C Mn Si P S Cr Mo Ni Cu
0.070 0.55 0.45 0.010 0.010 9.0 1.0 < 0.30 < 0.30
BRUSCATO FX < 15 PPM
Preheat/Interpass 260oC
PWHT 745oC / 1 hr.
UTS : 550 MPa Min.
0.2% proof stress 470 MPa Min.
Elongation 20.0% Min.
CVN Impact Values:
At +20oC 80 joules
At -20oC 40 joules
III. Sizes: 2.40 x 1000 mm Embossed at both ends.
NOTE:- As the alloy steel grade is air-hardening material, preheating and post
weld heat treatment are required. It is used for elevated temperature creep service
and also possesses corrosion resistance against steam, hot hydrogen gas and high
Sulphur crude oils. Hence, used widely in petrochemical and refinery units.
0317