Introduction
The tN2 Zone Manager 334 is designed to allow 2-wire tekmarNet®2 Thermostats to connect to a tN4 System Control such
as a 420, 421, 422, 423, 274, or 275. The 334 operates up to four zone valves or zone pumps.
Features:
• Only Requires 2 Wires Per Zone • Four Zone Valves or Zone Pumps
• For use with tN2 Thermostats 527, 528, 530 • Time Delay for Thermal Motor Zone Valves
• tN4 System Control Compatible • CSA C US Certified for use in USA and Canada
28 29 30 31 Meets Class B: 32 33 34 35 36 37 38 39 40 41 42 43
Input Power Zone Group Canadian ICES & Zone A1 Zone A2 Zone A3 Zone A4 Zone A5 Zone A6
L N Pmp A N FCC Part 15 C Vlv C Vlv C Vlv C Vlv C Vlv C Vlv
tekmarNet®2 Operation
The 334 uses tekmarNet ®2 (tN2) tN4 C R Pmp tN2 tN2 tN2 tN2 tN2 tN2 tN2 tN2 Rc Y G
communication to connect to tN2 1
tN4 Expansion
2 3 4
Zone 1 Zone 2 Zone 3 Zone 4
5 6 7 8 9 10 11 12
Zn 4 Cool Fan
13 14 15
Cool & Fan Relay Rating:
24 V (ac) 2 A
5 VA Max
compatible thermostats. The 334 24 V (ac) R & C
in turn translates the information to tN4 Bus tN2 Zone Manager 334
tekmarNet®4 (tN4) communication. Power Zone 1
24 V (ac) Fuse: T1.25 A 250 V
On/Off
The tN2 thermostats appear on the tN4 Zone 2 1
Zone Group 2
Pump 3
tN4 communication bus in the same tektra 1029-01 Zone Group Pump Zone 3
4
Cooling Zone 4 1
manner as tN4 thermostats. Fan
Zone Group 2
For product instructions, see brochure Pump Delay 3
4
Important Note: Input Power: 115 V (ac) ±10% 60 Hz, 12 A
Relay Rating: 115 V (ac) 5 A Meets Class B:
All Loads Using Input Power: 11.7 A For product literature: Caution! Disconnect All Canadian ICES Made in
The 334 is NOT compatible with previous Zone Power: 115 V (ac) ±10% 60 Hz, 12 A www.tekmarcontrols.com Power before Opening FCC Part 15 Canada
H7017A
generation tN2 products such as the 115 V (ac) L & N 16 17 18 19 20 21 22 23 24 25 26 27 28
Remote Display Module 040 or the Input Power
L N
Zn Grp
Pump
Supply wires
75°C minimum
Zone Power
R/L
Zone 1 Zone 2 Zone 3 Zone 4
C / N Vlv/Pmp C / N Vlv/Pmp C / N Vlv/Pmp C / N Vlv/Pmp C / N
Start / Stop Module 039.
1
tN4 Expansion
2 3 4
Zone 1 Zone 2 Zone 3 Zone 4
5 6 7 8 9 10 11 12
Rc Y G
Zn 4 Cool Fan
13 14 15
Cool & Fan Relay Rating:
24 V (ac) 2 A
1 Zone Group Pump Delay
5 VA Max Zone Group 2
tN2 Zone Manager 334
24 V (ac) Fuse: T1.25 A 250 V
Pump 3 Each zone has a corresponding Zone Group Pump Delay
Power Zone 1 On/Off
4
tektra 1029-01 Zone Group Pump
tN4 Zone 2
Zone 3 Pump
1
Zone Group 2
3
4
1 DIP switch.
Cooling
Fan
Zone 4 1
Zone Group 2 Zone Group 2
Note: The Zone Group Pump Delay only operates if the
For product instructions, see brochure Pump Delay 3
Input Power: 115 V (ac) ±10% 60 Hz, 12 A
Relay Rating: 115 V (ac) 5 A
4
Meets Class B:
Pump Delay 3
All Loads Using Input Power: 11.7 A For product literature: Caution! Disconnect All Canadian ICES Made in
4
Zone Power: 115 V (ac) ±10% 60 Hz, 12 A
16 17 18
www.tekmarcontrols.com
19 20 21 22
Power before Opening
23 24 25 26
FCC Part 15
27
H7017A
28
Canada
Zone Group Pump DIP switch is set to On.
Input Power Zn Grp Supply wires Zone Power Zone 1 Zone 2 Zone 3 Zone 4
L N Pump 75°C minimum R/L C / N Vlv/Pmp C / N Vlv/Pmp C / N Vlv/Pmp C / N Vlv/Pmp C / N