User Manual
KFD4952XD
Please read this manual first!
Dear Customer,
We hope that your product, which has been produced in modern plants and checked under the most
meticulous quality control procedures, will provide you with effective service.
For this, we recommend you to carefully read the entire manual of your product before using it and keep
it at hand for future references.
The user manual will help you use the product in a fast and safe way.
• Read the manual before installing and operating your product.
• Follow the instructions, especially those for safety.
• Keep the manual in an easily accessible place as you may need it later.
• Besides, read also the other documents provided with your product.
Please note that this manual may be valid for other models as well.
A
Warning against dangerous
conditions for life and property.
7 Troubleshooting 31
9 Guarantee Details 35
*1
9
*8 *2
7
*3
*6
*5
C
*Optional: Figures in this user guide are schematic and may not exactly match your product. If your
product does not comprise the relevant parts, the information pertains to other models.
BROWN
FUSE
6mm.
OR
CARTRIDGE FUSE
N
of electrical and electronic equipment.
RED
FITTED WITH
22mm.
BLUE
OR
Please consult your local
12mm.
6mm.
BLACK
A
narrow for the product to pass, remove
the door and turn the product sideways; if
this does not work, contact the authorized
service.
A
directly to the water mains, depending on the
WARNING: Do not use extension model. To establish the connection, the water hose
or multi sockets in power connection. must first be connected to the product.
Check to see the following parts are supplied with
B
WARNING: Damaged power your product’s model:
cable must be replaced by Authorized
Service.
1 2
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
3 4 *5
A
WARNING: Unplug the product and 5. Water filter (1 piece *Optional): Used to connect
the water pump (if available) during the mains water to the product. Water filter is not
connection. required if carboy connection is available.
3.6. Connecting water
hose to the product
To connect the water hose to the product, follow
the instructions below.
1. Remove the connector on the hose nozzle adaptor
in the back of the product and run the hose
through the connector.
A
WARNING:After turning the tap on,
make sure there is no water leak on 4. Once the connection is established, plug in and
either end of the water hose. In case of start the water pump.
C
leakage, turn the valve off and tighten all
connections using a pipe wrench or pliers. Please wait 2-3 minutes after starting the
pump to achieve the desired efficiency.
3.8. For products using
C
water carboy
See also the pump’s user guide for water
(Optional) connection.
To use a carboy for the product’s water
C
connection, the water pump recommended by the When using carboy, water filter is not
authorized service must be used. required.
1. Connect one end of the water hose provided with
the pump to the product (see 3. 6) and follow the 3.9 Water filter
instructions below. (Optional)
The product may have internal or external filter,
depending on the model. To attach the water filter,
follow the instructions below.
4
6
3. Attach the filter in upright position on the filter
connecting apparatus, as indicated on the label.
1 2 3 ( 6 ).
a a
C
The water filter will clear certain foreign
particles in the water. It will not clear the
microorganisms in the water.
A
Connecting the product to electronic
energy-saving systems is harmful, as it
may damage the product.
C
defrosting frozen foods in the cooler A sound will be heard when the
compartment will ensure energy saving and compressor is engaged. It is normal to
preserve food quality. hear sound even when the compressor is
• Make sure the foods are not in contact with inactive, due to the compressed liquids and
the cooler compartment temperature sensor gasses in the cooling system.
C
described below. It is normal for the front edges of the
• Food must be stored in drawers inside the refrigerator to be warm. These areas are
cooler compartment in order to provide energy designed to warm up in order to prevent
saving and preserve the food in a better condensation.
C
ambient. In some models, indicator panel is dimmed
• Prevent direct contact between the automatically 5 minutes after the door is
temperature sensor in the freezer compartment closed. It will be activated again when the
and the food packages. Energy consumption door is opened or any key is pressed.
may increase in case of a contact with the
sensor.
8 1 2 3
7 6 5 4
C
*Optional: Figures in this user guide are schematic and may not exactly match your product. If your
product does not comprise the relevant parts, the information pertains to other models.
1 23
11 4
10 9 8 7.2 7.1 6 5
1- Economic use
1 2
2- High temperature /(*) 3 alert4
fault
3. Energy saving function (display off)
4- Rapid cooling
5- Vacation function
6- Cooler compartment temperature setting
7- Energy saving (display off)/Alarm off warning
8- Keypad lock
9- Eco-fuzzy
10- Freezer compartment temperature setting
2 11- Rapid freezing
1
C
*Optional: Figures in this user guide are schematic and may not exactly match your product. If your
product does not comprise the relevant parts, the information pertains to other models.
12 6
11
10.2 10.1 9 8 7
C
*Optional: Figures in this user guide are schematic and may not exactly match your product. If your
product does not comprise the relevant parts, the information pertains to other models.
Freezer Cooler
Compartment compartment Descriptions
Setting Setting
-18°C 4°C This is the default, recommended setting.
-20,-22 or These settings are recommended for ambient temperatures
4°C
-24°C exceeding 30°C.
Use this to freeze food items in a short time. The product will reset
Rapid Freeze 4°C
to previous settings when the process is completed.
Use these settings if you believe the cooler compartment is not cold
-18°C or colder 2°C
enough due to ambient temperature or frequently opening the door.
5.14. Recommendations
for storing frozen foods
The compartment must be set to at least -18°C.
1. Place the food items in the freezer as quickly as
possible to avoid defrosting.
2. Before freezing, check the “Expiry Date” on the
package to make sure it is not expired.
3. Make sure the food’s packaging is not damaged.
B WARNING: Disconnect the power before odorous materials. However, keeping the food in
cleaning the refrigerator. inappropriate sections and improper cleaning of
internal surfaces may lead to malodour.
• Do not use sharp and abrasive tools, soap, To avoid this, clean the inside with carbonated
house cleaning materials, detergents, gas, water every 15 days.
gasoline, varnish and similar substances for • Keep the foods in sealed holders.
cleaning. Microorganisms may spread out of unsealed
• Melt a teaspoonful of carbonate in the water. food items and cause malodour.
Moisten a piece of cloth in the water and wring • Do not keep expired and spoilt foods in the
out. Wipe the device with this cloth and dry off refrigerator.
thoroughly.
• Take care to keep water away from the lamp’s 6.2. Protecting plastic surfaces
cover and other electrical parts.
Oil spilled on plastic surfaces may damage the
• Clean the door using a wet cloth. Remove all
items inside to detach the door and chassis surface and must be cleaned immediately with
shelves. Lift the door shelves up to detach. warm water.
Clean and dry the shelves, then attach back in
place by sliding from above.
• Do not use chloric water or cleaning products
on the exterior surface and chrome-coated
parts of the product. Chlorine will cause rust on
such metallic surfaces.
• Do not use sharp, abrasive tools, soap,
household cleaning agents, detergents,
kerosene, fuel oil, varnish etc. to prevent
removal and deformation of the prints on the
plastic part. Use lukewarm water and a soft
cloth for cleaning and then wipe it dry.
A WARNING: If the problem persists after following the instructions in this section, contact your
vendor or an Authorised Service. Do not try to repair the product.
You should also complete the details below; it will help us assist you when requesting service.
(The model number is printed on the Instruction Booklet and the serial number is printed on the
Rating Label affixed to the appliance)
For service under guarantee simply telephone the appropriate number below
Republic of Ireland
Before requesting service please check the trouble-shooting guide in the Operating Instructions
as a charge may be levied where no fault is found even though your product may still be under
guarantee.
Your new BLOMBERG product is guaranteed against the cost of breakdown repairs for three years from
the date of the original purchase.
What is covered?
• Repairs necessary as a result of faulty materials, defective components or manufacturing defect.
• The cost of functional replacement parts, but excluding consumable items.
• The labour costs of a BLOMBERG approved repairer to carry out the repair.
Important notes.
• Your BLOMBERG product is designed and built for domestic household use only.
• The guarantee will be void if the product is installed or used in commercial or non-residential domestic house-
hold premises.
• The product must be correctly installed, located and operated in accordance with the instructions contained in
the User Instructions Booklet provided.
• Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing
Machines, Dishwashers and Electric Cookers
• Gas Cookers must only be installed by a Gas Safe (or BORD GAIS) registered Gas Installer.
• The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland.
• The guarantee is applicable only to new products and is not transferable if the product is resold.
•BLOMBERG disclaims any liability for incidental or consequential damages.
The guarantee does not in anyway diminish your statutory or legal rights.
57 6043 0000/AF