乘 客 电 梯 2:1
Passenger elevator 2:1
安川双菱电梯有限公司
SL ELEVATOR CO.,LTD.
CONTENTS
目 录
overall view
总装图……………………………………………………………………………………………………………………………………………………………..……1
machine room
1. 机房布置…………………………………………………………………………………………………………………………………………………..………2
car system
2. 轿厢系统…………………………………………………………………………………………………………………………………………………..………3
car fence
2.1 轿厢护栏……………………………………………………………………………………………………………………………………………..………….5
car bottom
2.6.1 轿底底部……………………………………………………………………………………………………………………………………………….……..11
limit structure
2.9 极限结构………………………………………………………………………………………………………………………………………………….………14
shaft system
3.井道系统…………………………………………………………………………………………………………………………………………………….……….16
governor system
3.1 限速器系统………………………………………………………………………………………………………………………………………………………17
shaft lighting
3.3 井道照明………………………………………………………………………………………………………………………………………………………….19
counterweight group
3.4 对重架组合………………………………………………………………………………………………………………………………………………………20
counterweight fence
3.5 对重护栏………………………………………………………………………………………………………………………………………………………….21
traveling cable
3.6 随行电缆………………………………………………………………………………………………………………………………………………………….22
shaft wiring
3.6.井道电线布置………………………………………………………………………………………………………………………………………….………23
shaft sensor
4.井道信息…………………………………………………………………………………………………………………………………………………………….25
总装图
overall view
1
第 1 页 共25 页
1、机房 machine room
4
3
第 2 页 共 25 页
2、轿厢系统 car system
第3 页 共 25 页
2、轿厢系统 car system
10
11
7、导靴、油杯、井道信息
感应开关 guide shoe, oil cup, shaft sensor switch
8、安全钳提拉组件 lifting components of safety gear
9、极限结构 limit structure
10、门机组件 door operator components
11、轿厢护脚板 car toe kick
第4 页 共 25页
2.1 轿顶护栏 car top fence
上梁 top beam
轿顶护栏 car top fence
A
1:3 B
1:3
第5 页 共 25 页
2.2轿架、轿底托架 car frame, car bottom support
A
1:5 上梁 top beam
立梁
vertical beam
轿底托架
car bottom support
B
1:5 E型填充垫片
E type filling gasket
下梁
bottom beam
B
E型填
充垫片
第6 页 共 25 页
2.3 轿顶组件 car top components
安全钳提拉杆
safety gear pulling bar
立梁
轴流风机 vertical beam
ventilator
LED灯护罩 极限开关
LED light cover limit switch
轿顶
car top
A
立梁卡板
vertical beam card plate
轿壁 B
car wall
门楣
door lintel
A B
1:3 1:3
第 78 页 共 25 页
2.4 轿顶检修箱 car top box
轿顶护栏
car top fence
轿顶检修箱
检修箱连接角铁 car top box
connection angle iron for car
A top box
1:3
䓃ᷛ
ネ㾿㼅㑍ㅴㅨ㳛䈌ㅯⰆ⿅㎙➓
䓑⪇䁂䋒㬫⼰㸜䐤㞅䔋➓䓑!
remark: choose a suitable position for
connecting car top box angle iron and car
top fence
检修箱连接角铁
connection angle iron for car
top box
第8 页 共 25 页
2.5 轿壁布置 car wall arrangement
B
A
后轿壁
rear wall
侧轿壁
side wall
门楣
door lintel
右前壁
front wall(R)
擦纵壁
操纵箱
COP
䓃ᷛ
㵝䐱$㸋ㅯ㼂㈜㌎ᷜ%㸋ㅯ㼂㈜㪏
remark:
A=car net width,
B=car net depth
第9 页 共 25 页
2.6 轿底组件 car bottom components
立梁
轿厢护脚板 vertical beam
car toe kick
下梁
A 轿底
car bottom
bottom beam
轿底托架
轿壁 car bottom bracket
car wall
轿门地坎
car door sill
轿底 超载装置
car bottom overload device
平衡块 护脚板支架
B toe kick bracket
balance block 轿底托架
car bottom bracket 下梁
bottom beam
B
A 1:5
1:6
轿底减震垫
car bottom shock absorber
斜拉杆座
oblique pulling bar seat
第 10 页 共 25 页
2.6.1轿底底部 car bottom
轿底减震垫
car bottom shock absorber
平衡块
balance block
overload device
超载装置
下梁
bottom beam
随行电缆固定架
fixing bracket for traveling
cable
轿底托架
car bottom bracket
A
1:2
安全钳动作开关
safety gear switch
超载开关
overload switch 下梁
bottom beam
remark:
1, arrange the quantity and position of balance block according to the car balance on job site.
2, the distance between overload switch and magnet is 25mm-30mm
注:
1、平衡块按现场轿厢实际平衡度决定数量和放置位置!
2、超载开关与磁铁距离在25mm~30mm!
第 11 页 共 25 页
2.7导靴、油杯、井道信息感应开关
guide shoe, oil cup, shaft sensor switch B
油杯
oil cup
上减速感应开关 上限位感应开关
top decelerate switch top limit sensor 下限位感应开关
下线位感应开关
bottom limit sensor
门区感应开关
door area sensor
轿厢导靴
fixing bracket car guide shoe
for switch and
oil cup
开关及油杯固定架
下减速感应开关
bottom decelerate
sensor
remark:
take off the original oil cup bracket of the guide shoe, and put on the
switch and oil cup bracket made by our company.
注:
将导靴原有的油杯架卸下,换上我公司特制的开关及油杯固定架!
第 12 页 共 25 页
2.8安全钳提拉组件
safety gear pulling components
钢丝绳固定件
steel rope fixing component
拉杆稳定件
fixing
component for
pulling bar
提拉圆杆
round pulling bar
安全钳动作开关
safety gear switch
圆管
round tube
安全钳
safety gear B
A 1:3
A
1:3
H1
极限开关
B limit switch
c
B
1:3
立梁
vertical beam
导轨支架
guide rail bracket
H2
极限开关滚轮
limit switch roller
C向
撞弓
final limit cam
注:
当轿厢在顶层平层时,H1=100mm
当轿厢在底层平层时,H2=100mm
remark:
when the car is on the leveling position of top floor, H1=100MM
when the car is on the leveling position of bottom floor, H2=100MM 第 页 14 共 25 页
2.10 轿门系统 car door system
轿顶组件
car top
components
门机
door operator
光幕电线固定链条
fixing chain for light
A curtain wire
bolt 1:3
关门保护装置(光幕)
方底螺栓 door closing protection
device(light curtain)
轿门组件
car door components
轿门地坎
car door sill
B
1:1
门滑块
door slider
第 15 页 共 25 页
3、井道系统 shaft system
4
7
1, governor system
2, guide rail, guide rail
bracket group
3, shaft lighting
4, counterweight group
5, counterweight fence
6, fixing for traveling cable
7, landing door system 8
8, pit staircase
1、限速器系统
2、导轨、导轨支架组合
3、井道照明
4、对重架组合
5、对重护栏
6、随行电缆固定
7、层门系统
8、底坑爬梯
第 页 16 共 25 页
3.1限速器系统 governor system
A 限速器
1:5 钢丝绳锁 governor
steel rope lock
钢丝绳
steel rope
涨紧装置
tension device
涨紧装置动作开关
tension device swicth
第 17 页 共 25 页
A 3.2导轨、导轨支架组合 guide rail, guide bracket group
1:6
轿厢导轨
car guide rail
对重导轨
counterweight
guide rail
A
B 轿厢导轨支架
1:6 car guide rail
bracket
对重导轨支架
counterweight
guide rail bracket
car guide
rail distance
轿 轿厢导轨接导板
厢 car guide rail
导
轨 access guide plate
距
C
1:6
对
重
D C
B 导
轨
距
counterweight
guide rail
distance
对重导轨接导板
counterweight
guide rail
access guide plate
D
1:6
H
remark:
the distance between pit and the first bracket H1<=500MM,
H1
500mm
照明灯组合
light group 井道墙体
shaft wall
≤7000
A
1:4
A
≤7000
500mm
第 19 页 共 25 页
3.4对重架组合counterweight group
油杯
oil cup
A
1:3 A
对重导靴
counterweight
guide shoe
对重绳轮
counterweight
sheave
对重架
counterweight
bracket
对重块压板
B
counterweight
keep plate
对 重块
counterweight
B
1:3 对重立梁槽钢
counterweight
vertical beam
channel steel
压导板
press guide plate
对重缓冲座
counterweight
buffer seat
缓冲器
H
buffer
注:
1、对导靴面与导轨面距离为1-1.5mm。
2、对重缓冲座与缓冲器距离H=100-350mm。
remark:
1, the distance between counterweight guide shoe and the guide rail is 1-1.5mm.
2, the distance between counterweight buffer seat and buffer H=100-350mm.
第 20 页 共 25 页
3.5对重护栏 counterweight fence
对重导轨
counterweight
guide rail
护栏固定架
fence fixing
B bracket
对重护栏
counterweight
fence
底坑底部
300mm
pit bottom
A
1:3
对重导轨 B
1:3
counterweight
guide rail
压到板
guide plate
注:
d数值根据对重块宽度确定
remark:
d value confirmed by the width of
counterweight
第 21 页 共 25 页
3.6随行电缆 traveling cable
通往控制柜
to control cabinet
A
夹线架1
1:4 fixing bracket1
A
随行电缆
traveling cable
通往轿顶检修箱
to car top box
B 夹线架2
1:4 fixing bracket2
wire hanging
bracket for car
轿厢挂线架
注:
1、夹线架1 安装在井道顶下来200mm左右处!
2、夹线架2 安装在井道高度的1/2处!
remark:
1, fixing bracket 1, install 200mm below the shaft top
2, fixing bracket 2, install in the middle of the shaft
(1/2 height of the shaft height).
第 22 页 共 25 页
3.6.1井道电线布置shaft wiring
A
A向
花兰螺丝
turnbuckle screw
4mm钢丝绳
钢丝绳锁 4mm steel rope
steel rope lock
shaft wire
井道电线
1根控制柜道底坑。
1 from control
cabinet to pit
1根控制柜到每层门锁
1根控制柜到每层召唤盒
1 from control cabinet to
1 from control cabinet to
door lock(each floor)
HOP(each floor)
扎线带
cable tie
B向
4mm钢丝绳
4mm steel rope
钢丝绳锁
steel rope lock B
膨胀螺栓
expansion bolt
第 23页 共 25 页
3.7层门系统、底坑爬梯landing door system, pit staircase
井道墙壁
shaft wall
门套横档与层门装置连接件
jamb crosspiece and upper
sill connector
层门门板
小门套 landing door
层门 narrow jamb
landing door
A
B向 层门地坎
landing door sill
landing door
层门
小门套
narrow jamb
C
层门地坎
landing door
sill
层门护脚板
护脚板
landing door
toe kick toe kick
地坎支架
sill bracket B
底坑爬梯
pit staircase
C
1:3
门滑块
door slider
第 24 页 共 25 页
B向导轨 B guide rail
4、井道信息安装
shaft sensor installation
A A向导轨
A guide rail
50
top decelerate sensor switch
1200
下限位感应开关
4. when installation, drive bottom decelerate sensor
switch 上减速磁铁
the elevator to the top decelerate
leveling position(when magnet
the car sill and door sill remark:
are parallel), start to put 1. 2pcs of top limit and
the magnet, target the 2pcs of top decelerate
door area sensor switch magnet, N pole on
to the center of magnet, the top and S pole at the
place the top limit bottom
magnet 50mm above the
2. 2pcs of bottom limit
top floor door area
and 2pcs of bottom
magnet center. place the
decelerate magnet, S
top decelerate magnet
pole on the top and N
1200mm below the top
pole at the bottom
floor door area magnet
center. 3. door area magnet,
4pcs for each floor
下减速磁铁
bottom decelerate magnet
1200
50
下限位磁铁
bottom limit
magnet
注:1、上限位和上减速磁铁只要2块,
上面N极下面s极。
2、下限位和下减速磁铁只要2块,
上面S极下面N极。
3、门区磁铁,每层一条(4块)。
4、安装时先把电梯开到轿门地坎与层门地坎
平行,开始放磁条,门区感应开关对准磁条中
心。顶层门区磁条中心向上50MM放上限位磁
铁,顶层门区磁条中心向下1200MM处安放上
减速磁铁。底层门区磁条中心向下50MM放下
限位磁铁,底层门区磁条中心向上1200MM处
安放下减速磁铁。
第25 页 共 25 页