EPOLINE
EPOXY TANK LINING
(SOLVENT BASED TWO COMPONENT)
CODE NUMBER
EE-101 WHITE
DESCRIPTION
This is an epoxy-based coating especially formulated for application as lining for the interior surfaces
of water tanks. Its epoxy base is water-resistant, chemical-resistant and abrasive-resistant. It is ideal for
long-range submerged applications, such as the interior of concrete or steel water tanks, cisterns and indoor
swimming pools and fish ponds. It is applicable for drinking water tanks and cisterns interiors. It is also
applicable for condominium and commercial building sewage treatment plant concrete tank linings. Being part
of a complete coating system it must be used with the proper epoxy-based primer and sealer. Its adhesion is
superior as is its resistance to water-borne particle abrasion. It does not contain any water-soluble pigments.
The attractive finish helps maintain a clean surface interior and makes the task of cleaning easier. It projects
cleanliness and sanitation. It is two (2) component – Part A, Base and Part B, Catalyst. Reduce only with
Destiny Epoxy Reducer.
COLOR
White only.
FINISH/ SHEEN
Gloss.
Light sand in between coats to remove the gloss prior to applying second coats. Do the sanding
immediately after the six (6) hours after the application since it may be too hard to sand after six (6) hours.
Properly primed metal or concrete. For interior of tanks only. Will chalk or lose its gloss with
prolonged exposure to sunlight.
THINNER/ REDUCER
TINTING COLOR
Do not tint.
APPLICATION
Thirty (30) to forty (40) Square Meter per 4 Liter on plain surface
DRYING TIME
Six (6) hours. Sixteen (16) to forty-eight (48) hours before recoating. Light sand in between coats to
remove the gloss. Do the light sanding immediately after six (6) hours or coating may become too hard to
sand.
MIXING INSTRUCTIONS
Stir the Part A Base well. Then slowly pour all of the Part B Catalyst into the Part A can slowly and stir
very well. Allow the mixture to stand for a ten (10) to twenty (20) minute Induction Period. Stir the mixture
very briefly every five (5) minutes just to move the mixture. Slowly add Destiny Epoxy Reducer until the
desired viscosity is attained. Stir very well.
PACKAGING
All two (2) containers are conveniently packaged in one (1) vertical carton with handle for easy handling, and
for minimizing mix-up of components with other products during storage and mixing.
CAUTIONS
NOTE: Epoline is acceptable as topcoat for interior of water tanks for drinking purposes.
RECOMMENDED PRIMERS:
FOR CONCRETE: Destiny Epoprime Water-based Epoxy Primer and Masonry Waterproofer
(Parts A, B and C)
FOR STEEL: Destiny Epoxy Primers White, Gray or Red Oxide (Parts A and B) – Solvent-
based. Reduce with Destiny Epoxy Reducer only.
(10/25/12)