13-M-1337
THIRD SEMESTER
313CETO7/311CET07-SURVEYING-1
(REGULATIONS-2013)
(OR)
12. b) The bearings observed at the stations of a closed traverse are given below. Check
whether the bearings are correct. If not, correct the bearings by the method of included
angles.
Side FB BB
AB S 32015’ E N 580 45’ W
BC N 660 00’ S 260 15’ W
CD N 510 45’ W S 570 00’ E
DA S 180 00’ W N 150 30’ E
13. a) Explain general methods to determine areas
(OR)
13. b) The following consecutive readings were taken with a levelling instrument at intervals of 20m.
2.375, 1.730, 0.615, 3.450, 2.835, 2.070, 1.835, 0.985, 0.435, 1.630, 2.255 and 3.630m
The instrument was shifted after the fourth and eighth readings. The last reading was taken on a BM of
RL 110.200m. Find the RLs of all the points
14. a) What are temporary and permanent adjustments done for a theodolite
(OR)
15.a) Explain in detail any three linear methods of setting out a simple curve
(OR)
15. b) Two tangents intersect at a chainage of 1,000 m, the deflection angle being 300. Calculate
all the necessary data for setting out a circular curve of radius 200m by the method of offsets
from the chord produced, taking a peg interval of 20m..