001 Visual & Mechanical Checks of • Improper connections • Verify nameplate/ identifications in Low level risk
equipment; • Improper Grounding accordance with the approved
(Dust, Moisture, equipment • Cut due to sharp edges drawings and specifications.
Damage, etc.) • Missing Name Plates • Inspect for physical damages /
• Inadequate existence of defects and mechanical condition.
Primary & Secondary wiring • Verify correct connection with
• Personal Injury. system requirements.
• Property Loss. • Verify that adequate clearances
• Verify tightness of accessible bolted
electrical connections by calibrated
torque-wrench method.
• Verify single point grounding of
each core done properly.
• Perform safety Tool Box Talks.
• • Ensure that all required grounding
and shorting connection provided.
002 Mobilization of equipment • Poor housekeeping. • Store tools and equipment safely Low level risk
• Improper handling and maintain good housekeeping
techniques. standards.
• Improper planning. • Use safe handling techniques for
• Slips Trips and Falls the transportation of tools and
• Manual Handling equipment.