How to assist.
1. Press reset
2. Wear gloves
3. Gently push the leadframe to the roller
4. Press start
How to assist.
1. Press reset
2. Check the actual position of the leadframe
3. Move the leadframe to the marking stopper
4. Press start
How to assist.
1. Click cancel
2. Wear gloves
3. Get the affected LF at reject sample box
4. Put the leadframe at the cassette
5. Load at loader section
6. Press reset
7. Press start
1. Press reset
2. Wear gloves
3. Push the leadframe to the output cassette
4. Press start
How to assist.
1. Press reset
2. Wear gloves
3. Remove the leadframe from STP1
4. Correct the orientation of the leadframe and
return to STP1
5. Press start.