Wenzhou Solid Mechanical Equipment Co., Ltd
SOLID WRY SERIES HOT OIL PUMP
Wenzhou Solid Mechanical Equipment Co., Ltd
4 Durable Bearing
The bearings have a long distance, slow
speed, low bearing load, low running
WRY series hot oil pump is a centrifugal type hot oil circulation pump with max temperature and long service life.
working temperature 350℃ . It has been widely used in heat carrier heating system and Economics
has entered the petroleum, chemical, rubber, plastics, pharmaceutical, textile, printing 5 Because of the design of the lengthening shaft
and dyeing, road construction, food and other industries, mainly used for conveying and the heat dissipation rib plate, there is no
need for cooling water.
weak corrosion and high-temperature fluid without solid particles.
Attention: please relax the bracket screws 6 Flexible
Adopts standard sealing convenient for
before adjusting the concentricity of the pump
Characteristics and motor, and then tighten the screws again.
replacement.
WRY series hot oil pump is the second generation product based on the research
and development of our company after learning and absorption of foreign oil pump. The
basic structure is single-stage single suction cantilever leg supporting, the pump inlet is
axial suction, export center vertically upward, mounted on the base with motor.
WRY series hot oil pump is supported by the ball bearings at the both ends support-
ed structure, front end lubricated by lubricating oil, back end lubricated by grease, in the
middle there is a guide pipe, for observation the sealing condition at any time and the
recycling of conduction oil.
The traditional water cooling structure is changed to natural cooling structure,
making it simpler structure, smaller volume, lower operation cost, better performance
and more reliable usage.
Sealing Type of WRY series hot oil pump:
Adopts packing seal and mechanical seal combination, and the packing seal pack-
ing with high temperature resistance, with good thermal adaptability, and mechanical
seal with high mechanical strength, good wear resistance of hard alloy material, to
ensure the sealing performance under high temperature conditions.
Using the third generation PTFE to do lip type seal, so that the sealing performance
leap-forward, 25 times more reliable than the rubber seal reliability, corrosion resistance
is very strong.
11 HYDRAULIC PUMP / GEAR PUMP / OIL PUMP/ HYDRAULIC PUMP / GEAR PUMP / OIL PUMP/ 12
www.wzsolid.com www.wzsolid.com
SOLID WRY SERIES HOT OIL PUMP
Wenzhou Solid Mechanical Equipment Co., Ltd
SOLID WRY SERIES HOT OIL PUMP
Wenzhou Solid Mechanical Equipment Co., Ltd
13 HYDRAULIC PUMP / GEAR PUMP / OIL PUMP/ HYDRAULIC PUMP / GEAR PUMP / OIL PUMP/ 14
www.wzsolid.com www.wzsolid.com