Anda di halaman 1dari 6

T-mobile LG V10 MM 6.

0 Flash (root) guide (STEP#3)


By jun19inf

These are the steps I followed to successfully flash my LG V10 (T-mobile) and gain root on the stock MM 6.0. As a
disclaimer, I take no responsibility in what you do to your phone. The steps below are what worked for me and I
am sharing them to hopefully assist someone else in flashing their LG V10.

This guide assumes the following:


 You understand that all data on your phone will be deleted
 You understand that your warranty is gone
 You have completed the “STEP#1 & STEP#2” guides before starting this one
(Failure to do so will result in your phone going into boot-loop or worse)
Step(s) Instructions
Download the .TOT T-mobile file (LGH901AT-00-V20j-310-260-JUL-12-2016-ARB02+0ROOTTWRP.zip)
1 from the following link:
https://drive.google.com/file/d/0B3R77elw9JjNQkpaUWkwNGstU1U/view?pref=2&pli=1

Un-zip the (LGH901AT-00-V20j-310-260-JUL-12-2016-ARB02+0ROOTTWRP.zip). You will see the


following:
2

Download the H90120j_00_0712.kdz (stock MM 6.0 T-mobile) file from the following link:
3
https://drive.google.com/file/d/0B_JBeEUxpxgjenh5MlJsYWN2c0U/view?pref=2&pli=1

Restart your LG V10 and hold the VOLUME UP button until it goes into “Download mode”

4
T-mobile LG V10 MM 6.0 Flash (root) guide (STEP#3)
By jun19inf

Connect the phone to your computer and run the LGUP tool. It will detect the LG V10 phone

6 Under the “Process” selection options, make sure the UPGRADE option is selected

Click on the white space on the “File path” column next to the BIN File so the button with 3 little dots
appears
7

Click on the button with the 3 little dots to open an "Open file dialog box". Select the .kdz file you
downloaded

8
T-mobile LG V10 MM 6.0 Flash (root) guide (STEP#3)
By jun19inf

The file name will now appear on the “File Path”

Switch the UPGRADE option under the "Process" options to REFURBISH

10

Press the “Start” button to start the flashing process. When the phone is done, it will restart itself.

11 Follow the steps on “STEP#2” guide to enable the developer options which is required to enable:
 Enable OEM unlock
 USB debugging

12 Copy the SuperSU zip file you downloaded previously on STEP#1 guide to your SD-card in your phone

13 Restart your LG V10 and hold the VOLUME UP button until it goes into “Download mode”

Open the LGUP Tool and do the following:


1. Under the “Process” selection options, make sure the UPGRADE option is selected
2. Click on the white space on the “File path” column next to the BIN File so the button with 3 little
dots appears
3. Click on the button with the 3 little dots to open an "Open file dialog box". Select the .TOT file
you downloaded (LGH901AT-01-V20j-310-260-JUL-12-2016-ARB02+0ROOTTWRP.TOT)
4. Press the “Start” button to start the flashing process. When the phone is done, it will restart
itself.
14
T-mobile LG V10 MM 6.0 Flash (root) guide (STEP#3)
By jun19inf

Boot into TWRP. There are two ways to do this (Software or Manual):

Software / app
 Quickboot or Flashify -> Select the “Recovery” option, restarts your phone and boots into TWRP
15
 Skip Steps# 16-20
Manual
 Factory data reset
o Follow Steps 16-20
16 Turn your phone off

Hold down the power button and the Volume down button and wait until your see the LG logo then do
the following while still holding down the VOLUME DOWN button:
17
1. Let go of the power button for 1 sec
2. Press and hold the power button again

Continue to hold both buttons until you see the factory data reset screen

18
T-mobile LG V10 MM 6.0 Flash (root) guide (STEP#3)
By jun19inf

Use the volume buttons as UP / DOWN directional arrows and the power button as the “ENTER” button.
Select the button “YES” and press the power button. You will have to do this twice.

19

You will now exit the “Factory data reset” screen and boot into TWRP

20

To get “root” on your current stock MM 6.0 you must flash SuperSU:
1. Go to the Install section
21 2. Search for and select the SuperSu zip file
3. Flash the SuperSu zip file
4. Restart your phone
T-mobile LG V10 MM 6.0 Flash (root) guide (STEP#3)
By jun19inf

You now have a rooted stock MM 6.0 (T-mobile)


LG V10!!

I would like to thank the following people:


 Tungkick
o For his support
o Root method
o Instructions on flashing and recovering from boot-loop
Anyone else I forgot to mention and or involved in allowing the rest of us to get root on
our beloved LG V10 phones again. The android community is awesome

Anda mungkin juga menyukai