Anda di halaman 1dari 1

FB-02YS(ST)YQY-FL Foundation Fieldbus

armoured cable

Ident.-no.: 79230000
Standard: IEC 61158 Part 2
Classification: Type A
Interface: IEC 61158

Use:
In wet and dry industrial locations, for fixed installation indoor and outdoor,
on trays, racks, in conduits and direct burial without chemical
contamination
Application:
Fieldbus cable for Foundation Fieldbus with additional power supply for
the devices

Construction
Conductor: solid bare copper, 1.13 mm (1.0 mm²)
Insulation: cellular polyethylene with skin layer of polyethylene
Colour code: a-core: blue, b-core: orange
Screen: one side plastic coated aluminium tape, in contact
with a tinned copper drain wire (0.5 mm²)
Bedding: PVC, colour: orange
Armour: galvanised steel wire braid acc. to IEC 60092-3 in
contact with an earthing lead of tinned copper
Outer sheath: polyvinyl chloride PVC, colour: orange
Cable marking: KERPEN, IEC 61158-2 31.25 kbit/s FIELDBUS
CABLE

Physical properties:
max. pulling tension: 780 N
min. bending radius: 10 x overall diameter
Temperature range: -40°C up to + 70°C during operation
-5°C up to + 50°C for installation
Oil resistant: ICEA S 61-402
Flame retardancy: IEC 60332 part 3
UV-resistance: UL 1581 section 1200
Electrical properties at 20°C:
Conductor resistance (Loop) max. Ω/km 36.8
Screen resistance max. Ω/km 30
Mutual capacitance: nom. NF/km 60
Capacitance unbalance to earth max. PF/km 2000
Impedance Ω 100±20
Attenuation at 39 kHz max. dB/km 3,0
Propagation delay change (7,9 kHz - 39 kHz) max. µs/km 1,7
Test voltage (Core/core and core/screen) V 1000
Operating voltage max. V 300
Geometrical data
No. of RT of bedding Dia. over Dia. of armour RT of Overall Weight
pairs bedding wire outer sheath Diameter
nom. approx. nom. nom. approx. approx.
(mm) (mm) (mm) (mm) (mm) (kg/km)
1 1.0 7.1 0.3 1.3 11.0 180

Ki/Sch/FB-02YS(ST)YQY-FL/20.09.10 Page 17
 KERPENWERK GmbH & Co. 2000

Anda mungkin juga menyukai