by
presented to
1
2
Preface
Thank you
(Mledpan, Peerawich,
Tanapoj, Chinnapat)
Preface 3
Background 5
Objective 6
Materials 10-15
Process 16-22
Discussion 28-29
4
Background
5
Objective
6
Idea and Plan
7
So according to our ideas and plan, we use
the property/ability of magnet to push and
pull. We use one side of the magnet with the
rail and also the same side of magnet on the
car to make both of them push each other.
8
9
Materials
Tamiya Car(Optional)
Car that can be use with this rail can be other
car ex. remote control car, in this case we use
Tamiya car as it can drive by itself and has
less weight than remote control car.
10
Magnet
11
Wood plank
12
Cardboard
13
Glue gun and glue stick
14
Electric Drill and Saw
15
Process
16
Second, stick magnet to the wood plank and
also the car using glue gun.
17
Cut one of the wood plank in half (long side)
and stick the the base wood as the wall of the
rail way.
18
Cut the end of both side of the rail way to be
use as the represent of the car station.
19
Cut the card board in box shape with one
open side, use glue gun the stick each end
together. and also spray for decoration.
20
Stick the card board the the wood base as the
legs of the rail way.
21
Stick the upper wood with the wall to make
sure the car won't push with the magnet to
hard that it bounced off the rail way.
22
Final product.
23
24
25
26
27
Discussion
28
Along our project, we also come up with the
new idea that magnet force isn't only can be
use to elevate the car but also can be use to
stick the car with rail, it gave us the other
perspective and idea that why define the
magnet involve in transportation by just one
way while there are a lot of possibility and
many creative ways that magnet could be
use. In our final product you will also heard
about the explanation and demonstration of
the way that we use our magnetic the new
idea.
29
30