3. Click on + button next to Revert To Base- Config and connect to clear line tab. It will close automatically in 5 Seconds.
4. Once clear line tab closes automatically
select all other tabs under Revert To Base-COnfig Folder and press Alt+B OR Enter 5. Once all 10 session connects in TAB. You will be able to use all ASA’s within 5 seconds of opening TABS.
6. Just make sure that you *DON’T CLOSE VIRTUAL
DEVICES TAB* it will close automatically in 5 minutes. *DON’T TOUCH THIS TAB*
7. SW2 will reboot so that it will take 4-5
minutes to come up. Don’t interrupt it for 5 minutes. Once you get SW2# prompt you can use it.
If you SW2 is blank put this command to load
config copy flash:/Lab1v5 running-config
& if SW2 is not connecting you can open terminal
server and put this command clear line 38
8. Open sessions from revert to Base-Config only
when you want to revert all devices to base- config. Other time open session from CONFIG or TSHOOT folder. Extra’s & Exception 1. FireAMP will be accessible from WirelessPC & date should be 25/05/2017 on Wireless PC. 2. to clear line of specific device open secure CRT open CONFIG TAB > Physical Devices > TERM-SRV. ASA1 = clear line 33 ASA2 = clear line 34 ASA3 = clear line 35 ASA4 = clear line 36 SW2 = clear line 38
3. AP is not accessible via console connection.
After successful authentication AP will join WLC automatically. telnet credentials for AP is admin/Cisc0123
4. To revert specific device login to vsphere on
150.1.7.250 CONFIG/Cisco@123
5. All Client machines will be accessible from RDP
Shortcut created on desktop.
6. If you are not able to access WSA GUI. Make sure
time is same on WSA & Canddiate PC. You can check time on WSA from this command date and time can be set from this command settime Device Credentials Device Username Password H/W S/W Version R1-R18 cisco cisco CSR1000V: 03.17.00.S ASAv cisco cisco ASAv: 9.6 (1) ASA cisco cisco ASA5515: 9.6(1) Switch cisco cisco WS-C3650-24PS: 03.07.04.E AP Cisco Cisco 1602I: 15.3.3 ISE admin Cisc0123 ISE: 2.1.0 FMC admin Cisc0123 FMCv: 6.1 NGIPSv admin Cisc0123 NGIPSv: 6.1 WLC admin Cisc0123 WLCv: 8.3.102 WSA admin ironport WSAv: 9.2.0 Client-PC CCIESEC Cisc0123 Windows 7 FireAMP root@cisco.com Cisco123 SOURCEfire v5.3.2016112815 IP-Phone - - 7965: 9.2(3) ESXI CONFIG Cisco@123 IP: 150.1.7.250 How to Revert TSHOOT LAB 1. Open Firefox from Candidate PC and open bookmark TSHOOT-EVE or 150.1.7.245.
2. Login with admin/eve.
3. From left hand side pane under more actions >
wipe all nodes wait till all nodes get greyed out.
4. Once all nodes get greyed out From left hand
side pane under more actions > start all nodes. 1. Client-PC is accessible from RDP shortcut on desktop names as TSHOOT- CLIENTPC 2. MABPC & DOT1xPC accessible from VNC Viewer. 3. All devices CLI consoles are accessible from Secure CRT TSHOOT folder 5 minutes after starting all nodes.