AMNT 270
EV Blended
Course Syllabus
Academic Term: Term: Dates of term: 2201: 17 Oct 2016 – 18 Dec 2016
Location: EV-Classroom/Blended,
Aviano, Katterbach, Kuwait, Spangdahlem
E-mail: thomas.omeara@erau.edu
Course Description:
This course is an introduction to airframe structures, appropriate applications and
repairs. The study of aircraft wood, dope, fabric, sheet metal, welding theory and
methods of fabrication are included in this course.
Course Goals:
The course is designed to provide foundational knowledge into the various areas of
aeronautical airframes structures and systems. Upon successful completion the student
will have an operational knowledge of the principles, fundamentals, and technical
procedures associated with airframe structures, appropriate application and repairs.
1
Revised: 6/20/2013
Learning Outcomes:
1. Analyze and describe the basic fixed wing and rotor-wing structures and
aerodynamics, including operation and performance.
2. Compare and contrast the different types of sheet-metal, non-ferrous materials and
structures in aircraft design and construction.
3. Demonstrate the techniques for sheet metal maintenance and repair, layout, forming,
repairs, and structural fasteners.
4. Differentiate and choose the various tools and procedures required for aircraft sheet
metal repair and welding.
5. Discriminate and describe the techniques for repairing; fabric used in aircraft
coverings, wood structures, composites, and plastics.
6. Identify and describe aircraft/helicopter controls, flight assembly and rigging systems.
7. Interpret and arrange the steps involved in painting and finishing an aircraft structure.
8. Define and describe the aircraft hydraulic and pneumatic assemblies and power
systems.
9. Explain the workings of aircraft landing gear systems, brakes, tires, and tubes.
10. Interpret and defend the importance of regulations and procedures relating to
preflight-major- annuals servicing, 337 Alterations and Repairs, maintenance, and
documentation.
978-1560277125
ISBN: 978-1-4338-0561-5
2
Revised: 6/20/2013
Suggested Supplemental Materials:
http://www.faa.gov/regulations_policies/handbooks_manuals/aircraft/amt_airframe_hand
book/
Grading:
Grade Grade
90 - 100 A (Superior)
80 - 89 B (Above Average)
70 - 79 C (Average)
60 - 69 D (Below Average)
Below 60 F (Failure)
Library:
The Jack R. Hunt Library, located on the Daytona Beach Campus, is the primary library for all
Worldwide Campus students.
Web: http://library.erau.edu
Phone: (800) 678-9428 (ext. 6947) or (386) 226-7656
(Voicemail is available after hours)
Hours: Monday - Friday, 8:00 a.m. - 5:00 p.m. EST
Email: http://library@erau.edu
Discussion (30%)
There are seven class discussion throughout the course. Class discussions are an integral part of
your learning in this course. You are both encouraged and expected to participate in online
discussions. Regular and meaningful contributions are part of your final course grade. Please
3
Revised: 6/20/2013
fully answer and discuss the topics within each discussion activity. Your degree of interaction
contributes to your Discussion grade.
For every graded discussion, it is expected that you will answer each question (one or more
paragraphs in length) and reply to at least two of your peers' postings. Be sure to include an
appropriate and correct in-text citation from the textbook and any other source you use to support
your response. Your in-text citations and reference list must be in accordance with the current
Publication Manual of the American Psychological Associate (APA).
Refer to the Discussion Rubric to identify the qualities of an effective post. You can view the
Discussion Rubric in the weekly discussion activities.
There are three pecha kucha assignments throughout the course. The assignments use a modified
10x20 Pecha Kucha approach, requiring a brief 10 slide presentation with 20 seconds of
discussion per slide either in audio or caption format. Refer to the Pecha Kucha Evaluation
Rubric (available via the drop-down menu) to make sure that you understand the requirements
for your submission. See Activity 1.2 - Introduction: Pecha Kucha for all additional Pecha
Kucha-related support.
There are five internet research assignments throughout the course. This information applies to
all "Internet Research" assignments and will not be repeated. In five short written assignments,
due in Modules 1, 3, 5, 7, and 9, you will conduct current event research. After conducting the
research online using the provided resources and others you locate on your own, you will write a
one - two page synopsis in a word-processing document.
Your submissions are expected to be grammatically sound, free of spelling errors, and formatted
according to the current APA edition (acceptable file types: .doc, .docx, or .rtf). Provide at least
one in-text citation and separate reference page to support your research for each assignment.
Your assignment will be submitted to the plagiarism detection tool Turnitin. If you have any
questions or concerns on citations or references, please refer to the current APA edition or ask
your instructor. Refer to the rubric within the assignment page to ensure that you have met the
intent and requirements of the assignment.
The case analysis assignments consist of four research asignments and three peer review
assignments where you provide a peer review of at least one classmates analysis. Each case
analysis the assignment link has the assignment requirements.
4
Revised: 6/20/2013
Assignments, Discussion Board Participation (If required for Blended Delivery), and/or
special administrative:
All assignments will be completed in a professional manner and on time, unless prior
arrangements have been made with the professor. Canvas assignments (if required) are graded
with class participation. This course includes weekly activities, each of which may have grade
points associated with them. Unless prior arrangements have been made with the instructor,
students are expected to participate each week, according to the course schedule. This is
especially important with regards to discussion activities. Weekly discussions typically include
both an initial posting and one or more substantive replies.
Note: Proper etiquette has to do with keeping it simple by using proper English and proper
spelling – spell check works well in Blackboard.
Course Policies:
ERAU is committed to the success of all students. It is a University policy to provide reasonable
accommodations to students with disabilities who qualify for services. If you would like to
request accommodations due to a physical, mental, or learning disability, please contact the
5
Revised: 6/20/2013
Worldwide Campus Disability Support Service Office at (888) 292-5727 or via email
wwdss@erau.edu or worldwide.disability.support.services@erau.edu.
Course Schedule:
Date Topic Learning Assignments
Outcome(s)
Meeting 1 Course Overview 1, 2, 3 Readings Crane – Chapters 1, 2
5 Nov (pgs 65-137)
Basic Aerodynamics
FAA AMT Handbook Chapter
Chapter 1 pgs1-1 thru 1-4
Chapter 2 pgs 2-1 thru 2-40
6
Revised: 6/20/2013
OL: 4.4 - Discussion:
Technology and Structural
Repair
7
Revised: 6/20/2013
4: Landing Gear Systems
F2F/OL: 8.4 - Discussion:
Aircraft Brake Systems and
Wheel Construction
Meeting 6 1,2,10 Readings
18 Dec
Aircraft Inspection •Standard Airworthiness (Links
to an external site.)
•Guide to Aircraft Inspection
(Links to an external site.)
Module 9 Presentation
OL: 9.3 Quiz Module 6-9
OL: 9.4 - Internet Research:
Aircraft Inspection and Repair
9.5 - Discussion: Aircraft
Inspection Regulations
F2F/OL: 9.6 - Pecha Kucha 3:
Personal Learning Goal
Reflection
8
Revised: 6/20/2013