# TPEB-QHSE-F-01
ISSUE# 01
IN-PROCESS ASSEMBLY INSPECTION CHECK LIST
ISSUE DATE 05-06-2017
ITE
M ACCEPTANCE CRITERIA Reference PASS FAIL N/A REMARKS
NO.
A: Assembly of ceiling
Interior ceiling shall be constructed with minimum 89/63 x 41 x 1 mm studs and TPEB- SPR-
A1 runners, spaced 610mm on center. 10
The surfaces of gypsum board shall be true and free from imperfections that would TPEB- SPR-
A2 render it unfit for use with or without decoration. 10
Installed products shall be protected from weather, condensation, direct sunlight, TPEB- SPR-
A3 construction, and other causes during the remainder of construction period. 10
Panels that are wet, damage by mold and moisture shall be removed. TPEB- SPR-
A4
10
A5 The gypsum board of the ceiling should be minimum 16mm thick fire resistant. TPEB-SPR-10
REMARKS:
ISSUE# 01
IN-PROCESS ASSEMBLY INSPECTION CHECK LIST
ISSUE DATE 05-06-2017