Nap-Gard® 7-1882 liquido epoxy/urethane, es 100% solidos, recubrimiento de dos components basado en tecnología
epoxy/urethane. Donde el polimero urethane e s p r e -ligado a la resina epoxy, Napgard 7-1882 es” libre de isocyanato”. El
efecto de sinergia de la polymerización epoxy y urethane produces a r ecu b rimien to co n a d h esió n y p ermea b ilidad d el ep ó xico
ju n to con la d u reza y resisten cia a la ab ra sió n del urethane. En pruebas, Napgard 7-1882 ofrece excelente resistencia al
desprendimiento catódico a 80°C.
Revised 03/06/2008
WARRANTY POLICY: Seller certifies that all coatings delivered to Customer in unopened factory filled containers meet all pertinent quality standards presented in its current published literature. Since matters of
surface preparation, application procedures, curing procedures and other local factors that affect coating performance are beyond Seller’s control, Seller assumes no liability for coating failure other than to supply
replacement material for a coating material proven to be defective. Customer will determine suitability of this product for its use and thereby assumes all risks and liabilities in connection therewith. Seller will not
be liable for any injuries, damages or other losses derived, directly or indirectly, from or as a consequence of Customer’s use of the product. SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
RELATING TO ITS PRODUCTS AND THEIR APPLICATION, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSES.
®
Nap-Gard is a registered trademark of E.I. du Pont de Nemours and Company
®
for its brand of Polymer Powder Coatings. Only DuPont makes Nap-Gard .
6
Tensile Modulas: 9.4 ×10 PSI Absorción de agua: 0.1%
(25°C, ASTM D638) (ASTM D570, 24hrs@rt)
14
Water Vapour Permeability: <0.003 Perm-inch Volume Resistivity: 1.0 ×10 ohm-cm
(ASTM D1434) (ASTM D257)
RESISTENCIA QUIMICA
7-dias inmersión a temperature ambiente, no hay cambios observados en los siguientes productos químicos:
10% HNO3 in H2O, 5% H2SO4 in H2 O, 5% CH3 COOH in H2 O, 10% NaCl in H2O, 10% NaOH in H2O, toluene, ethyl acetate, 50% ethanol in H2O,
mineral oil.
GUIAS DE APLICACION
V NOTA
Todos los recubrimientos epóxicos cambiarán de color, perdenán brillo y entizan a la exposición exterior. Sin embargo las propiedades del material no se verán
afectadas.
Revised 03/06/2008
WARRANTY POLICY: Seller certifies that all coatings delivered to Customer in unopened factory filled containers meet all pertinent quality standards presented in its current published literature. Since matters of
surface preparation, application procedures, curing procedures and other local factors that affect coating performance are beyond Seller’s control, Seller assumes no liability for coating failure other than to supply
replacement material for a coating material proven to be defective. Customer will determine suitability of this product for its use and thereby assumes all risks and liabilities in connection therewith. Seller will not
be liable for any injuries, damages or other losses derived, directly or indirectly, from or as a consequence of Customer’s use of the product. SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
RELATING TO ITS PRODUCTS AND THEIR APPLICATION, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSES.
®
Nap-Gard is a registered trademark of E.I. du Pont de Nemours and Company
®
for its brand of Polymer Powder Coatings. Only DuPont makes Nap-Gard .