Fnt' = Nominal tensile stress modified to include the effect of shear stress (MPa)
Fnt= Nominal tensile stress as Table J3.2(MPa)
Fv= Nominal shear stress as Table J3.2(MPa)
fv= Required shear stress
Ω = Safety Factor = 2 (ASD)
ANLYSIS RESULTS
1 SHEAR FORCE( DL+SL+L) = 650 KN
2 AXIAL FORCE = 1 KN
BEARING STRENGTH AT BOLT HOLES IS MIN OF Rn2(bolt bearing) and , Rn2(plate shear)
= 397 KN
BEARING STRENGTH AT BOLT HOLES
Fnt' = Nominal tensile stress modified to include the effect of shear stress (MPa)
Fnt= Nominal tensile stress as Table J3.2(MPa)
Fv= Nominal shear stress as Table J3.2(MPa)
fv= Required shear stress
Ω = Safety Factor = 2 (ASD)
ANLYSIS RESULTS
1 SHEAR FORCE( DL+SL+L) = 650
2 AXIAL FORCE = 1
3 Fv = 330
4 fv = Fv/Ω = 330/2 = 165
STRENGTH OF BOLT IN SHEAR
Rn = min (
Take = 10
12 Check the bolts in tension
therefore Allowable force is greter than the actual force, hence the design is safe
Provide 12 nos of 32 mm dia bolts
KN
KN
MPa
MPa
sq.mm
KN
nos
KN
KN
KN
KN
nos
KN
KN
nos
KN
KN