Anda di halaman 1dari 29

ZXG10 iBSC (V8.00.

00)
Engineering Data Configuration
Report
Product Type Technical Proposal

LEGAL INFORMATION

By accepting this certain document of ZTE CORPORATION you agree to the following terms. If you
do not agree to the following terms, please notice that you are not allowed to use this document.

Copyright © 2019 ZTE CORPORATION. Any rights not expressly granted herein are reserved. This
document contains proprietary information of ZTE CORPORATION. Any reproduction, transfer,
distribution, use or disclosure of this document or any portion of this document, in any form by any
means, without the prior written consent of ZTE CORPORATION is prohibited.

and are registered trademarks of ZTE CORPORATION. ZTE’s company name, logo
and product names referenced herein are either trademarks or registered trademarks of ZTE
CORPORATION. Other product and company names mentioned herein may be trademarks or trade
names of their respective owners. Without the prior written consent of ZTE CORPORATION or the
third party owner thereof, anyone’s access to this document should not be construed as granting,
by implication, estopped or otherwise, any license or right to use any marks appearing in the
document.

The design of this product complies with requirements of environmental protection and personal
Contract
security. This product shall be stored, used No.___________________
or discarded in accordance with product manual,
relevant contract or laws and regulations in relevant country (countries).
Project Name__________________
This document is provided “as is” and “as available”. Information contained in this document is
Client Company________________
subject to continuous update without further notice due to improvement and update of ZTE
CORPORATION’s products and technologies.

ZTE CORPORATION

Address: NO. 55
Hi-tech Road South
ShenZhen
P.R.China
518057
Website: http://dms.zte.com.cn
Email: TSM.Aftersales@zte.com.cn

ZTE Confidential Proprietary © 2011 ZTE Corporation. All rights reserved. II(30)
Product Type Technical Proposal

Revision History

Product Version Document Version Serial Number Reason for Revision


V8.00.00 R1.0 First published
Revised after R&D
R1.1
engineers’ review

Author

Prepared
Date Document Version Reviewed by Approved by
by
2010-07-26 R1.0 Cai Kai Zhou Jun Chen Qi
2011-3-8 R1.1 Zheng
Zhou Jun
Junhua

ZTE Confidential Proprietary © 2011 ZTE Corporation. All rights reserved. III(30)
Product Type Technical Proposal

About This Document

Summary
Chapter Description
1 Project Overview Introduces the general information of the project
2 System Networking Structure Introduces the system networking structure
3 iBSC Board Configuration Introduces the configuration of the boards in iBSC
4 Server Configuration Introduces the configuration of the Server
5 Engineering Data Configuration Provides the Engineering Data Configuration Report
Report

ZTE Confidential Proprietary © 2011 ZTE Corporation. All rights reserved. IV(30)
Product Type Technical Proposal

TABLE OF CONTENTS

1 Project Overview..............................................................................................1
1.1 Site Information..................................................................................................1
1.2 Project Scope....................................................................................................2
1.2.1 Scope of Original System...................................................................................2
1.2.2 Scope of New System........................................................................................2
1.3 Services Supported by Current System.............................................................2
1.4 Version of New System......................................................................................2
1.4.1 iBSC version......................................................................................................2
1.4.2 Background Version...........................................................................................3
1.4.3 Operation System & Database Version..............................................................3
1.4.4 Ethernet Exchanger Information........................................................................3
1.4.5 Router Information.............................................................................................3
1.4.6 Fire Wall Information..........................................................................................3
1.4.7 Version of Other Software..................................................................................3

2 System Networking Structure.........................................................................4


2.1 Networking Structure of iBSC Module................................................................4
2.1.1 iBSC Equipment Information..............................................................................4
2.1.2 iBSC Integrated Networking...............................................................................6
2.2 Background Networking Structure......................................................................7
2.2.1 Networking Chart...............................................................................................7

3 iBSC Board Configuration...............................................................................8


3.1 Board Configuration...........................................................................................8
3.1.1 Board Configuration of iBSC..............................................................................8
3.1.2 Board Configuration of iBSC (Remote TC).........................................................9
3.2 CMP/OMP Information.....................................................................................12
3.3 OMP Configuration File Content......................................................................12

4 Server Configuration.....................................................................................12
4.1 Chart of Server Rack.......................................................................................12
4.2 Background Server Configuration....................................................................13
4.2.1 Background Server Configuration Information.................................................13
4.2.2 Background Server Software Installation Information.......................................14
4.2.3 Magnetic Matrix................................................................................................14
4.2.4 Exchanger........................................................................................................14
4.2.5 Router..............................................................................................................14
4.2.6 IP Address Distribution Table...........................................................................15

5 Engineering Data Configuration Report.......................................................16


5.1 Engineering Data Configuration.......................................................................16
5.1.1 Version Upgrade Record..................................................................................16
5.1.2 Data Configuration...........................................................................................16

ZTE Confidential Proprietary © 2011 ZTE Corporation. All rights reserved. V(30)
ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

1 Project Overview

1.1 Site Information


Project Name
Client Name
Contract No.
Client Address
Tel. of
Zip code Fax.
Equipment Room
Project
Project Start Time
Finish Time
Contract Capacity
PIC of Contractor Contact No.
Technician of
Contact No.
Contractor
Pcanywhere Maintenance
Username and Private Line
Password
PIC of ZTE Contact No.
Commissioning
Contact No.
Engineer of ZTE
Local Office of ZTE Hotline
Design Company of Contact
this Project Person/Tel.
Construction
Contact
Company of this
Person/Tel.
Project
Supervision and
Contact
Inspection Company
Person/Tel.
of this Project
Brief Introduction of this Project

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 1


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

Describe the general status and milestones of the project here.

1.2 Project Scope

1.2.1 Scope of Original System

Describe the scope of the original system.

1.2.2 Scope of New System

Describe the scope of the new system after completing this project.

1.3 Services Supported by Current System


Describe the services that supported by current system.

1.4 Version of New System


Describe the related version of the new system after completing this project.

1.4.1 iBSC version


iBSC Hardware
Sequence iBSC SN iBSC Software Version No.
Version
1
ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 2
ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

2
3
4
5

1.4.2 Background Version


Sequence Server Name iOMCR Version No. OMCB Version No.
1
2
3

1.4.3 Operation System & Database Version


Version No. of
Sequence Server Name Database Version
Operation System
1
2
3

1.4.4 Ethernet Exchanger Information


Describe the name, type and configuration information of the exchanger.

1.4.5 Router Information


Describe the name, type and configuration information of the router.

1.4.6 Fire Wall Information


Type IOS Version No.

1.4.7 Version of Other Software


Server Name Software Name Version No.

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 3


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

Client Name Software Name Version No.

2 System Networking Structure

2.1 Networking Structure of iBSC Module

2.1.1 iBSC Equipment Information


In this project, _________ (how many) ZXG10 iBSC(s) is/are involved, they are named
as iBSC______, iBSC______, and iBSC______ (If there are more than 1 iBSC, fill the
ID of iBSCs in the blank area to identify them respectively).

iBSC______ (its ID) is comprised by the control frame and _______(how many) RCBU
basic configuration unit.

The A interface of iBSC______ (its ID) is connected with the upper level MSC via the
_______ transmission manner and the matched impedance of E1 is _______ohm. The
Gb interface is connected with the SGSN via the _______ transmission manner and the
matched impedance is _______ohm. The transmission of Abis interface is ________,
and the matched impedance of E1 is _______ohm.

The information of iBSC equipment is shown as below:

Number of Number
Instal Numb Number Numb Number of
Number of
iBSC lation PCM/ STM- er of of 2M er of PCM/ FE
SN of PCM/EF
No. Positi 1/FE at A No7 Signalin Sigtra at Abis
RCBU at Gb
on interface Link g Link n interface
interface

1 iBSC1

2 iBSC2

3 iBSC3
4 iBSC4
5 iBSC5

6 iBSC6

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 4


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

7 iBSC7

8 iBSC8

The networking of a single iBSC is shown as below:


Numb Affiliat Node Transmissio Number
Site er Number Affiliat of
iBSC SITE ed n of
Nam of ed
ID ID of Modul Upper Equipment Trunk
e TX RCBU e
BTS Level Type Line
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   
                   

Notes: This form is duplicable.

2.1.2 iBSC Integrated Networking

The integrated networking of iBSC is shown as below:

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 5


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 6


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

Notes: The integrated networking of iBSC generally includes the following contents: draw the original and new MSC

relative locations of this project marked with the ID, equipment type and location, the relative location of iBSC and

installation position. Indicate the number of A interfaces and SS7 links between MSC and iBSC, whether the TC of

each iBSC is remote, the number of Abis interface. Indicate the equipment type of the transmission system.

2.2 Background Networking Structure

2.2.1 Networking Chart


iOMCR uses the _________ networking manner, including _________ (how many)
server(s) and _________ (how many) Client(s).

The iOMCR networking (sample) is shown as below:

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 7


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

Notes: The networking of OMCR generally includes the following items: the connecting relationship of MSC, iBSC,

BTS, Server, Client and Alarm Box in this project. If it is remote networking, indicate the connecting relationship and

relative location of exchanger and router. The name, type, configuration and version information of each equipment in

this project. For GPRS commissioning, indicate the connecting relationship of iBSC and SGSN, and the number of E1

at Gb interface. Indicate the traffic volume of iBSC, number of A interfaces between MSC and iBSC and number of

SS7 link.

3 iBSC Board Configuration

3.1 Board Configuration

3.1.1 Board Configuration of iBSC


Board configurations of ZXG10 iBSC rack:

Installation location: __________, equipment room name: ________, rack number:


________, module number: ________.

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 8


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Notes: If there is more than 1 iBSC rack, this table is duplicable.

3.1.2 Board Configuration of iBSC (Remote TC)

If TC is remote, the board configuration of iBSC rack at the near end is shown as below:

Installation location: __________, equipment room name: ________, rack number:


________, module number: ________.

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 9


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

If TC is remote, the board configuration of iBSC rack at the near end is shown as below:

Installation location: __________, equipment room name: ________, rack number:


________, module number: ________.

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 10


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Board Information
Hardware Vital Chip Software
Board Name Number
Version Type Type Version Type

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 11


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

Notes:

1. If different versions are used for the same board, indicate them respectively.

2. The same board may include many vital chips of different type, indicate the type respectively.

3.2 CMP/OMP Information


Module Hard Disk
Hard disk Type CPU Type
No./Frame/Slot Capacity

3.3 OMP Configuration File Content


Contents of Zxg10.cfg file.

4 Server Configuration

4.1 Chart of Server Rack


Installation position: ________, equipment room name: ________

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 12


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

Power splitter

Disk array

Monitor

KVM
Keypad

Server

Notes: Draw it according to the actual situation. If there is no server rack, delete this page. This page is duplicable.

4.2 Background Server Configuration

4.2.1 Background Server Configuration Information


CPU Hardware
Type/Serial Main
Server Name Memory
Number Number Freque Number Capacity
ncy

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 13


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

4.2.2 Background Server Software Installation Information


Local Domain
Server IP Domain Workgrou
Node Account/Pa Account/P
Name Address Name p Name
ssword assword

4.2.3 Magnetic Matrix


Hard Disk Number of
Producer Type RAID Manner
Capacity Hard Disk

4.2.4 Exchanger
Producer Type User Name Password

Notes: If the exchanger is not provided and maintained by ZTE, leave the user name and password as blank.

4.2.5 Router

Producer Type IP User Name Password

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 14


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

Producer Type IP User Name Password

Notes: If the router is not provided and maintained by ZTE, leave the user name and password as blank.

4.2.6 IP Address Distribution Table


In this project, the IP address of ZTE equipment (sample) is distributed as below:
Equipment IP Address (Segment) Subnet Mask
XXXX Equipment Room 10.175.54.16~23
OMCR Server 10.175.54.18 [Mno=129] 255.255.255.248
Client 1 of Central Equipment
10.175.54.19 255.255.255.248
Room
Client 2 of Central Equipment
10.175.54.20 255.255.255.248
Room
Ethernet Port of Router 10.175.54.17 255.255.255.248
E1 Port of Router 10.175.54.25 255.255.255.248
Gateway of Upper NM 10.175.54.21 255.255.255.248
Reserved Address 1 (For
10.175.54.22 255.255.255.248
maintenance)
XXXX Equipment Room 10.175.54.0~15
iBSC OMP 10.175.54.2 255.255.255.240
iOMCR internal network IP
iOMCR external network IP
OMCB IP
Alarm Box IP 10.175.54.14 255.255.255.240
Client 1 10.175.54.6 255.255.255.240
Client 2 10.175.54.7 255.255.255.240
Ethernet Port of Router 10.175.54.1 255.255.255.240
E1 Port of Router 10.175.54.26 255.255.255.248
Reserved Address 1 ( for iBSC
10.175.54.5 255.255.255.240
expansion)
Reserved Address 2 ( for iBSC
10.175.54.11 255.255.255.240
expansion)

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 15


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

5 Engineering Data Configuration Report

5.1 Engineering Data Configuration

5.1.1 Version Upgrade Record


Original Current
Upgrade Date Update Results Remarks
Version Version

5.1.2 Data Configuration

5.1.2.1 Interconnection Data Configuration at A Interface


Configuration Data at BSC Value Remarks
 
Side
Interconnection BSC Signaling Point Code, 14    
Data at E1 A Bit/24 Bit
Interface MGW Signaling Point Code, 14   It is needed when MGW is used as
Bit/24 Bit, Type STP forwarding signaling.
MSC Signaling Point Code, 14   It is classified into domestic type,
Bit/24 Bit, Type domestic standby type, international
type and international standby type.
Signaling Sub-system   0, 1, 254

Type of Signaling Link   64K narrowband signaling link group,


n*64K narrowband signaling link
group, and 2M narrowband signaling
link group; the E1 interface used in
2M signaling link doesn’t need to be
configured on N7PCM, and it is
necessary to negotiate with the other
party to determine which physical link
it shall be configured in.
Circuit where No. 7 Signaling   The number of time slot is applicable
Link is located, Start and End to n*64K narrowband signaling link
Time Slot, Time Slot Quantity group
No. 7 Signaling Link Code SLC    
No. 7 Signaling Correction   Basic method and cyclic
Method retransmission method

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 16


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

N7PCM Number   Total E1 number in A interface truck


circuit
Initial code of N7PCM   Initial code of PCM (Used for
Determining CIC, CIC=PCM
Code*32+ Time Slot No.)
E1 Matched Impedance   75ohm/120ohm
E1 CRC Mode   no CRC/CRC
Fiber Reuse Structure   ITU AU-4/ITU AU-3/SONET STS-3;
Required in case of optical interface
interconnection.
PCM Rank Mode   ITUT G.707/Tributary; Required in
case of optical interface
interconnection.
APS Protection Type   1:1/1+1; Required in case of optical
interface interconnection and optical
fiber APS protection.
Mobile Country Code, Mobile    
Network No., Location Area, Cell
MNC3Digits   0 means 2 bits network No. is used,
while 1 means 3 bits network No. is
used.
MSC Version   R99 and below or R4 and above
BSC Signaling Point Code, 14    
Bit/24 Bit
MGW Signaling Point Code, 14   It is needed when MGW is used as
Bit/24 Bit, Type STP forwarding signaling.
MSC Signaling Point Code, 14   It is classified into domestic type,
Bit/24 Bit, Type domestic standby type, international
type and international standby type.
Signaling Sub-system   0, 1, 254
IP Address at Control Panel Side   Configure service address of control
(SCTP) panel into RPU address.
Interconnection IP Address at Opposite Side of    
Data at IP A Control Panel
Interface Local Port No. (SCTP)    
Port No. of Opposite Side    
(SCTP)
IP Address of Interface Board   Interface Address of Control Panel
Static Route    
SCTP Application Attribute   Server and Client
SCTP Protocol Type   Set it as M3UA
AS Application Server Used   SGP, ASP, IPSP_SERVER,
Identifier IPSP_CLIENT
AS Routing Context Identifier    

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 17


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

IP Address of User Plane   Configure it as RPU address for


sharing with IP address of control
panel
Mobile Country Code, Mobile    
Network No., Location Area, Cell
MNC3Digits   0 means 2 bits network No. is used,
while 1 means 3 bits network No. is
used.
MSC Version   R99 and below or R4 and above
E1 BSC Signaling Point Code, 14    
Interconnection Bit/24 Bit
Data at Flex A MGW Signaling Point Code, 14   It is needed when MGW is used as
Interface Bit/24 Bit, Type STP forwarding signaling.
MSC Signaling Point Code, 14   It is classified into domestic type,
Bit/24 Bit, Type domestic standby type, international
type and international standby type.
Signaling Sub-system   0, 1, 254
Signaling Link Type   64K narrowband signaling link group,
n*64K narrowband signaling link
group, and 2M narrowband signaling
link group;
Circuit whether No. 7 Signaling   The time slot quantity is applicable to
Link is located, Start and End n*64K narrowband signaling link.
Time Slot, Time Slot Quantity
No. 7 Signaling Link Code SLC    
No. 7 Signaling Correction  
Method Basic method and cyclic
retransmission method
N7PCM Quantity    
N7PCM Initial Code   Initial code of PCM (Used for
Determining CIC, CIC=PCM
Code*32+ Time Slot No.)
E1 Matched Impedance   75ohm/120ohm
E1 CRC Mode   no CRC/CRC
Fiber Reuse Structure   ITU AU-4/ITU AU-3/SONET STS-3;
Required in case of optical interface
interconnection.
PCM Rank Mode   ITUT G.707/Tributary; it is needed in
case of optical interface
interconnection.
APS Protection Type   1:1/1+1; it is needed in case of fiber
APS protection.
Mobile Country Code, Mobile    
Network No., Location Area, Cell

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 18


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

MNC3Digits   0 means 2 bits network No. is used,


while 1 means 3 bits network No. is
used.
MSC Version   R99 and below or R4 and above
MSC CN ID    
MSC NRI Length    
MSC NULL NRI ID    
MSC NRI    
MSC Load Sharing Proportion    
BSC Signaling Point Code, 14    
Bit/24 Bit
MGW Signaling Point Code, 14   It is needed when MGW is used as
Bit/24 Bit, Type STP forwarding signaling.
MSC Signaling Point Code, 14   It is classified into domestic type,
Bit/24 Bit, Type domestic standby type, international
type and international standby type.
Signaling Sub-system   0, 1, 254
IP Address at Control Panel Side   Configure it into RPU address
(SCTP)
IP Address at Opposite Side of    
Control Panel (SCTP)
Local Port No. (SCTP)    
Port No. of Opposite Side    
(SCTP)
IP Address of Interface Board   Interface Board Address
IP
Static Route    
Interconnection
Data at Flex A ASP Application Attribute   Server and Client
Interface ASP Protocol Type   Configure it into M3UA
AS Application Server Used   SGP, ASP, IPSP_SERVER,
Identifier IPSP_CLIENT
Routing Context ID    
IP Address of User Plane   Configure it into RPU address which
can be shared with IP address of
control panel
Mobile Country Code, Mobile    
Network No., Location Area, Cell
MNC3Digits   0 means 2 bits network No. is used,
while 1 means 3 bits network No. is
used.
MSC Version   R99 and below or R4 and above
MSC CN ID    
MSC NRI Length    
MSC NULL NRI ID    
ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 19
ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

MSC NRI    
MSC Load Sharing Proportion    

5.1.2.2 Interconnection Data Configuration at Gb Interface


Configuration Data at Value Remarks
 
BSC Side
Network Service Entity    
ID (NSEI)
Network Service Virtual    
Connection ID (NSVCI)
Interconnection Data Time Slot No. of Bearer    
at E1 Gb Interface Channel (BRCH)
Logic Link ID (DLCI)    
Router Area Code (RAC)    
Location Area Code    
(LAC)
iBSC Virtual Address   RPU Address, namely Service Address
IPGB Interface Board   Interface Panel Address
Address Configuration
Static Route   Configure it only when there is network
section of non-big network in interface
panel address.
Network Service Entity   Choose IP bearer method and static
(NSEI) configuration. If choosing dynamic
configuration, it is necessary to configure
Interconnection Data preset SGSN address.
at IP Gb Interface
Home Node    
Configuration
Remote Node    
Configuration
Route Area Code (RAC)    
Location Area Code    
(LAC)
Preset SGSN Address   Use it when NSEI is dynamic
configuration.
E1 Interconnection Network Service Entity    
Data at Flex Gb ID (NSEI)
Interface Network Service Virtual    
Connection ID (NSVCI)
Time Slot No. of Bear    
Channel (BRCH)
Logic Link ID (DLCI)    
Route Area Code (RAC)    
Location Area Code    
(LAC)
SGSN CN ID    
SGSN NRI Length    
SGSN NULL NRI ID    
SGSN Version    

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 20


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

SGSN Load Sharing    


Proportion
iBSC Virtual Address   RPU Address, namely Service Address
IPGB Interface Board   Interface Board Address
Address Configuration
Static Route   Configure it only when there is network
section of non-big network in interface
panel address.
Network Service Entity   Choose IP bearer method and static
ID (NSEI) configuration. If choosing dynamic
configuration, it is necessary to configure
preset SGSN address.
Home Node    
IP Interconnection Configuration
Data at Flex Gb Remote Node    
Interface Configuration
Route Area Code    
Location Area Code    
Preset SGSN Address   Use it when NSEI is dynamic
configuration.
SGSN CN ID    
SGSN NRI Length    
SGSN NULL NRI ID    
SGSN Version    
SGSN Load Sharing    
Proportion

5.1.2.3 iOMCR Server Data Configuration

In this project, (how many) iOMCR server(s) is/are involved.

Installation Position of OMC-R Server:

Computer Type
Computer
Configuration
(CPU/Memory/H
ard Disk)
Server SN
Server IP
Address
OMCR SERVER OMCR CLIENT
Username/pass username/pass
word word
Database
username/passw
ord

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 21


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

Installation Position of OMC-R Server:

Computer Type
Computer
Configuration
(CPU/Memory/H
ard Disk)
Server SN
Server IP
Address
OMCR SERVER OMCR CLIENT
Username/pass username/pass
word word
Database
username/passw
ord
Installation Position of OMC-R Server:

Computer Type
Computer
Configuration
(CPU/Memory/H
ard Disk)
Server SN
Server IP
Address
OMCR SERVER OMCR CLIENT
Username/pass username/pass
word word
Database
username/passw
ord
Installation Position of OMC-R Server:

Computer Type
Computer
Configuration
(CPU/Memory/H
ard Disk)
Server SN
Server IP
Address

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 22


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

OMCR SERVER OMCR CLIENT


Username/pass username/pass
word word
Database
username/passw
ord
Notes: This page is duplicable

5.1.2.4 OMCR Client Data Configuration

In this project, (how many) iOMCR client(s) is/are involved.

Installation Position of OMC-R Client:

Computer Type
Computer
Configuration
(CPU/Memory/Har
d Disk)
Client SN

Client IP Address
System
username/passwo
rd
Installation Position of OMC-R Client:

Computer Type
Computer
Configuration
(CPU/Memory/Har
d Disk)
Client SN

Client IP Address
System
username/passwo
rd
Installation Position of OMC-R Client:

Computer Type
Computer
Configuration
(CPU/Memory/Har
d Disk)

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 23


ZXG10 iBSC (V8.00.00) Engineering Data Configuration Report Internal Use Only▲

Client SN

Client IP Address
System
username/passwo
rd
Notes: This page is duplicable.

ZTE Confidential Proprietary © 2019 ZTE CORPORATION. All rights reserved. 24

Anda mungkin juga menyukai