T24C1
20 000 m3 Chemical & Product Tanker
Brief description
GENERAL
T24C1
20 000 m Chemical & Product Tanker
The FKAB T24C1 is a 20 000 m3, TIER III oil product tanker for chemicals (IMO II
and III) and oil products. It is designed for low fuel consumption and high cargo
capacity with a density of 1,54 ton/m3 in an SECA area trade. The hull form is
designed for good performance in harsh weather conditions. The tanker is designed
for European waters considering the Stanlow locks, St. Lawrence Seaways, draught
restriction in various ports and keeping the total length below 150m. Vessel is
divided into 12 cargo tanks, of which one is dedicated for slop and 2 drain tanks on
deck. Complying with 12 grades.
The vessel is designed for good performance with Finnish/Swedish ice class 1A.
3
Propulsion is provided by a medium speed dual fuel engine with a gearbox with PTI/
PTO and shaft generator coupled to a CP propeller in nozzle. PTI ‘Take me home’
device through PTI from the auxiliaries. In order to save fuel the shaft generator is
running on various rpm allowing optimum propeller rpm at various speeds.
The general T24 design is obtainable with various main particulars, considering
restriction in ports and channels, with two and four stroke main engines, with steam
or thermal oil heating, electrical or hydraulic driven cargo pumps, propeller with
nozzle or without and with auxiliary engines tailor-made to customer demands.
2
MAIN PARTICULARS
Service speed 13,0 knots at draught 8,85m, 80% MCR with 15% sea margin and shaft generator output of 300 kW.
Fuel consumption at 13,0 knots including shaft generator without sea margin, LNG 11,3 ton/day and pilot fuel of 0,13
ton/day. Fuel consumption at 13,0 knots including shaft generator without sea margin MGO 13,7 ton/day
Length over all 149,9 m Main engine Four stroke Dual Fuel abt
4,500 kW at abt 750 rpm
Length between pp 145,9 m
Aux engines 1 x 600 kW and 1 x 1,500 kW
Breadth mld 22,8 m
Shaft generator 1,800 kW
Depth mld 12,10 m
One oiled fire steam boiler of 7600 kW and one
Draught design 8,85 m combined oil fired /exhaust-gas steam boiler
Draught scantling 9,40 m Bow thruster 850 kW
Deadweight at design draught 16,300 tonnes Cargo pumps 12 x 300 m3/h
Deadweight at scantling draught 18,000 tonnes Ballast pumps 2 x 500 m3/h
Cargo capacity 20,000 m3 Loading rate 1,200 m /h per tank pair
3
CLASS
Bureau Veritas*+ HULL, +MACH, Oil Tanker, Chemical Tanker-duelfuel , ESP, Unrestricted Navigation, Ice 1A,
AUT-IMS , SYS-IBS-1,MON-Shaft, VCS, INWATERSURWAY, CLEANSHIP, EWCT,BWT,AVM-APS,IG.
3
General:
The vessel is an ice strengthened Oil & Chemical Tanker of ship type 2, designed
for twelve segregations.
The vessel is divided in forepeak, bow thrusters room, 2 x 6 tanks for cargo and
double hull tanks for water ballast, engine room, after peak with steering gear
room.
Double hull water ballast tanks are arranged in the whole length of the cargo
area. The water ballast tanks are of L-shaped type except for one set of tanks
that will be divided in bottom tanks and wing tanks.
The vessel is designed to burn primary Liquefied natural gas (LNG) with fuel
oil as pilot fuel and backup fuel. As an option the vessel is equipped for normal
heavy fuel oil operation, i.e. IFO380. The medium speed four stroke main engine
is capable of running on LNG and fuel oil, both MGO and IFO 380 sCt. LNG
storage tanks for fuel are located on weather deck forward.
3
The auxiliaries are used also for “take me home” device through the shaft
generator to the propeller. SCR systems for aux engines are arranged.
One closed longitudinal pipe tunnel between the poop and forecastle is
arranged, protecting the cargo system, cables and essential equipment and
pipes. A whale back is arranged on forecastle deck protecting equipment from
ice and green sea.
Oil tanks are protected against shell with void spaces or cofferdams for technical
freshwater.
Cargo
The cargo space to be divided into twelve cargo tanks, one of them dedicated for
slop.
The cargo tanks are designed for a maximum specific gravity of 1,54 t/m3, of
IMO II and III type and designed for a temperature between -10°C to 80°C. To
improve cleaning no stiffeners, stringers, web frames, brackets etc inside the
cargo/drain tanks.
For cargo spill on the weather deck as well in the pipe tunnel two circular
cargo/deck drain tanks with separate pumps are arranged. Residuals after
tank cleaning will also be collected in these tanks. The tanks are arranged on
upper deck. One drain pump for deck spill is arranged.
4
Cargo Handling system
All systems for cargo handling, heating control, level monitoring etc to be carried out
from the cargo control station in the wheelhouse. Cargo loading and discharging shall
be performed through the cargo manifolds at midship area. The ship are equipped
with 12 hydraulic or electric operated deep well cargo pumps, one pump for each
cargo and slop tank. If electric, it shall be fed from a frequency converters.
Each pump in the cargo/slop tanks to be mounted in a suction well made of stainless
steel.
The discharging capacity for each cargo pump is 300 m3/h at a pressure of 120 mLC
and spec gravity of 0,8 tonnes/m3.
The cargo handling system will be segregated in six (6) grades of cargoes. It is
possible using any converter to any pump. Cargo drain tanks are equipped with
electrical driven centrifugal pump for discharge of these tanks. Capacity of pump min
70 m3/h.
All cargo tanks have separate suction and drop lines and to have one separate
connection line to the manifold and overboard.
All manifolds are connected to each other via a double valve for segregation. Size (10”),
one of 12”.
Loading capacity
The total loading capacity to be min 1,200 m3/h delivered to any 2 tanks through any
cross over.
Loading capacity when loading through no 4 manifold to be 1,800 m3/h
Maximum discharge rate: 1,800 m3/h
5
Design criteria for the heating system
1. Cargo
Heating of cargo from 44°C to 66°C in 96 hours with seawater temperature
of -2°C and an air temperature -20°C. Maintaining cargo tank temperature at
70°C with seawater temperature of -2°C and an air temperature -20°C.
T24C1
20 000 m Chemical & Product Tanker
4. WB tanks
For keeping all WB-tanks free from ice during wintertime - compressed air to
be used (about 2 bar). The air bubble system to be divided in groups for each
3
Main Engine
Main engine shall be a four stroke, single acting, dual fuel engine.
Engine to fulfil IMO tier III in gas mode and to be of Dual fuel type. The
engine shall run on either LNG with MGO as pilot fuel or HFO.
Propeller
One 4-blade CP propeller made of Ni-Al-Bronze, abt 96 rpm at design speed
and to be of low noise type. Propeller diameter 5,0 m.
6
Shaft generator
One single marine gearbox with vertical offset is installed.
The gearbox to be fitted with a PTO/PTI and a shaft generator.
The shaft from main engine is equipped with clutch for PTI “Take me Home” operation in
case of main engine break down. It is possible to disconnect the main engine within the
time required by class.
Crew
19 single cabins to be arranged in the deckhouse, each with a separate WC/shower
room.
Others
The rudder is double plated, all welded, streamlined and balanced of spade type. The
rudder is highefficent, twisted-leading edge with conical construction and with a hub.
One Bow thruster, electrical CPP bow thruster of about 850 kW. Except the free fall life
boat one high-speed rescue/working boat with an inboard diesel engine is provided.
7
Successful Ship Designs Since 1961
Innovation, Passion & Reliability
www.fkab.com
20160607