-0.02
00
Axial1 Axial2
DATE Work Descriptions
00 00
-0.01 +0.04
-.08 +.05
-0.05 -.04
+.03
00
Axial1 Axial2
00 00
-0.09 +0.14
DATE Work Descriptions
10-08-16 1. MILL#8F motor to gearbox alignment job completed alignment readings:
00
00
00 .00
00 00
00
00
Axial1 Axial2
00 00
00 00 00 +0.01
00 +0.01
17-08-2016 1. APH #8B Guide bearing area ash cleaning is under progress.
2. Coal Feeder #8B Tail pulley fitted along with two nos new bearing (6212 ZZ)
3. FD Fan #8A upper housing fitted & bolts tightening done.
26-08-2016 1. APH #8B Guide bearing lub oil line(supply&return line) open for cleaning
2. Mill #8A labyrinth seal fittings job under progress
3. Mill #8D bowl hub grinding job under progress
4. Coal Feeder #8B trial run done
05-09-2016 1. APH #8B Guide bearing lub oil line(supply&return line) cleaning job completed
2. APH #8B seal repairing job completed(cold end)
3. MILL 8E bowl hub welding job in progress
4. ESP out let duct ash cleaning job in progress
TO
THE SITE INCHARGE(BHEL)
DPL SITE,DURGAPUR
PLEASE GIVE US 30 NOS(THIRTY PIECES) CORGATED SHEET FOR
UNIT #8 MINI STORE BUILD UP PURPOSE
THANKS