DANGER
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply will result in death or serious injury.
D0076A
931001946 1
931001944 2
931001936 3
931001928 4
931001933 5
931002047 6
931001929 7
931001940 8
931002114 9
931001943 10
11. Attach engine oil pan drain hose support clamp (9) .
931002050 11
931001926 12
931001925 13
14. Connect the two remote oil filter lines (12) and (13)
as previously labeled.
931001923 14
931001922 15
931001919 16
931001917 17
931002113 18
931001911 19
931001910 20
931001909 21
931001908 22
931001903 23
24. Install the three mounting bolts (21) that secure air
cleaner housing and bracket to frame. Tighten the
mounting bolts (21) to a torque of 27 - 31 N·m (
20 - 23 lb ft ) .
931001900 24
25. Install the fixed hood and secure with hardware (22) .
931001899 25
931001898 26
931001897 27
28. Install the four mounting bolts from the muffler brack-
ets (25) . Tighten the mounting bolts to a torque of
27 - 31 N·m ( 20 - 23 lb ft ) .
931001895 28
931001896 29
30. Attach lifting straps through the engine hood and hoist
in mounting location.
931001894 30
31. Install left and right hand side hood mounting hard-
ware (27) .
931001887 31
32. Connect left and right hand side hood struts (28) .
931001887 32
931001893 33
931001890 34
931001889 35
Next operation:
Install the oil cooler. See Oil cooler/Heat exchanger - Install .
Next operation:
Install the radiator. See Radiator - Install 2.
Next operation:
Install rear access door. See . Engine inspection door - Install .
Next operation:
Fill the hydraulic system. See Oil reservoir - Filling .
Next operation:
Fill the coolant system. See Radiator - Filling .
931001884 1
931001882 2
931001881 3
931001877 4
931001879 5
931001872 6
931001874 7
931001657 8
931001678 1
2. Install door hardware, bolt (1) and nut (2) to the upper
and lower mounts.
931001676 2
931001673 3
4. Mount fuel filter base to door using bolts (B) and nuts
(A) .
931001671 4
5. Support the fuel lines (5) to the back door using wire
ties (4) .
931001670 5