17 (6-Apr-09)
Please note that this release is intended to install AVEVA Global on a server only. It may also be
installed on AVEVA Plant or Marine workstations as an option when using the new combined
installers for the relevant product set – see installation notes below.
The separately licensed products or product components installable from or upgraded by this
release are as follows:
Product Version
Product Name
Code Number
V00FN246 /
AVEVA Global Hub 12.0.SP4
V00FN974
V00FN247 /
AVEVA Global Satellite 12.0.SP4
V00FN975
Please note that recommended/supported hardware and software configurations are constantly subject to review, so
please consult the AVEVA support web pages for the latest recommendations.
For further information please contact your local AVEVA support office, which can be found at
http://support.aveva.com
File: d51855.doc
Last saved: 11-Jun-2009 Copyright 2009 AVEVA Solutions Limited Page 1 of 3
Product Release Letter
Prerequisite for this release - products:
Flexman 4.1 and an appropriate Flexman licence.
For further details of Flexman License Server 4.1, please see http://support.aveva.com.
For full details, please refer to the AVEVA Plant 12.0 Minimum System Requirements manual.
Supersedes:
This release supersedes the previous full release 51797 AVEVA Global 12.0.SP3 and earlier.
This release installs AVEVA Gloval server only. If other products are also required, there is now a
combined installer for PDMS and associated products, with an option for Global. It can be
configured by using the check boxes to install a selection of products; it may also be used to add
additional ones or remove them at a later date. The Global tick-box installs the necessary support
for Global use of PDMS; alongside PDMS, and also the Global server.
List of Enhancements
This release includes many enhancements, in particular to Global update (performance and
functions) and to the PDMS Admin operations used by Global.
For full details, please see the PDMS User Bulletin, which also covers some of the associated
products, and the updated Global manuals included with this release.
For full details, please see the PDMS User Bulletin and the updated Global manuals included with
this release.
Development Testing
Developers have carried out unit testing of each enhancement and/or fix in the development
environment to verify that any new functionalities have been correctly implemented and identified
defects have been corrected.
Regression tests have been run in the development environment to verify that enhancements
and/or fixes have not adversely affected the integrity of the product.
System Testing
Independent system testing has been carried out on the product, as released, to verify that it
installs correctly in all supported configurations and that product functionality operates as
intended, subject to a known exceptions listed below.
Acceptance Testing
This document has been prepared before Acceptance Testing. This product release will be
subjected to an acceptance test by AVEVA’s Group Solutions Centre.
Any exceptions found during Acceptance Testing or after release will be reported in the Product
Release Latest Update Note on AVEVA's support web site
http://downloads.aveva.com/51855/w51855.pdf.
For the latest list of exceptions and other updates, please see the Product Release Latest Update
Note on AVEVA's support web site http://downloads.aveva.com/51855/w51855.pdf.