0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
39 tayangan2 halaman
The document announces an international conference on materials science and engineering to be held on June 11-12, 2019 at NIT Jalandhar. Papers are invited on topics related to composite materials, multiscale modeling, metals/ceramics/polymers, and mechanical properties. Authors must submit an abstract by March 11 and full paper by May 11. Selected papers will be published in the conference proceedings and considered for an ESCI journal. Registration fees range from INR 3,000-10,000 with different rates for students, academia, industry, and foreigners.
The document announces an international conference on materials science and engineering to be held on June 11-12, 2019 at NIT Jalandhar. Papers are invited on topics related to composite materials, multiscale modeling, metals/ceramics/polymers, and mechanical properties. Authors must submit an abstract by March 11 and full paper by May 11. Selected papers will be published in the conference proceedings and considered for an ESCI journal. Registration fees range from INR 3,000-10,000 with different rates for students, academia, industry, and foreigners.
The document announces an international conference on materials science and engineering to be held on June 11-12, 2019 at NIT Jalandhar. Papers are invited on topics related to composite materials, multiscale modeling, metals/ceramics/polymers, and mechanical properties. Authors must submit an abstract by March 11 and full paper by May 11. Selected papers will be published in the conference proceedings and considered for an ESCI journal. Registration fees range from INR 3,000-10,000 with different rates for students, academia, industry, and foreigners.
ICMSE-2019 Conference Papers must report original academic or industrial research details.
The abstract shall be reviewed by a peer
in any of the following topics not limited to but relevant to committee. Selected manuscripts will be accepted for either Department of Mechanical Engineering under the aegis of NITJ is organizing an International Conference on Materials the conference. oral or poster presentation. After the acceptance of the Science and Engineering (ICMSE) from June 11 to 12, abstract, the authors are required to submit the full paper Track – 01: Track – 02: 2019 in collaboration with Govt. Women Engineering again through the same link of easy chair. All the templates Composite Materials Multiscale Modeling of College, Ajmer. The present conference aims at providing a • Polymer composites Materials and detailed guidelines are available at website leading forum for sharing original research contributions • Ceramic & Metal Matrix • FEM Modeling of (http://nitj.ac.in/icmse2019). All the presented papers will be and practical developments in the field of Materials Science Composites Materials published as conference proceedings. Selected Papers of and Engineering so as to contribute its share for • Green Composites • Density Functional st the 1 ICMSE conference will be considered for publication technological advancements. Globalization provides all • Fibrous & Particulate Theory Analysis around development and this development is impossible in ESCI journal (Nanoscience and Technology: An Composites • Monte-Carlo Technique without technological contributions. Hence, the present International Journal) after the conference. The paper sent • Hybrid composites • Meso-scale Modeling conference aims at providing a leading forum for sharing • Self-healing Composites • Molecular Dynamics to the journal should contain no more than 30% data from original research contributions and practical developments • Micro & Nano Modeling of Materials the paper presented at ICMSE-2019. The authors will be in the field of Materials so as to contribute its share for Composites submitting their papers to the above journal and at the technological advancements. • Nano-Mechanics & same time will send an E-mail to the conference organizers Dr. B. R. Ambedkar National Institute of Nano-Electronics as well as the Journal Editor stating that the paper has been Track – 03: Track – 04: Technology, Jalandhar presented at ICMSE-2019. The Peer-Review will be Metals, Ceramics, Mechanical Properties Polymers, Bio-Materials • Fracture & Damage performed by the Journal itself. The Institute is named after Bharat Ratan Dr B. R. Ambedkar, founder of Indian Constitution. The institute • Manufacturing of Metal, • Fatigue Registration Fees came into existence in the year 1988 as Regional Polymer, Ceramic Based • Dynamic Fracture At least one author of each accepted paper must register Engineering College on a beautiful campus of about 154 Materials • Dynamic Behavior th by June 5 , 2019 in order for the paper to be included in the acres close to the heart of Jalandhar city. The institute • Materials for Green • Wear proceedings. Student registrations are only acceptable if obtained the status “Institute of National Importance” by Act Technology • Interfaces/Interphases • Tribology and Surface • Creep first author of the paper is a full-time student at an of Parliament in 2007. The institute is located on the G.T Road Amritsar bye-pass at a distance of 15 km from Engineering • Effect of Aggressive Institution. Jalandhar Bus Stand, 12 km from Jalandhar City Railway • Heat Treatment Environment Registration Details Station, and 18 km from Jalandhar Cantt. railway station. • Solidification, Processing • Stress-Strain Behavior & Corrosion • Strain-Rate Dependence The registration fees for attending the conference: The institute is well connected to the National Capital through rail and road link. • Powder Metallurgy • Young’s Modulus, Tensile Participants from Industry INR 10,000 • Additive Manufacturing Strength, Poisson’s Ratio Participants from Academia INR 6,000 Department of Mechanical Engineering • 3-D Printing and Other Properties Attendees Only INR 4,000 The Department of Mechanical engineering was • Welding Student Participants INR 3,000 founded in 1990 and has grown as one of the dynamic Foreign Students USD 150 departments of the Institute over the last three decades. Author Guidelines Foreign Academia USD 300 The department offers B Tech, M Tech and PhD The presenters should submit an abstract of approximately programmes. The B.Tech program is accredited by the Important Dates 300 words withTimes New Roman, 12 point, fonts in NBA. Abstract Submission March 11, 2019 Windows-based Microsoft Word (.doc /.docx) document Acceptance of Abstract April 11, 2019 Call for Papers/Posters through the following easy chair link: https://easychair.org/conferences/?conf=icmse2019 Submission of Full length May 11, 2019 The organizers invite papers from students, teachers, and also by attaching an e-mail to icmse2019@nitj.ac.in Manuscript scientists and researchers in academia and industry to by mentioning the Track No. and Type of Presentation Notification of Acceptance May 20, 2019 present the results of their research and development (i.e., Oral or Poster) in the mail subject with other relevant Registration begins May 25, 2019 efforts in the field of Materials Science and Engineering. Authors Registration ends June 5, 2019 Participant Registration till June 10, 2019 Accommodation Guidelines We request you to have a regular watch on our Delegates will be provided suitable accommodation in the Institute. Conference website for updates. Organizing Committee This accommodation is limited and will be available to registered ST Patron: Prof. L.K. Awasthi, Director, NIT Jalandhar participants on a first come first served basis. Accommodation 1 INTERNATIONAL CONFERENCE ON Chairman: Dr. Pramod Kumar charges will be borne by the delegates. For student delegates, MATERIALS SCIENCE & ENGINEERING Organizing Secretary: Dr. Sumit Sharma/ accommodation will be provided at hostels on campus at nominal ICMSE-2019 Dr. Jai Gopal Gupta charges. Treasurer: Dr. Dinesh Kumar Shukla JUNE 11-12, 2019 Address for Communication Joint Secretaries: Dr. Sumit Sharma, Organizing Secretary, ICMSE 2019 • Dr. D.K. Shukla, HOD • Dr. Ashok Kumar Department of Mechanical Engineering, (ME) • Dr. Dwesh K. Singh Dr B R Ambedkar National Institute of Technology Jalandhar, • Dr. Rajeev Kukreja • Dr. Manoj Kumar Punjab -144011 • Prof. Anand Vaz Phone: +91 –2690301/02, Ext: 3105 • Prof. Subhash Chander • Dr. Rajan Kumar Mobile: +91-8146871758 • Dr. R.S. Bharj • Dr. Nitin Sharma Fax: +91 - 2690320 • Dr. S.K.Tiwari • Dr. Sanjay Email: sharmas@nitj.ac.in • Dr. Raman Bedi • Dr. Satyender Singh icmse2019@nitj.ac.in • Dr. T. Srinivas • Dr. Saurabh Kango • Mr. Ajay Trehan Payment of Fees: • Dr. S.S. Sandhu • Dr. Ranchan Chauhan DD in favour of “ICMSE 2019 Conference” payable at Jalandhar or Advisory Committee Bank Transfer - Account Number: 38254110842 State Bank of India, REC Jalandhar (Branch Code: 50841) Prof. S. P. Singh, IIT Delhi IFSC Code: SBIN0050841 Dr. Navin Kumar, IIT Ropar SWIFT Code: SBININBBP36 Dr. Puneet Mahajan, IIT Delhi MICR Code: 144002065 Prof. P.V. Rao, IIT Delhi Prof. R. K. Pandey, IIT Delhi For further details, please visit the conference Dr. A.K. Darpe, IIT Delhi Dr. S.V. Modak, IIT Delhi website: http://nitj.ac.in/icmse2019 Organized by : Prof. D.P. Mishra, IIT Kanpur Dr. S.K. Mishra, CEO, Brahmos, DRDO Department of Mechanical Engineering Prof. P.M. Padole, NIT Nagpur Prof. B. Karunakaran, IITB, Mumbai Dr B. R. Ambedkar Prof. K. Ramesh Babu, IITM, Chennai National Institute of Technology Prof. K. Sankaranarayana Samy, NIT Tiruchirappalli JALANDHAR-144011 PUNJAB, INDIA International Advisory Committee & • Prof. M.M. Shokrieh, IUST, Iran Department of Mechanical Engineering • Prof. J.N. Reddy, Texas A & M University, USA Govt. Women Engineering College, • Prof. Mohamad Reza Saeb, ICST, Iran Ajmer, Rajasthan 305002
Characterization and Modeling to Control Sintered Ceramic Microstructures and Properties: Proceedings of the 106th Annual Meeting of The American Ceramic Society, Indianapolis, Indiana, USA 2004