A B
C D
4. If any thinning indication, make gridding in area thinning found. The gridding area shall follow API
510 rule.
Note: To set the same perception, 3 o’clock position is always at name plate side.
Bottom Elbow UT Inspection
Elbow Inspection:
1. Divide elbow into 4 quadrants: B-IN (Bend Intrado), B-EX (Bend Extrado), B-S1 (Bend Side 1) & B-
S2 (Bend Side 1).
4. If any thinning indication, make gridding in area thinning found. The gridding area shall follow API
570 rule.
Note: To set the same perception, location of quadrant BS-1 & BS-2 are divided based on fluid flow
as shown in the picture above.