AX-Sth_Erratum2.

fm Page 1 Monday, October 5, 2009 4:16 PM

r®
Erratum
To our regret, the AX-Synth owner’s manual requires the following correction.

Page 27, table in the left column

(Old version in the owner’s manual.) (Correct version.)

MIDI messages that can be transmit- MIDI messages that can be transmit-
ted/received ted/received
The most important MIDI messages the AX-Synth can The most important MIDI messages the AX-Synth can
transmit and receive are: transmit and receive are:
Message Remarks Message Remarks
Note On/Off Note On/Off
Velocity Transmission: striking force of the AX-Synth’s Velocity Transmission: striking force of the AX-Synth’s
keys keys
Aftertouch Transmission: channel aftertouch via Aftertouch Transmission: channel aftertouch via
[AFTER¥TOUCH] knob (not from the key- [AFTER¥TOUCH] knob (not from the key-
board). Reception: polyphonic & channel board). Reception: polyphonic & channel
aftertouch. aftertouch.
Program Change Transmission also without changing sounds Program Change Transmission also without changing sounds
on AX-Synth on AX-Synth
Bank Select Transmission: cannot be specified on the Bank Select Transmission: cannot be specified on the
AX-Synth. AX-Synth.
Pitch Bend Transmission: TOUCH CONTROLLER and/or Pitch Bend Transmission: TOUCH CONTROLLER and/or
Please delete D Beam D Beam
this row. Modulation CC01, transmission: MODULATION BAR Modulation CC01, transmission: MODULATION BAR
Volume CC07, transmission: [VOLUME] knob Hold/Sustain CC64, [HOLD] button & optional footswitch
Hold/Sustain CC64, [HOLD] button & optional footswitch connected to [FOOT¥PEDAL]
connected to [FOOT¥PEDAL] CC01~31, CC33~95 Transmission: the control change number
CC01~31, CC33~95 Transmission: the control change number assigned to the D BEAM [ASSIGNABLE] but-
assigned to the D BEAM [ASSIGNABLE] but- ton.
ton.

The AX-Synth’s [VOLUME] knob cannot transmit MIDI messages, because it is analog.

We apologize for the inconvenience this may cause.

602.00.0399 RES 747-09 AX-Synth Erratum - E