These are based on pure Epoxy Resin or in combination with other resins such as
phenolic resin , amino resin etc. Epoxy Based coatings are two pack system containing
base and hardener in varying ratio. Thinner is added to adjust viscosity according to
type and method of application. These are well known for their properties like
outstanding chemical resistance , tough and abrasion resistant film , higher DFT
and good adhesion
Epoxy Based coatings are available in form of Primers , Paints , Laquer Or Seaming
Compound. Epoxy Primer can be supplied in limited colours to keep maximum
chemical resistance. Colours available are White , Light Grey , Black , Ivory , Pale
Green , Red and Yellow.
1) Base Coat:
To facilitate the adhesion of the metalized layer and obtain desired finish BASE
COAT is first applied to the substrate prior to vacuum metallization process. This
is available in various viscosities for specific type of application
a) Super Base Coat: suitable for smaller objects with low surface area
( example: bindi items )
b) Medium Base Coat: suitable for smaller objects with low surface area
( example : beads )
c) Jada ( Thicker ) Base Coat : suitable for larger objects with large surface area
(example: idols )
2) Top Coat:
These are based solely on Alkyd Resin or in combination with other resins. Alkyd Based
coatings are one pack. Thinner is added to adjust viscosity according to type and
method of application.
Alkyd Resin Based coatings are available in form of Primers and Paints .