ENGINEERING
1. Title page
2. Declaration
3. Abstract
4. Table of contents
1
11. Chapter One: Introduction, Background, Problem Statement, Justification, Hy-
14. Budget
16. References
SAMPLE!!
2
DEDAN KIMATHI UNIVERSITY OF TECHNOLOGY
ENGINEERING
Simulink
Engineering in partial fulfillment of the requirements for the award of the degree of
Information Engineering.
July 2014
3
Declaration
This project proposal is my original work, except where due acknowledgement is made
in the text, and to the best of my knowledge has not been previously submitted to
Dedan Kimathi University of Technology or any other institution for the award of a
degree or diploma.
Reg No : xxxxxxxxxxxx
TThis research proposal has been submitted to the Department of Electrical and
Designation
Designation
4
Following pages to include:
• List of Figures
• List of Tables
• Abbreviations
• Abstract
• Table of Contents
5
1 Chapter One: Introduction
1.1 Background
2 Chapter Two
LITERATURE REVIEW
To clearly indicate that a thorough survey of the current literature relevant to the
3 Chapter Three
METHODOLOGY
6
4 Chapter Four
4.2 Facilities
To list the necessary facilities to execute the project. This might include:
• Computer facilities
• Others.
Where specialized equipment (or facility) is required and is not in the University, a
candidate should show evidence that he/she has access to such equipment.
4.3 Budget
To break down the stages of the work over the period of study (i.e Semester one and
semester two).
References
7
• To give a list of all references cited.
power system to remain in synchronism after being subjected to a disturbance [1, 2, 3].
i. Transient Stability.
This is the ability of the power system to maintain synchronism after a large distur-
bance e.g. loss of a generator or major load, system fault [2]. In transient stability
analysis the action of governors and AVRs is not considered and the time frame of
20 seconds for very large systems with dominant inter-area swings[1, 4].
This is the ability of the power system to maintain synchronism when the system
is subjected to slow gradual disturbances such as gradual power changes [5, 3]. It
is basically concerned with the determination of the upper limit of the machine
loading before losing synchronism provided the loading is increasing gradually [6].
This is the ability of the power system to maintain synchronism after a small
disturbance lasting for a long time after the action of with the inclusion of voltage
8
References
[1] Prabha Kundur and IEEE/CIGRE Joint Task Force on Stability Terms and Defi-
ACTIONS ON POWER SYSTEMS, vol. 19, pp. 1387 – 1401, August 2004.
1987.
[5] B.R Gupta, Power System Analysis and Design. S. Chand & Company LTD, 2009.
9
Prepared by: Roy S.
samroyoin@gmail.com
+254722802207
10