SRI VASAVI
INSTITUTE OF ENGINEERING & TECHNOLOGY
NANDAMURU. PEDANA. 521 369.
1. (a) A trolley car of total weight 3000N runs on rails of 1.5m gauge and
travels a curve 30m radius at 8.7 m/s. The rails are being at the same
level. The car has four wheels of 72cm diameter and each of the two
axles is driven by a motor running in an opposite direction to the wheels
at a speed of 5 times the speed of rotation of vehicle. Each axle with
gear and wheels has a Moment of inertia 147kg m2. Each motor with the
shaft and gear pinion has a Moment of inertia 10.5kg m2 and has centre
of gravity 90 cm above the rail level. Allowing the centrifugal and
gyroscopic action, determine the vertical force exerted by each wheel
on the rails.
(b) Define the terms with sketch of a naval ship: i. Bow ii. Stern
iii. Starboard iv. Port v. Steering vi. Pitching and vii. Rolling.
2. (a) Derive the expression for the efficiency of the inclined plane, when
the body is moving up the plane.
(b) A screw jack has a square thread of mean diameter 6 cm and pitch
0.8 cm. the coefficient of friction at the screw thread is 0.09. A load of
3kN is to be lifted through 12 cm. Determine the torque required and the
work done in lifting the load through 12 cm. Find the efficiency of the
jack also.
***********